71 YEARS AGO THE GENESIS OF SOMETHING VERY SPECIAL OCCURRED IN A TINY TIN SHED IN HOPE, ARKANSAS
In 1946 Paul W. Klipsch – genius, madman and maverick
– designed and hand-built the legendary Klipschorn® loudspeaker with the goal of bringing live music into his living room. He was an American audio pioneer and a true eccentric. PWK gave rise to speaker technologies that would forever impact generations of music lovers.
Today, in this honored tradition, we move forward, pushing the boundaries of art and science – while driving new technologies to deliver an ever-incredible listening experience.
Remember great sound? We never forgot.
We are THE KEEPERS OF THE SOUND®
TABLE OF CONTENTS
PERMANENT |
LANDSCAPE |
||
KI SERIES |
5 |
LANDSCAPE SERIES |
20 |
KPT SUBWOOFER |
9 |
PRO ROCK SERIES |
22 |
DISTRIBUTED |
SPECIALTY |
||
COMPACT PERFORMANCE SERIES |
11 |
REFERENCE SOUND BARS |
25 |
COMMERCIAL ALL-WEATHER SERIES |
12 |
REFERENCE PREMIERE DESIGNER ON-WALL |
27 |
IN-CEILING |
14 |
THX® CINEMA SERIES |
29 |
|
|
DESIGNER SERIES |
32 |
AMPLIFIERS |
CUSTOM SERIES |
34 |
|
MULTI-ZONE |
18 |
REFERENCE SUBWOOFERS |
37 |
|
|
|
|
WHY KLIPSCH?
Every Klipsch speaker is driven by the four critical philosophies of speaker design - pioneered by our founder, Paul W. Klipsch.
HIGH EFFICIENCY
The highest sound output for a given wattage input
LOW DISTORTION
Even the softest sounds are heard with clarity and detail, the loudest sounds without harshness or distortion
CONTROLLED DIRECTIVITY
The accurate projection of sound which, in turn, allows even distribution of sound in a given area
CONTROLLED FREQUENCY RESPONSE
Producing the required response to maximize various acoustic environments
KI SERIES PERMANENT INSTALL SPEAKERS
When Paul W. Klipsch introduced speakers such as the Klipschorn®, LaScala®, Heresy® and Cornwall to the world, they not only became popular for home audio enjoyment but were utilized in many permanent commercial installations such as houses of worship, schools, studios and music clubs - due to their clean, high output/ low-distortion sound signatures. Today, our new KI line of Permanent Installation speakers is built not only to the Klipsch standards of high efficiency and low distortion but to address the specific needs and performance standards of the commercial industry with rock-solid reliability.
Tractrix® Horn-loaded Titanium compression drivers deliver detailed high and midrange frequencies in specifically controlled patterns. Woofers with large motor structures provide tight, musical-quality low frequencies. High current full-range passive crossovers allow high performance, while our exclusive
KLIP-Circuit driver protection provides day-in/day-out reliability. Multiple flypoint cabinets are built for both resonance-free response and years of premium performance with dado lock-joint and rabbet construction. And little to no added equalization is needed for a KI speaker’s prime sound quality to shine through.
KI Series low frequency systems are built to provide superior musical reinforcement and are capable of maximum driver excursion with very high output without undue stress on their drivers.
•Very high output capability with exceptional low-distortion clarity
•Compact 22.5º symmetrical trapezoidal design
•16 suspension points (4 per side)
for flexible mounting and rigging bar compatibility
•Weatherization, stand adapter, handles and Neutrik® NL4 speakONs available as special order options. Ask for details.
KI-396-SMA-II HIGH OUTPUT 15” 2-WAY
FREQUENCY RESPONSE1 (+/- 3 dB) |
60 Hz - 18 kHz (-10 dB @ 35 Hz) |
|
|
POWER HANDLING2 |
600 watts (56V) | |
2400 watts peak |
|
MAXIMUM SPL3 |
127 dB Continuous |
| 133 dB Peak |
|
SENSITIVITY4 |
101 dB |
|
|
COVERAGE |
Horizontal: 90° +/- 30º 400 Hz - 13 kHz | Vertical: 60° +/- 20º 1.6 kHz - 20 kHz |
||
|
|
|
|
DIRECTIVITY INDEX (DI) |
8 dB +/- 2 dB 1.6 kHz - 20 kHz |
|
|
|
|
|
|
DIRECTIVITY FACTOR (Q) |
6.3 |
|
|
|
|
|
|
NOMINAL IMPEDANCE |
8 ohms, minimum 5.1 ohms @ 112 Hz |
|
|
|
|
|
|
CROSSOVER FREQUENCY |
1 kHz |
|
|
|
|
||
COMPONENTS |
One K-48-ST 15” woofer | One K-691 3” titanium compression driver on a K-510 horn |
||
|
|
|
|
INPUT CONNECTION |
Two point barrier strip |
|
|
|
|
|
|
MOUNTING OPTION |
Sixteen 3/8”-16 flypoints |
|
|
|
|
|
|
BRACKET MOUNT |
One attachment point for C-bracket |
| Top and Bottom: 3/8”-16 |
|
|
|
|
|
ENCLOSURE MATERIAL |
3/4” 7-ply birch plywood cabinet | |
1” MDF motorboard |
|
HEIGHT |
34.3” (87.12cm) |
|
|
|
|
||
WIDTH |
19.8” (50.29cm) front | 6.8” (17.27cm) rear |
||
DEPTH |
16” (40.64cm) |
|
|
|
|
|
|
WEIGHT |
76 lbs. (34.54kg) |
|
|
|
|
|
|
FINISHES |
Black, White and Raw Birch |
|
|
|
|
|
|
THE TRACTRIX® CURVE
Klipsch uses a modified Tractrix® equation horn geometry on its distributed audio speakers which gains the benefits of three distinct horn types and allows the sound wave to release from the horn with minimal reflections back into the horn. This, combined with the reduced depth of the Tractrix® horn in relation to others, further reduces distortion and improves frequency response and overall sound clarity, even at low background volumes.
