Klipsch CP-6T Specification Sheet

CP-6T
COMPACT, HIGH PERFORMANCE INDOOR/OUTDOOR 70/100 VOLT LOUDSPEAKER
The Klipsch Compact Performance CP-6T cabinet speaker, with its weather-resistant design combined with its small stature, is the perfect 70/100 Volt distributed audio solution for retail, hospitality, restaurants and bars, whether operation is indoors or out. The proprietary Tractrix® Horn assures a highly efficient design that reproduces sound with unmatched low-distortion clarity and detail at both foreground and background volume levels. The conical-shaped, long-throw woofer is designed for minimal cone breakup for more accurate low frequency response and is reinforced with dual, front-firing ports in a bass-reflex design for maximum bass output wherever the speaker is located. The 90° x 90° horn dispersion assures wide, even coverage pattern in either a horizontal or vertical position. Traditional Klipsch efficiency provides maximum output with minimum wattage.
FAST, EASY INSTALLATION WITH A REFINED LOOK
The CP-6T makes a highly aesthetic statement, designed to have an appealing look from all angles with its integrated bracket and its ability to be tightly mounted into a wall-to-wall or wall-to­ceiling corner due to its V-shaped rear profile. The front bracket attachment combined with front baffle speaker terminals assures a safe, easy, one-screwdriver installation. Tool-free 15° increment angle adjustment makes positioning a breeze. Tap settings are also conveniently front-baffle placed for quick access. If needed, the CP-6T is provided with dual 1/4”, 20 thread, rear-positioned inserts for utilization of a third party bracket and/or a safety cable attachment. The CP-6T is offered in a paintable Black or White cabinet with matching grille.
O U T P U T T H AT OUTPA C E S I T S D I M I N U T I V E S I Z E
With high sensitivity combined with multiple tap settings, the CP-6T is the perfect choice for numerous commercial applications of varying sizes. Its 8 ohm bypass allows quick adaptability for venues that specify separate 70/100 Volt and low impedance zones in the same system. Available in a paintable Black or White cabinet.
© 2014 Klipsch Group, Inc.
SPECIFICATIONS
2
30 watt Tap
15 watt Tap
7v Tap
3.75 watt Tap
4
1
3
83Hz-22kHz +/- 3dB
75 w (300 peak) (8 ohm bypass)
111 dB (8 ohm bypass)
105 dB 70 V/108 dB 100V
102 dB 70 V/105 dB 100V
99 dB 70 V/102 dB 100V
96 dB 70V/99 dB 100V
94 dB
paintable, weather resistant
Mounting Template, Bracket Retaining Screws (x4),
Safety Instructions, Grille Removal Tool
FREQUENCY RESPONSE
POWER HANDLING
MAX CONTINUOUS OUTPUT
SENSITIVITY
NOMINAL IMPEDANCE 8 ohm (8 ohm bypass)
TWEETER .75" (1.9cm) aluminum dome tweeter
HIGH FREQUENCY HORN 90° x 90° Tractrix® Horn
WOOFER 5.25" (13.3cm) long-throw IMG woofer
CROSSOVER FREQUENCY 3kHz 12dB octave
ENCLOSURE TYPE Bass-reflex via dual front-firing ports
ENCLOSURE MATERIAL Anti-resonant, mineral-filled PPC;
GRILLE Powder-coated aluminum w/rotatable logo
TERMINALS Front baffle mounted accessed via rear pull-through
SPEAKER WEIGHT 6.85 lbs (3.1 kg)
SPEAKER DIMENSIONS 11.0"(27.9cm) H x 7.0"(17.8cm) W x 6.1"(15.5cm) D
SPEAKER DIMENSIONS W/ WALL MOUNT 11.0"(27.9cm) H x 7.0"(17.8cm) W x 6.9"(17.5cm) D
OTHER MOUNTING OPTIONS 1/4", 20-thread inserts on cabinet rear
FINISHES White/Black enclosure and grille
WIRE GAUGE ACCOMMODATED up to 16AWG
SOLD AS Speaker pairs
