Klipsch Cornwall Brochure

Three-Way Horn-Loaded Loudspeaker
Cornwall III
Initially introduced in 1959, the Cornwall speaker was designed to serve as a larger, full-range alternative to the Heresy when used as a center channel speaker between two widely spaced Klipschorns. When it was discontinued in 1990, there was an outcry from consumers resulting in a letter-writing campaign and even a petition to bring back this storied loudspeaker.
This famed speaker, now dubbed the Cornwall III, is back and better than ever. A three-way design using horn-loaded compression drivers for the midrange and treble and a direct-radiating 15-inch woofer for the low frequencies, the Cornwall delivers the full-range bass response of the Klipschorn®with sensitivity and output approaching the fully horn-loaded models.
SPECIFICATIONS
FREQUENCY RESPONSE 34Hz-20kHz ± 3dB
SENSITIVITY 102dB @ 1 Watt/1 meter
POWER HANDLING 100 Watts max continuous (400W peak)
MAXIMUM SPL 119dB
NOMINAL IMPEDANCE 8 ohms
ENCLOSURE TYPE Bass reflex via front-mounted slot ports CROSSOVER FREQUENCY HF: 5000Hz
MF: 800Hz
TWEETER K-107-TI 1" (2.54cm) Titanium diaphragm
compression driver
HIGH FREQUENCY HORN Tractrix MIDRANGE K-53-TI 1.75" (4.45cm) Titanium diaphragm
MID-FREQUENCY HORN Exponential
WOOFER K-33-K 15" (38.1cm) Fiber-composite cone DIMENSIONS 35.75" (90.81cm) H x 25.313" (64.29cm) W
®
compression driver
x 15.5" (39.37cm) D
WEIGHT 98 lbs. (44.5kg)
ENCLOSURE MATERIAL MDF
FINISHES Walnut Lacquer, Cherry Lacquer, Black Lacquer
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2006
Loading...