TRACTRIX EXPONENTIAL CONICAL HYPERBOLIC
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 82 lbs
PART NUMBER
1062027 (Black)
1062028 (White)
1062029 (Raw Birch)
NOTES:
5
KLIPSCH | PERMANENT INSTALLATIONS |
KI SERIES PERMANENT INSTALL SPEAKERS |
|
|
•Rotatable midrange and HF drivers for 60º or 90º projection independent of speaker horizontal/vertical
•Compact 22.5º symmetrical trapezoidal design
•16 suspension points (4 per side) for flexible mounting and rigging bar compatibility
•Weatherization, stand adapter, handles and Neutrik® NL4 speakONs available as special order options. Ask for details.
KI-362-SMA-II TRAPEZOIDAL 15” 3-WAY
FREQUENCY RESPONSE1 (+/- 3 dB) |
54 Hz - 20 kHz (-10 dB @ 38 Hz) |
|
|
POWER HANDLING2 |
400 watts (42V) | |
1600 watts peak |
|
MAXIMUM SPL3 |
124 dB Continuous |
| 130 dB Peak |
|
SENSITIVITY4 |
101 dB |
|
|
COVERAGE |
Horizontal: 90° +/- 30º 400 Hz - 16 kHz | Vertical: 50° +/- 20º 2.8 kHz - 20 kHz |
||
|
|
|
|
DIRECTIVITY INDEX (DI) |
8 dB +/- 2 dB 500 Hz - 20 kHz |
|
|
|
|
|
|
DIRECTIVITY FACTOR (Q) |
6.3 |
|
|
|
|
|
|
NOMINAL IMPEDANCE |
8 ohms, minimum 4.4 ohms @ 106 Hz |
|
|
|
|
|
|
OVERLOAD PROTECTION |
KLIP Overload Protection Circuit-HF |
|
|
|
|
|
|
CROSSOVER FREQUENCY |
1.26 kHz and 6.8 kHz |
|
|
|
|
||
COMPONENTS |
One K-48-ST 15” woofer | One K-53-TI 1.5” titanium compression driver on a K-703-M horn |
||
|
| One K-100-TI 1” titanium compression driver on a K-79-T horn |
||
|
|
|
|
INPUT CONNECTION |
Two point barrier strip |
|
|
|
|
|
|
MOUNTING OPTION |
Sixteen 3/8”-16 flypoints |
|
|
|
|
|
|
BRACKET MOUNT |
One attachment point for C-bracket |
| Top and Bottom: 3/8”-16 |
|
|
|
|
|
ENCLOSURE MATERIAL |
3/4” 7-ply birch plywood cabinet | |
1” MDF motorboard |
|
|
|
|
|
HEIGHT |
34.3” (87.12cm) |
|
|
|
|
||
WIDTH |
19.8” (50.29cm) front | 6.8” (17.27cm) rear |
||
|
|
|
|
DEPTH |
16” (40.64cm) |
|
|
|
|
|
|
WEIGHT |
70 lbs. (31.81kg) |
|
|
|
|
|
|
FINISHES |
Black, White and Raw Birch |
|
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 83 lbs
PART NUMBER
1062024 (Black)
1062025 (White)
1062026 (Raw Birch)
NOTES:
KLIPSCH “MUMPS” TRACTRIX® HORNS
The addition of ellipses or “mumps” molded into calculated areas of the Tractrix® horn on the KI-102-SMA-II, KI-172-SMA-II, KI-396-SMA-II and KI-362-SMA-II
further enhances even frequency dispersion across the horn’s coverage area by modifying the profile of the horn’s shape to prevent lower-frequency sounds from “pulling away” from the horn’s boundary. This patented geometric design
allows all horn-generated frequencies to follow the horn curvature and provides the most even total coverage in a given area.
