Klipsch KG-300 Owners Manual
IN THE BOX
Microphone
KG-300
Gaming Headphone
3 AAA Batteries USB Cable
PS4 Chat Cable
Optical Cable KG-300 Transmitter
Xbox Talkback Cable
Headphone Hanger
PREPARE HEADSET AND TRANSMITTER USE
2
+
++
1 2
1
Place the 3 AAA batteries in the left ear
cup battery compartment
1. Open the battery door by sliding the
door latch (2)
2. Place 3 AAA batteries in the battery
compartment with + of batteries
facing out
3. Close the battery door and ensure it
is latched shut
Note: Replace batteries as needed
Place the microphone connector (1) into the
microphone jack on the left ear cup and twist
clockwise (2) to lock it in place.
Place the posts of the hanger into the
slots on the back of the transmitter and
press down.
CONNECT TO XBOX 360
Mode light on the transmitter should be GREEN.
If not, press MODE button until LED turns GREEN
OPTICAL
USB
3
2
1. Connect the HDMI output from the console to your TV.
2. Connect the Optical Audio connector between the console and the transmitter.
3. Connect USB connector from console to transmitter. Set Xbox output to use the optical output.
Visit Klipsch.com for additional connection options.
1
HDMI
Le voyant de mode de l’émetteur doit être VERT.
Die Modusanzeige am Sender sollte GRÜN sein.
Sinon, appuyez sur le bouton MODE jusqu’à ce que le voyant devienne VERT
Consultez le site Klipsch.com pour des options de connexion supplémentaires
La luz de modalidad del transmisor debe estar VERDE.
Si no lo está, oprima el botón de modalidad (MODE) hasta que el indicador LED se ponga VERDE.
En Klipsch.com hay más opciones de conexión.
La spia della modalità sul trasmettitore deve essere VERDE.
In caso contrario, premere il pulsante MODE finché la spia non si accende in VERDE.
Visitare Klipsch.com per ulteriori opzioni di connessione.
Drücken sie andernfalls die Taste MODE, bis die LED grün leuchtet.
Weitere Anschlussoptionen finden Sie unter Klipsch.com.
A luz indicadora de modo no transmissor deve estar VERDE.
Se não estiver, pressione o botão seletor de modo (MODE) até o LED ficar VERDE.
Visite Klipsch.com para conhecer outras opções de conexão.
نതఝഏ֬൛ᆾ൜֮႒ເ೫è
ݛ҉Ɨφ༶ă൛Ąφ୭ᆷ֥ᆾ൜֮єӵ೫è
۾ئৼࢫ࿑རƗ౯٧ 3TQX[KPKWUè
CONNECT TO PS3
Mode light on the transmitter should be AMBER.
If not, press MODE button until LED turns AMBER
OPTICAL
USB
1. Connect PS3 to TV using HDMI Connector
2. Connect Transmitter to PS3 using the Digital Optical Cable or
connect it to TV using the Digital Optical Cable
3. Connect the USB cable between the PS3 and Transmitter
3
2
HDMI
1
Set the PS3 Audio settings to use the Optical Output for game audio.
Set the Chat and Mic audio to use the USB port.
Le voyant de mode de l’émetteur doit être ORANGE.
Die Modusanzeige am Sender sollte GELB sein.
Sinon, appuyez sur le bouton MODE jusqu’à ce que le voyant devienne ORANGE
La luz de modalidad del transmisor debe estar ÁMBAR.
Si no lo está, oprima el botón de modalidad (MODE) hasta que el indicador LED
se ponga ÁMBAR.
La spia della modalità sul trasmettitore deve essere AMBRA.
In caso contrario, premere il pulsante MODE finché la spia non si accende
in AMBRA.
Drücken sie andernfalls die Taste MODE, bis die LED gelb leuchtet.
A luz indicadora de modo no transmissor deve estar AMARELA.
Se não estiver, pressione o botão seletor de modo (MODE) até o LED ficar
AMARELO.
نതఝഏ֬൛ᆾ൜֮႒ເߢޔ೫è
ݛ҉Ɨφ༶ă൛Ąφ୭ᆷ֥ᆾ൜֮єӵߢޔ೫è
CONNECT TO PS4
Mode light on the transmitter should be AMBER.
If not, press MODE button until LED turns AMBER
OPTICAL
1. Connect PS4 to TV using HDMI Connector
2. Connect Transmitter to PS4 using the Digital Optical Cable or
connect it to TV using the Digital Optical Cable
3. Connect the USB cable between the PS4 and Transmitter
USB
HDMI
3
2
1
Go to Settings > Screen and Sound > Audio Output Settings > Primary
Output Port. Select “Digital Out” (OPTICAL). Select ONLY “Dolby
Digital 5.1ch”. Then go to Settings > Sound and Screen > Audio Output
Settings > Output to Headphones and select “Chat Audio”. Go to
Settings > Sound and Screen > Audio Output Settings > Audio Format
(Priority) and select “Bitstream (Dolby)”.
Le voyant de mode de l’émetteur doit être ORANGE.
Die Modusanzeige am Sender sollte GELB sein.
Sinon, appuyez sur le bouton MODE jusqu’à ce que le voyant devienne ORANGE
La luz de modalidad del transmisor debe estar ÁMBAR.
Si no lo está, oprima el botón de modalidad (MODE) hasta que el indicador LED
se ponga ÁMBAR.
La spia della modalità sul trasmettitore deve essere AMBRA.
In caso contrario, premere il pulsante MODE finché la spia non si accende
in AMBRA.
Drücken sie andernfalls die Taste MODE, bis die LED gelb leuchtet.
A luz indicadora de modo no transmissor deve estar AMARELA.
Se não estiver, pressione o botão seletor de modo (MODE) até o LED ficar
AMARELO.
نതఝഏ֬൛ᆾ൜֮႒ເߢޔ೫è
ݛ҉Ɨφ༶ă൛Ąφ୭ᆷ֥ᆾ൜֮єӵߢޔ೫è
Loading...