Klipsch CP-6 User Manual
CP-6
COMPACT, HIGH PERFORMANCE
INDOOR/OUTDOOR LOUDSPEAKER
The Klipsch Compact Performance CP-6 mountable cabinet speaker,
with its weather-resistant design, is as much at home on the patio as
it is placed on a shelf or mounted on the wall indoors. The proprietary
90° x 90° Tractrix® Horn provides for unmatched low-distortion clarity
and detail while the long-throw woofer combines with front-firing
ports for amazingly powerful low frequency response wherever they
are located. Traditional Klipsch efficiency provides maximum output
with minimum wattage.
QUICK, EASY INSTALLATION
The CP-6 makes a highly aesthetic statement with its smaller size
and ability to mount closer to a wall or even be tucked into a
corner with its V-shaped rear profile. Tool-free angle adjustment
makes positioning a breeze. The unique, solid mounting bracket
assures a fast, easy, one-screwdriver installation. Front speaker wire
terminals combined with a pull-through wire channel provide a quick
connection with an uncluttered look. The CP-6 will also look great
placed on a shelf or stand without using the supplied bracket.
MULTIPURPOSE DESIGN
The Klipsch CP-6 can function as stereo mains or surrounds or be
mounted outdoors for warmer weather enjoyment with its solid,
mineral-filled cabinet and stainless steel hardware. Sold in pairs and
offered in Black or White with the ability to custom paint, the CP-6
complements any indoor or outdoor décor.
SPECIFICATIONS CP-6
Frequency Response
Power Handling
Maximum Continuous Output3111dB
Sensitivity
Nominal Impendance 8 ohms
Tweeter .75" (1.9cm) aluminum dome tweeter
High Frequency Horn 90° x 90° Tractrix® Horn
Woofer
Crossover Frequency 3kHz 12dB octave
Enclosure Type Bass-reflex via dual front-firing ports
Enclosure Material
Grille
Terminals Front baffle mounted accessed via rear pull-through
Speaker Weight 5.8 lbs. (2.6kg)
Speaker Dimensions 11.0"(27.9cm) H x 7.0"(17.8cm) W x 6.1"(15.5cm) D
Speaker Dimension
w/ Wall Mount
Other Mounting Options 1/4", 20-thread insert on cabinet rear
Finishes
Wire Gauge Accommodated up to 16AWG
Sold As Speaker pairs
1
2
4
70Hz-22kHz +3/-6 dB
75 w (300 peak)
94 dB @ 1 watt/1 meter
5.25" (13.3cm) long-throw IMG woofer
Anti-resonant, mineral-filled PPC;
paintable, weather resistant
Powder-coated aluminum w/rotatable logo
11.0"(27.9cm) H x 7.0"(17.8cm) W x 6.9"(17.5cm) D
White/Black enclosure and grille
3502 Woodview Trace Indianapolis, IN 46268 | klipsch.com
All specifications are subject to change without notice.
©2014 K lipsch Group , Inc. Klipsc h is a wholly-ow ned subsidia ry of VOXX Inter tnational C orporatio n
Included in Carton
Carton Dimensions 15"(380mm) H x 19.5"(496mm) W x 10.6"(268mm) D
Total Carton Weight 15.21 lbs.(6.9kg)
Item Number 1060387 (white), 1016297 (black)
UPC 743878027037 (white), 743878025989 (black)
Built From 2014
1 3M anechoic
2 IEC 268-5 filtered pink noise with 6dB crest factor
3 Calculated at 1M at power handling power input
4 SPL at 1M, anechoic with 2.83V input
Speakers (x2), Grilles (x2), Brackets (x2), Manual,
Mounting Template, Bracket Retaining Screws (x4),
Safety Instructions, Grille Removal Tool
+
-
+
-
+
-
+
-
+
-
+
-
ONE PAIR TO
8Ω CAPABLE
AMP/RECEIVER
Right Channel Left Channel
+
-
+
-
+
-
+
-
PARALLEL WIRING TWO PAIRS TO
4Ω CAPABLE AMP/RECEIVER
Right Channels Left Channels
R
+
L
+
_
_
R
+
L
+
_
_
SPK A SPK B
Amp/Receiver Rear Amp/Receiver Front
SPK A SPK B
+
-
+
+
-
+
-
X
X
X
7.0 ”
(17.8cm)
6.9”
(17.5cm)
TOOLS NEEDED FOR CP-6 INSTALLATION:
a) Level
11.0”
(27.9cm)
9.4”
(23.9cm)
b) One pencil
c) 1 Philips #2 screwdriver OR One Power Drill with A LOW TORQUE SETTING and a Philips #2
screwdriver bit
d) IF WALL MOUNTING: Four #10 or #12, 2.5-3” (4-5cm) Pan head Screws (Two for each speaker
bracket) for mounting into wall stud OR Four minimum 10 lb. (5kg) Wall Anchors if studmounting is unavailable
6.1”
(15.5cm)
SUGGESTIONS ON CONNECTING TWO PAIRS OF CP-6’S TO ONE AMPLIFIER/RECEIVER:
Klipsch CP-6 speakers are rated at 8 Ohms Nominal Impedance. If connection of TWO PAIRS to one amplifier or receiver is desired, the following connection
methods are recommended:
+
L
_
Amp/Receiver Front
SPK A SPK B
+
-
+
-
Amp/Receiver Rear
SPK A SPK B
+
+
R
_
_
+
-
Right Channels Left Channels
+
-
Right Channels Left Channels
+
-
+
-
+
L
_
PARALLEL WIRING TWO PAIRS TO
4Ω CAPABLE AMP/RECEIVER
-
SERIES WIRING TWO PAIRS TO
16Ω CAPABLE AMP/RECEIVER
-
R
+
+
SUGGESTIONS ON PLACEMENT OF KLIPSCH CP-6 SPEAKERS:
If your amp/receiver has separate connections for two
speaker pairs, connect the two pairs of CP-6’s to the two
speaker terminal sets. Depending on your amp/receiver,
either both pairs, or just one pair, will play at the same time.
If your amp/receiver does not have separate connections
for two speaker pairs, connect CP-6’s to the single set of
speaker terminals in parallel as shown. Your amp/receiver
+
-
+
-
must be rated to 4 Ohms to make this connection.
If your amp/receiver cannot drive a two-pair, 4 Ohm load
above, connect both pairs of CP-6’s to the single set of
speaker terminals in series as shown. This will lower the
+
-
+
-
volume sent to all speakers.
X
STEREO ROOM PLACEMENT EXAMPLE
(aim speakers to main listening area)
X
Mount Speakers horizontal
under roof eaves and point
down towards deck
X
AS SURROUND SPEAKERS ROOM PLACEMENT EXAMPLE
House
Speakers disperse sound 90º
to cover whole deck evenly
OUTDOORS TO COVER A DECK/PATIO WITH SOUND
(aim speakers down to main listening area)
Loading...