KI-272-SMA-II MULTI-ANGLE 12” 2-WAY
•Multiple angle 45º and 65º asymmetrical design two-way speaker
•Perfect for angled wall, corner, ceiling or under-balcony mounting
•12 suspension points
•Accepts SB-262 C-Mount Bracket
•Weatherization, stand adapter, handles and Neutrik® NL4 speakONs available as special order options. Ask for details.
1 3M, Half-space anechoic
2 AES standard, continuous pink noise, 6dB peaks
3 Calculated at 1M half-space at power handling power input 4 SPL at 1M, half-space anechoic with 2.83 volts input
FREQUENCY RESPONSE1 (+/- 3 dB) |
65 Hz - 20 kHz (-10 dB @ 47 Hz) |
|
||
POWER HANDLING2 |
300 watts (35V) | |
1200 watts peak |
|
|
MAXIMUM SPL3 |
121 dB Continuous |
| 127 dB Peak |
|
|
SENSITIVITY4 |
100 dB |
|
|
|
COVERAGE |
Horizontal: 40° +/- 20º |
3.5 kHz - 20 kHz | Vertical: 60° +/- 20º 2 kHz - 20 kHz |
||
|
|
|
||
DIRECTIVITY INDEX (DI) |
9 dB +/- 3 dB 2 kHz - 20 kHz |
|
||
|
|
|
|
|
DIRECTIVITY FACTOR (Q) |
7.9 |
|
|
|
|
|
|
||
NOMINAL IMPEDANCE |
8 ohms, minimum 4 ohms @ 146 Hz |
|
||
|
|
|
||
OVERLOAD PROTECTION |
KLIP Overload Protection Circuit-HF |
|
||
|
|
|
|
|
CROSSOVER FREQUENCY |
900 Hz |
|
|
|
|
|
|
||
COMPONENTS |
One K-281-EP 12” woofer |
| One K-70-G 1.75” titanium compression driver on a K-604 horn |
||
|
|
|
|
|
INPUT CONNECTION |
Two point barrier strip |
|
|
|
|
|
|
||
MOUNTING OPTION |
Twelve 3/8”-16 flypoints |
| Two 5/16”-18 threaded holes (top and bottom) for C-bracket |
||
|
|
|
||
BRACKET MOUNT |
One attachment point for C-bracket |
| Top and Bottom: 3/8”-16 |
||
|
|
|
||
ENCLOSURE MATERIAL |
3/4” 7-ply birch plywood cabinet | |
1” MDF motorboard |
||
|
|
|
|
|
HEIGHT |
17” (43.18cm) |
|
|
|
WIDTH |
23” (58.42cm) |
|
|
|
|
|
|
|
|
DEPTH |
15.8” (40.13cm) |
|
|
|
WEIGHT |
51 lbs. (23.18kg) |
|
|
|
|
|
|
||
FINISHES |
Black, White and Raw Birch |
|
||
ACCESSORIES |
SB-262 C-Mount Bracket |
|
|
6 |
FOR THE LATEST SPECIFICATIONS VISIT KLIPSCH.COM/PRO |
|
|
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 54 lbs
PART NUMBER
1062021 (Black)
1062022 (White)
1062023 (Raw Birch)
NOTES:
•Internal high current full-range crossover
•60º X 40º Modified Tractrix® Horn for tight pattern control
•Compact 22.5º symmetrical trapezoidal design
•16 suspension points
•Accepts SB-262 C-Mount Bracket
•Weatherization, stand adapter, handles and Neutrik® NL4 speakONs available as special order options. Ask for details.