INCLUDED IN CARTON Speakers (x2), Grilles (x2), Brackets (x2), Manual,
CARTON DIMENSIONS 15"(380mm) H x 19.5"(496mm) W x 10.6"(268mm) D
TOTAL CARTON WEIGHT 17.19 lbs.(7.8kg)
ITEM NUMBER 1060388 (white), 1016298 (black)
UPC 743878027044 (white), 743878025996 (black)
BUILT FROM 2014
1
3M anechoic
2
IEC 268-5 filtered pink noise with 6dB crest factor
3
Calculated at 1M at power handling power input
4
SPL at 1M, anechoic with 2.83V input
A wholly-owned subsidiary of VOXX International Corporation
klipsch.com/pro
CP-6T
+3 dB SPL and
ADDED BASS
<=30 FT
(9M)
+3 dB SPL and
ADDED BASS
12 FT
(3.7M)
+3 dB SPL and
ADDED BASS
+3 dB SPL and
ADDED BASS
+3 dB SPL and
ADDED BASS
_
7.5 Watts
+
7.5 Watts
7.5 Watts
7.5 Watts
_
+
_
+
_
+
_
+
_
+
_
+
_
+
_
+
7.5 Watts 7.5 Watts
7.5 Watts
7.5 Watts
Parallel Wiring
70/100 Volt
Line Distribution Amp
7.0 ”
(17.8cm)
7.0 ”
(17.8cm)
TOOLS NEEDED FOR CP-6T WALL-MOUNT INSTALLATION:
a) Level b) One pencil
11.0”
(27.9cm)
9.4”
(23.9cm)
c) 1 Philips #2 screwdriver OR One Power Drill with A LOW TORQUE SETTING and a
Philips #2 screwdriver bit
d) Four #10 or #12, 2.5-3” (4-5cm) Pan head Screws (Two for each speaker bracket) for mounting
into wall stud OR Four minimum 10 lb. (5kg) Wall Anchors if stud-mounting is unavailable
6.1”
(15.5cm)
TIPS ON DESIGNING/INSTALLING A 70/100 VOLT AUDIO DISTRIBUTION SYSTEM WITH KLIPSCH CP-6T SPEAKERS:
Using a quality SPL meter, first determine the ambient noise level of the business you are designing a system for. Then determine the area(s) the customer wants to cover and if they desire a Background or Foreground music system for their particular business.
Ambient Noise Levels: Measure at peak business hours to determine highest level Background Music Levels: Usually 3-6 decibels (dB’s) above the ambient noise level in an area Foreground Music levels: 10+ dB’s above the ambient noise level (used in high-energy environments)
When determining speaker heights to mount over a given area, note the Inverse Square Law for sound and the fact that when placing a speaker in a corner 3 dB additional output (+3dB) is obtained. In an area people are seated calculate coverage to 3.5 ft (1m) from floor, in an area people stand 5 ft. (1.5m) from floor
INVERSE SQUARE LAW
For every doubling of distance from a speaker
Sound Pressure Level (SPL) is
reduced by 6dB (-6dB)
X
Y
SPEAKER IN WALL/CEILING OR WALL/WALL
EXAMPLE: Speaker in Corner (+3dB)
CP-4T Sensitivity: 94 dB@1 watt, 1 meter TAP: 3.75 watts X (1m) = 103 dB
12 FT
(3.7M)
Y (2m) = 97 dB Z (4m) = 91 dB
EXAMPLE: Speaker on Wall
CP-4T Sensitivity: 94 dB@1 watt, 1 meter TAP: 3.75 watts X (1m) = 100 dB Y (2m) = 94 dB Z (4m) = 88 dB
Space speakers on wall all at the same height aimed down toward listening area. Space according to coverage pattern (90°). Stagger opposing speakers if within 30 ft. (9m) on opposite wall. Closer spacing produces most even coverage. Avoid obstacles in front of speakers For more reverberant rooms mount speakers lower at 8-12 ft. (2.4-3.7m) from floor.
Z
Choose a 70/100 Volt Line Distribution Amplifier based on total wattage needed to power amount of speakers at selected tap settings PLUS, we recommend, 50% additional power to cover additional dynamic headroom/future expansion. Wire all speakers in parallel.
<=30 FT
(9M)
Example: Eight CP-6T speakers tapped at 7.5 watts each = 8 x 7.5 = 60 watts + additional 50% wattage = 90 watt amplifier
Loading...