KI-262-SMA-II TRAPEZOIDAL 12” 2-WAY
FREQUENCY RESPONSE1 (+/- 3 dB) |
71 Hz - 20 kHz (-10 dB @ 57 Hz) |
|
POWER HANDLING2 |
300 watts (35V) | |
1200 watts peak |
MAXIMUM SPL3 |
121 dB Continuous |
| 127 dB Peak |
SENSITIVITY4 |
100 dB |
|
COVERAGE |
Horizontal: 60° +/- 15º 2 kHz - 20 kHz | Vertical: 40° +/- 20º 4 kHz - 20 kHz |
|
|
|
|
DIRECTIVITY INDEX (DI) |
9 db +/- 2 db 2kHz - 20 kHz |
|
|
|
|
DIRECTIVITY FACTOR (Q) |
7.9 |
|
|
|
|
NOMINAL IMPEDANCE |
8 ohms, minimum 4.1 ohms @ 152 Hz |
|
OVERLOAD PROTECTION |
KLIP Overload Protection Circuit-HF |
|
|
|
|
CROSSOVER FREQUENCY |
900 Hz |
|
COMPONENTS |
One K-281-EP 12” woofer | One K-70-G 1.75” titanium compression driver on a K-604 horn |
|
|
|
|
INPUT CONNECTION |
Two point barrier strip |
|
|
|
|
MOUNTING OPTION |
Sixteen 3/8”-16-thread flypoints |
|
|
|
|
ENCLOSURE MATERIAL |
3/4” 7-ply birch plywood cabinet | 1” MDF motorboard |
|
|
|
|
HEIGHT |
23” (58.42cm) |
|
|
|
|
WIDTH |
17” (43.18cm) front |
| 6.8” (17.27cm) rear |
|
|
|
DEPTH |
12.6” (32.03cm) |
|
|
|
|
WEIGHT |
49 lbs. (22.27kg) |
|
|
|
|
FINISHES |
Black, White and Raw Birch |
|
|
|
|
ACCESSORIES |
SB-262 C-Mount Bracket |
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 49 lbs
PART NUMBER
1062018 (Black)
1062019 (White)
1062020 (Raw Birch)
NOTES:
KI-102-SMA-II with SB-102 Bracket
•115dB maximum output
•90º X 90º Tractrix® Horn
•Compact 22.5º symmetrical trapezoidal design
•Top/Bottom attachments for optional Klipsch SB-102 U-shaped bracket
•Weatherization, stand adapter, handles and Neutrik® NL4 speakONs available as special order options. Ask for details.
ALSO AVAILABLE
KI-102-T-SMA-II with a 70 Volt, 60 Watt transformer
SB-262 C-BRACKET
This adjustable wall or ceiling mounting kit permits safe, secure mounting of the loudspeaker under balconies, overhangs and ceilings. Compatible with KI-262-SMA-II and KI-272-SMA-II
KI-102-SMA-II |
TRAPEZOIDAL 8 ” 2-WAY |
SHIPPING QUANTITY: Single |
|||||
|
|
||||||
|
|
|
|
|
SHIPPING WEIGHT: 25.5 lbs |
||
FREQUENCY RESPONSE1 (+/- 3 dB) |
88 Hz - 17 kHz (-10 dB @ 56 Hz) |
|
|||||
|
|
||||||
POWER HANDLING2 |
200 watts (31V) | |
800 watts peak |
|
PART NUMBER |
|||
MAXIMUM SPL3 |
115 dB Continuous |
| 121 dB Peak |
1061960 (Black) |
||||
SENSITIVITY4 |
95 dB |
|
|
|
|||
|
|
|
1061961 (White) |
|
|||
COVERAGE |
Horizontal: 90° +/- 20º |
2.1 kHz - 19 kHz | Vertical: 90° +/- 30º 2.5 kHz - 19 kHz |
|
|
|||
1061962 (Raw MDF) |
|||||||
|
|
|
|
|
|||
DIRECTIVITY INDEX (DI) |
7 db +/- 1 db 1 kHz - 17 kHz |
||||||
|
|
||||||
|
|
|
|
|
|
|
|
DIRECTIVITY FACTOR (Q) |
5 |
|
|
|
|
|
|
|
|
|
|
|
|||
NOMINAL IMPEDANCE |
8 ohms, minimum 4.9 ohms @ 184 Hz |
NOTES: |
|||||
|
|
|
|
|
|||
OVERLOAD PROTECTION |
KLIP Overload Protection Circuit-HF |
||||||
|
|
||||||
|
|
||||||
|
|
|
|
|
|
|
|
CROSSOVER FREQUENCY |
2 kHz |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
||
COMPONENTS |
One K-81-ST 8” woofer | |
One K-103-TI-KP 1” titanium compression driver on a K-802-M horn |
|
|
|||
|
|
||||||
|
|
|
|
|
|
||
INPUT CONNECTION |
Two point barrier strip |
|
|
|
|
||
|
|
|
|
||||
|
|
|
|
|
|||
MOUNTING OPTION |
2 screw: 1/4” x 20 Machine screw for SB-102 Bracket |
|
|
||||
|
|
||||||
|
|
|
|
|
|
|
|
ENCLOSURE MATERIAL |
3/4” MDF |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
HEIGHT |
18.9” (48.00cm) |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
||
WIDTH |
11.6” (29.46cm) front | |
4.2” (10.67cm) rear |
|
|
|||
|
|
||||||
|
|
|
|
|
|
|
|
DEPTH |
9.3” (23.77cm) |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
WEIGHT |
24 lbs. (10.90kg) |
|
|
|
|
|
|
|
|
|
|
|
|||
FINISHES |
Black, White and Raw MDF |
|
|
||||
|
|
|
|
|
|
||
ACCESSORIES |
SB-102 Mounting Bracket |
|
|
|
|
3 DIFFERENT FINISHES
Klipsch’s KI Series Permanent Installation
Speakers offer three finish options available for all models: Raw Birch, White and Black
7
KLIPSCH | PERMANENT INSTALLATIONS |
KI SERIES PERMANENT INSTALL SPEAKERS |
|
|
KI-172-SMA-II with SB-102 Bracket
•Compact with sides slanted at 65º and 45º
•90º X 90º Modified Tractrix® Horn
•8” woofer and 1” titanium diaphragm highfrequency compression driver
•Top/Bottom attachments for optional Klipsch SB-102 U-shaped bracket
•Weatherization, stand adapter, handles and Neutrik® NL4 speakONs available as special order options. Ask for details.
KI-172-SMA-II MULTI-ANGLE 8” 2-WAY
FREQUENCY RESPONSE1 (+/- 3 dB) |
74 Hz - 17 kHz (-10 dB @ 48 Hz) |
|
POWER HANDLING2 |
200 watts (31V) | |
800 watts peak |
MAXIMUM SPL3 |
115 dB Continuous |
| 121 dB Peak |
SENSITIVITY4 |
95 dB |
|
COVERAGE |
Horizontal: 90° +/- 30º 2.5 kHz - 20 kHz | Vertical: 90° +/- 20º 2.1 kHz - 20 kHz |
|
|
|
|
DIRECTIVITY INDEX (DI) |
7 db +/- 1.5 db 900 Hz - 18 kHz |
|
|
|
|
DIRECTIVITY FACTOR (Q) |
5 |
|
|
|
|
NOMINAL IMPEDANCE |
8 ohms, minimum 4.7 ohms @ 184 Hz |
|
OVERLOAD PROTECTION |
KLIP Overload Protection Circuit-HF |
|
|
|
|
CROSSOVER FREQUENCY |
2 kHz |
|
COMPONENTS |
One K-81-ST 8” woofer | One K-103-TI-KP 1” titanium compression driver on a K-802-M horn |
|
|
|
|
INPUT CONNECTION |
Two point barrier strip |
|
|
|
|
MOUNTING OPTION |
4 - 1/4”- 20 for Mounting Bracket | 2 - 1/4”- 20 for SB-102 Bracket |
|
|
|
|
ENCLOSURE MATERIAL |
3/4” MDF |
|
|
|
|
HEIGHT |
11.5” (29.27cm) |
|
|
|
|
WIDTH |
18.9” (48.00cm) |
|
|
|
|
DEPTH |
10.6” (26.92cm) |
|
|
|
|
WEIGHT |
27 lbs. (12.24kg) |
|
|
|
|
FINISHES |
Black, White and Raw MDF |
|
|
|
|
ACCESSORIES |
SB-102 Mounting Bracket |
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 28 lbs
PART NUMBER
1062008 (Black)
1062009 (White)
1062010 (Raw MDF)
NOTES:
WEATHERIZATION
Klipsch KI Wood Enclosures Now Available with Full Weatherization
•Dual 15” (38.1cm) cast frame transducers with 3” voice coils
•130 dB SPL maximum output
•22.5º symmetrical trapezoidal design make it an ideal music reinforcement - match with the KI-396, KI-262 and KI-272 when using an external, active crossover
•16 suspension points for flexible mounting and rigging bar compatibility
•Weatherization, stand adapter, handles and Neutrik® NL4 speakONs available as special order options. Ask for details.
8
KI-215-SMA-II TRAPEZOIDAL DUAL 15” SUBWOOFER
FREQUENCY RESPONSE1 (+/- 3 dB) |
70 Hz - 2.4 kHz (-10 dB @ 53 Hz) |
|
POWER HANDLING |
800 watts (53V) | |
3200 watts peak |
|
|
|
MAXIMUM SPL3 |
130 dB Continuous |
| 136 dB Peak |
SENSITIVITY4 |
105 dB |
|
NOMINAL IMPEDANCE |
8 ohms, minimum 3.5 ohms @ 42 Hz |
|
COMPONENTS |
Two K-45-ST 15” woofers |
|
|
|
|
INPUT CONNECTION |
Two point barrier strip |
|
|
|
|
MOUNTING OPTION |
Sixteen 3/8”- 16 flypoints |
|
|
|
|
BRACKET MOUNT |
One attachment point for C-bracket Top and Bottom: 3/8” - 16 |
|
|
|
|
ENCLOSURE MATERIAL |
3/4” 7-ply birch plywood cabinet | 1” MDF motorboard |
|
|
|
|
HEIGHT |
34.3” (87.12cm) |
|
|
|
|
WIDTH |
19.8” (50.29cm) front | 6.8” (17.27cm) rear |
|
|
|
|
DEPTH |
16” (40.64cm) |
|
|
|
|
WEIGHT |
81 lbs. (36.82kg) |
|
|
|
|
FINISHES |
Black, White and Raw Birch |
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 84 lbs
PART NUMBER
1062014 (Black)
1062015 (White)
1062017 (Raw Birch)
NOTES:
1 3M, Half-space anechoic
2 AES standard, continuous pink noise, 6dB peaks
KI-215-SMA-II with two KI-362-SMA-IIs 3 Calculated at 1M half-space at power handling power input 4 SPL at 1M, half-space anechoic with 2.83 volts input
FOR THE LATEST SPECIFICATIONS VISIT KLIPSCH.COM/PRO
•High power 15” (38.1cm) low frequency speaker system
•104 oz. (2.95kg) magnet with 3” (7.62cm) voice coil for high sensitivity and superior power handling
•Four suspension points
•Weatherization, stand adapter, handles and Neutrik® NL4 speakONs available as special order options. Ask for details.
•Dual 18” (45.7cm) cast frame transducers with 3” voice coils
•132 dB SPL maximum output
•Extended low frequency response (-3dB,
34Hz, -10dB 25Hz unequalized)
•4 suspension points
KI-115-SMA-II SINGLE 15” SUBWOOFER
FREQUENCY RESPONSE1 (+/- 3 dB) |
49 Hz - 200 kHz (-10 dB @ 35 Hz) |
||
POWER HANDLING2 |
400 watts (44.7V) |
| |
1600 watts peak |
MAXIMUM SPL3 |
124 dB Continuous |
| |
130 dB Peak |
SENSITIVITY4 |
101 dB |
|
|
NOMINAL IMPEDANCE |
8 ohms, minimum 5 ohms @ 39 Hz |
||
|
|
||
COMPONENTS |
One K-48-ST 15” woofer |
||
|
|
||
INPUT CONNECTION |
Two point barrier strip |
||
|
|
||
MOUNTING OPTION |
Four 3/8”-16-threaded flypoints |
||
|
|
||
ENCLOSURE MATERIAL |
3/4” 7-ply birch plywood cabinet |
||
|
|
|
|
HEIGHT |
18.5” (46.99cm) |
|
|
|
|
|
|
WIDTH |
24.6” (62.48cm) |
|
|
|
|
|
|
DEPTH |
19.2” (48.77cm) |
|
|
|
|
|
|
WEIGHT |
59 lbs. (26.8kg) |
|
|
|
|
||
FINISHES |
Black, White and Raw Birch |
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 62 lbs
PART NUMBER
1062011 (Black)
1062012 (White)
1062013 (Raw Birch)
NOTES:
KLIP-CIRCUIT DRIVER PROTECTION
To limit potential damage to high and mid-frequency drivers, all Klipsch KI Series speakers with internal fullrange, high-current passive crossovers feature the KLIP-circuit, a proprietary high-power overload system. When current to a driver is exceeded it changes its resistance to a high value and reduces the current to protect the driver from damage. When input is reduced it returns to normal and allows the driver to play again.
KPT-684-SMA DUAL 18” SUBWOOFER
FREQUENCY RESPONSE1 (+/- 3 dB) 34 Hz - 800Hz (-10 dB @ 25 Hz)
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 157 lbs
POWER HANDLING2 |
600 watts (65V) per woofer | 2400 watts peak per woofer |
|
PART NUMBER |
||
MAXIMUM SPL3 |
132 dB Continuous | 138 dB peak |
|
|
|
1060114 (Black) |
SENSITIVITY4 |
105 dB |
|
|
|
|
NOMINAL IMPEDANCE |
8 ohms, 3.6 ohms minimum @ 22Hz |
| |
woofers wired in parallel |
|
|
|
|
|
|
|
|
COMPONENTS |
Two K-47-EP2 18” woofers |
|
|
|
NOTES: |
INPUT CONNECTION |
Four point barrier strip |
|
|
|
|
|
|
|
|
|
|
MOUNTING OPTION |
Four 3/8” - 16 flypoints on top panel |
|
|
|
|
|
|
|
|
|
|
ENCLOSURE MATERIAL |
.75” (19mm) 7-ply plywood cabinet |
| |
1” (2.54cm) 9-ply birch plywood motorboard |
|
|
|
|
|
|
|
|
HEIGHT |
48.75” (123.83cm) |
|
|
|
|
|
|
|
|
|
|
WIDTH |
23.5” (59.7cm) |
|
|
|
|
|
|
|
|
|
|
DEPTH |
30.5” (77.47cm) |
|
|
|
|
|
|
|
|
|
|
WEIGHT |
155 lbs. (70.4kg) |
|
|
|
|
|
|
|
|
|
|
FINISHES |
Black |
|
|
|
|
|
|
|
|
|
|
1 3M, Half-space anechoic
2 AES standard, continuous pink noise, 6dB peaks
3 Calculated at 1M half-space at power handling power input 4 SPL at 1M, half-space anechoic with 2.83 volts input
9
COMPACT PERFORMANCE SERIES
The CP-T Speaker Series maintains the classic Klipsch signature sound in a sleek, weather-resistant design. Compact, stylish cabinets blend into almost any environment and up-front, one-screwdriver connections make the most efficient use of your valuable time. Unique, front-attach, integrated brackets combined with V-shaped rear profile cabinets allow the speakers to almost disappear tightly in a corner. Exclusive Tractrix® horns provide unmatched low-distortion, highly detailed sound and combine with long-throw woofers for excellent dynamics at any volume level. Solid, talc-filledcabinetswithaluminumgrillesandstainlesssteelhardwarewillmaketheCP-TSpeakerSeries your perfect “Everyday Speakers” indoors or out.
•.75” Aluminum tweeter mated to a 90º x 90º Tractrix® Horn
•3.5” long-throw woofer
•Front access, one-screwdriver installation of bracket and wiring
•Tool-free angle adjustment
CP-4T COMPACT FULL-RANGE 3.5” 2-WAY
FREQUENCY RESPONSE1 (+/- 3 dB) |
100 Hz - 22 kHz |
POWER HANDLING2 |
5 watts fixed @ 70V | 10 watts fixed @ 100V |
MAXIMUM SPL3 |
94 dB @ 70V | 97 dB @ 100V |
SENSITIVITY4 |
91 dB |
TWEETER |
.75” (1.9cm) aluminum compression driver |
|
|
HIGH FREQUENCY HORN |
90˚ x 90˚ Tractrix® Horn |
WOOFER |
3.5” (8.9cm) long-throw IMG woofer |
|
|
CROSSOVER FREQUENCY |
3.2kHz |
|
|
TAP SETTINGS |
5 watts fixed @ 70V | 10 watts fixed @ 100V |
|
|
ENCLOSURE TYPE |
Bass-reflex via dual front-firing ports |
|
|
ENCLOSURE MATERIAL |
Talc-filled PPC |
|
|
DIMENSIONS |
8.8” (22.4cm) H x 5.5” (14.0cm) W x 4.7” (11.9cm) D |
DIMENSIONS WITH WALL MOUNT |
8.8” (22.4cm) H x 5.5” (14.0cm) W x 5.5” (14.0cm) D |
|
|
WEIGHT |
4.8 lbs. (2.2kg) |
FINISHES |
Black/White enclosure and grille |
|
|
WIRE GAUGE ACCOMODATED |
16 |
SHIPPING QUANTITY: 1 Pair
SHIPPING WEIGHT: 11 lbs
PART NUMBER
1016296 (Black)
1060386 (White)
NOTES:
•.75” Aluminum tweeter mated to a 90º x 90º Tractrix® Horn
•5.25” long-throw woofer
•Front access, one-screwdriver installation of bracket and wiring
ALSO AVAILABLE
CP-6: Low impedance version
EASY ONE SCREWDRIVER INSTALLATION
Klipsch Compact Performance Series speakers allow you to attach the bracket to the wall or in the corner, push the speaker onto the first notch of the bracket, channel the wire to the front and attach, handset the desired speaker/bracket angle without additional tools, push the speaker to the last bracket notch and screw down the bracket. Not only a fast, up-front install but gives a clean, uniform look that essentially integrates the speaker and bracket together as one.
CP-6 T COMPACT FULL-RANGE MULTI-TAP 5.25” 2-WAY
FREQUENCY RESPONSE1 (+/- 3 dB) |
83 Hz - 22 kHz |
|
POWER HANDLING2 |
75 watts |
| 300 watts peak |
MAXIMUM SPL3 |
111 dB | |
117 dB peak |
SENSITIVITY4 |
94 dB* |
|
NOMINAL IMPEDANCE |
8 ohm* |
|
|
|
|
TWEETER |
.75” (1.9cm) aluminum compression driver |
|
|
|
|
HIGH FREQUENCY HORN |
90˚ x 90˚ Tractrix® Horn |
|
WOOFER |
5.25” (13.3cm) long-throw IMG woofer |
|
|
|
|
CROSSOVER FREQUENCY |
3kHz |
|
|
|
|
TAP SETTINGS |
3.75 watts, 7.5 watts, 15 watts, 30 watts @ 70V | 7.5 watts, 15 watts, 30 watts @ 100V |
|
|
|
|
ENCLOSURE TYPE |
Bass-reflex via dual front-firing ports |
|
|
|
|
ENCLOSURE MATERIAL |
Talc-filled PPC |
|
|
|
|
DIMENSIONS |
11.0” (27.9cm) H x 7.0” (17.8cm) W x 6.1” (15.5cm) D |
|
|
|
|
DIMENSIONS WITH WALL MOUNT |
11.0” (27.9cm) H x 7.0” (17.8cm) W x 6.9” (17.5cm) D |
|
|
|
|
WEIGHT |
6.9 lbs. (3.1kg) |
|
|
|
|
FINISHES |
Black/White enclosure and grille |
|
|
|
|
WIRE GAUGE ACCOMODATED |
16 |
|
SHIPPING QUANTITY: 1 Pair
SHIPPING WEIGHT: 17.2 lbs
PART NUMBER
1016298 (Black)
1060388 (White)
NOTES:
11
KLIPSCH | DISTRIBUTED AUDIO |
COMMERCIAL ALL-WEATHER SERIES |
|
|
COMMERCIAL ALL-WEATHER SERIES
For years, Klipsch CA Series speakers have set the proper mood for small boutiques to mega sports bars to outdoor malls in thousands of installations around the world. Whether on their own or enhanced with their matching subwoofer, they are known for high-performance in both sound and durability. 90° x 90° Tractrix® horns allow the speakers to be mounted horizontally or vertically without affecting coverage patterns. High-quality multi-tap transformers with 8 ohm bypasses let clean, realistic bass shine through at all volume levels. All models are in durable, UV-resistant all-weather Black or White paintable enclosures complimented by high-strength, zinc C-brackets.
•1” titanium driver mated to a 90º X 90º Tractrix® Horn
•Built-in 30-Watt, 70V/100V high quality multi-tap transformer with 8-ohm bypass
•Paintable UV-resistant ABS enclosure with rustproof aluminum grille
•Supplied with C-style mounting bracket and stainless steel hardware
CA-525-T |
FULL-RANGE 5.25” 2-WAY |
|
|
FREQUENCY RESPONSE1 (+/- 4 dB) 75 Hz - 20 kHz |
|
POWER HANDLING2 |
75 watts (19V) | 300 watts peak |
MAXIMUM SPL3 |
110 dB | 116 dB peak |
SENSITIVITY4 |
94 dB |
NOMINAL IMPEDANCE |
8 ohm* |
|
|
TWEETER |
1” (2.54cm) titanium diaphragm compression driver |
|
|
HIGH FREQUENCY HORN |
90˚ x 90˚ Tractrix® Horn |
WOOFER |
5.25” (13.3cm) IMG woofer |
|
|
CROSSOVER FREQUENCY |
2.9kHz |
|
|
TAP SETTINGS |
1.8watts,3.75watts,7.5watts,15watts,30watts@70V | 3.75watts,7.5watts,15watts,30watts@100V |
|
|
ENCLOSURE TYPE |
Bass-reflex via dual front-firing ports |
|
|
ENCLOSURE MATERIAL |
ABS plastic |
|
|
DIMENSIONS |
8.13” (20.64cm) H x 12.0” (30.48cm) W x 8.875” (22.5cm) D |
|
|
WEIGHT |
9 lbs. (4.1kg) |
|
|
FINISHES |
Black/White enclosure and grille |
|
|
WIRE GAUGE ACCOMODATED |
14 AWG |
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 11 lbs
PART NUMBER
097147000001 (Black)
097089000001 (White)
NOTES:
•1” titanium driver mated to a 90º X 90º Tractrix® Horn
•Built-in 60-Watt, 70V/100V high quality multi-tap transformer with 8-ohm bypass
•Paintable UV-resistant ABS enclosure with rustproof aluminum grille
•Supplied with C-style mounting bracket and stainless steel hardware
* 8 ohm bypass
1 3M, Half-space anechoic
2 AES standard, continuous pink noise, 6dB peaks
3 Calculated at 1M half-space at power handling power input 4 SPL at 1M, half-space anechoic with 2.83 volts input
CA-650-T |
FULL-RANGE 6.5” 2-WAY |
|
|
FREQUENCY RESPONSE1 (+/- 4 dB) |
69 Hz - 20 kHz |
POWER HANDLING2 |
85 watts (19V)* | 300 watts peak |
MAXIMUM SPL3 |
111 dB | 117 dB peak |
SENSITIVITY4 |
95 dB |
NOMINAL IMPEDANCE |
8 ohm* |
|
|
TWEETER |
1” (2.54cm) titanium diaphragm compression driver |
|
|
HIGH FREQUENCY HORN |
90˚ x 90˚ Tractrix® Horn |
WOOFER |
6.5” (16.5cm) IMG woofer |
|
|
CROSSOVER FREQUENCY |
1.9kHz |
|
|
TAP SETTINGS |
3.75watts,7.5watts,15watts,30watts,60watts@70V | 7.5watts,15watts,30watts,60watts@100V |
|
|
ENCLOSURE TYPE |
Bass-reflex via dual front-firing ports |
|
|
ENCLOSURE MATERIAL |
ABS plastic |
|
|
DIMENSIONS |
9.5” (24.13cm) H x 15.2” (38.6cm) W x 10.9” (27.6cm) D |
|
|
WEIGHT |
13 lbs. (5.9kg) |
|
|
FINISHES |
Black/White enclosure and grille |
|
|
WIRE GAUGE ACCOMODATED |
14 AWG |
12 |
FOR THE LATEST SPECIFICATIONS VISIT KLIPSCH.COM/PRO |
|
|
SHIPPING QUANTITY: Single
SHIPPING WEIGHT: 15.6 lbs
PART NUMBER
097148000001 (Black)
097092000001 (White)
NOTES: