Klipsch CMS-4.1 Brochure

Commercial Music System
CMS–4.1
This system proves that compact dimensions and sophisticated style can coexist with high­performance sound. It is an excellent choice for 70V/100V distributed-line systems in applications that require unobtrusive, easy-to­install, high-quality loudspeakers.
Because of its individually sold components that include a low-profile satellite, durable mounting kit, two subwoofer selections and a flexible outboard network, this system can easily be configured to deliver just the right amount of sound to any size installation.
Available in black or white, the satellite is a marvel of miniature technology that maximizes output and dynamics. Klipsch’s exclusive MicroTractrix™ Horn, the working element of this 7.5-inch tall loudspeaker, is formed right into the cabinet baffle, a design that offers the lowest diffraction and maximum release of energy into the listening areas. The ported, bass-reflex enclosure maximizes bass response for a dynamic sound.
Also available in black or white, the Comm Sat mounting kit features a metal wall plate and arm that offers both tilt and swivel features. Once properly positioned, the pivoting tip can easily be locked into place with the provided adjustment tool. To enhance the cosmetics of the finished installation, the satellite’s color­matched wire can be concealed in the mount arm.
As one of the subwoofer options, the compact, easy-to-install surface mount CA-SW-8T is an all-purpose, indoor/outdoor passive model with an internal multi-tap transformer. This product delivers deep, driving sound through an 8-inch, long excursion driver that has a high-temperature voice coil attached to an IMG (injection­molded graphite) cone that combines light weight, excellent rigidity, and water resistance. For easy wall or ceiling mounting, the CA-SW­8T comes with a C-bracket assembly that attaches to threaded studs in the cabinet with oversized knobs, ensuring positive lock.
Continued on page 2
SPECIFICATIONS
COMM SAT NETWORK
BANDWIDTH TRANSFORMER TA P S 70V: 30 Watt, 100V: 60 Watt
OSSOVER 100Hz 12dB/Octave Highpass
CR INPUT CONNECTORS Barrier Strip ENCLOSURE MATERIAL Steel HEIGHT 4.375" (11.1cm) WIDTH 6.125" (15.6cm) DEPTH 6.125" (15.6cm) WEIGHT 5 lbs. (2.3kg) FINISH Gray
1
N/A
COMM SAT SPEAKER
BANDWIDTH POWER HANDLING MAXIMUM CONTINUOUS SPL SENSITIVITY TRANSFORMER TA P S N/A (Comm Sat network required) NOMINAL IMPEDANCE 8 ohms(3.2 ohm minimum @ 5.5Hz) HIGH FREQUENCY CROSSOVER 4900Hz DRIVE
SYSTEM CROSSOV E R Comm Sat network required INPUT CONNECTORS Pig tail wire attached
OSURE T
CL
EN ENCLOSURE MAT E R I A L Stone Mineral Compound HEIGHT 7.5" (19.1cm)
TH 4.25" (10.8cm)
WID DEPTH 6.4" (16.2cm) NET WEIGHT 4 lbs. (1.8kg)/ each SHIPPING WEIGHT 8 lbs. (3.6kg)/ pair FINISH MOUNTING Comm Sat mount (optional)
1
1
3M, Half-space anec
2
2
AES Standard, continuous pink noise 50Hz-10kHz, 6dB peaks
3
3
Calculated at 1M half-space at power handling power input
4
4
SPL at 1M, half-space anec
1
2
3
4
OMPONENTS Two-way system using one .75"
C
YPE
hoic
h 2.83V in
hoic wit
120Hz-20kHz ± 4dB (-10dB @ 42Hz) 70W (15.5V @ 3.2 ohm input) 107dB 92dB @ 2.83 volts/1meter
(1.9cm) magnetically shielded, polymer dome compression driver tweeter with a 90˚x 40˚ Tractrix
n and one 3.5" (8.9cm)
Hor magnetically shielded, poly cone woofer
lex via rear-mounted port
ef
Bass r
e
put
Blac
k or Whit
®
1
Commercial Music System
CMS–4.1
Continued from page 1
Also compact and easy-to-install, the IC-8T-SW in-ceiling subwoofer option features a transformer-less design that delivers high­impact, robust bass. This model adds more dimension to any in-ceiling configuration by using an 8-inch woofer and 8-inch drone, both featuring polypropylene cones and high­temperature voice coils in the woofer. While most subwoofers use a port to increase output, the IC-8T-SW employs a bandpass design that utilizes a passive radiator. This eliminates a lot of the distortion and minimizes turbulence that is often present in ported designs. The IC-8T-SW is shipped complete with a tilebridge for installation in a suspended ceiling or wherever additional reinforcement of the ceiling material is required.
Specifically designed for this system, the Comm Sat Network is an outboard unit that features 70V/100V tap-settings and serves as a hub for up to four satellites and the chosen subwoofer. It is housed in an integral UL­approved metal box.
SUBWOOFER OPTIONS
CA- SW- 8 T
BANDWIDTH POWER HANDLING MAX CONTINUOUS OUTPUT SENSITIVITY TRANSFORMER TA P S 70V: 60W, 30W, 15W, 7.5W
NOMIN A L I M P E DANCE 6 ohms nominal (4 Minimum @ 92Hz) LOW F R E Q U E N C Y C R O S S O V E R 12dB/Octave low-pass, 150Hz DRIVE COMPONENTS One 8" IMG cone woofer INPUT CONNECTORS 5-way binding posts ENCLOSURE T Y P E Bass reflex via front mounted port ENCLOSURE MAT E R I A L All-weather ABS Plastic HEIGHT 11.125" (28.3cm) WIDTH 16.375" (41.5cm) DEPTH 11.75" (29.9cm) NET WEIGHT 19 lbs. (8.6kg) SHIPPING WEIGHT 22.1 lbs. (10kg) FINISH Black or White MOUNTING C-Bracket (included); CA Safety Kit (optional)
1
2
3
4
51-135Hz ± 4dB (-10dB 42Hz) 150W (25V @ 6 ohm input) 111 d B 92dB @ 2.83 volts/1 meter
100V: 60W, 30W, 15W Thru Position: 6 ohms
www.klipsch.com 1-800-KLIPSCH
All specifications are subject to change without notice. ©2004
IC- 8 T - SW
BANDWIDTH
WER
PO MAX CONTINUOUS OUTPUTS SENSITIVITY SWITCH TA P S 4 ohm Mono position
TRANSF NOMIN A L I M P E DANCE 6 ohms (4.85 minimum @145Hz) LOW FREQUENCY CROSSOVER N/A DRIVE
INPUT CONNECTORS 4 point terminal strip ENCLOSURE T Y P E Bandpass enclosure (drone loaded)
CLOSURE MAT E R I A L Baffle: ABS Plastic, Can: Formed Steel
EN HEIGHT 13.625" (34.6cm) DIAMETER 14.125" (35.9cm); 12.5" (cutout diameter) NET WEIGHT 23 lbs. (10.4 kg) SHIPPING WEIGHT 30 lbs. (13.6kg) MOUNTIN FINISH White MOUNTING Tilebridge (included)
1
1
3M, Half-space anec
2
2
andar
t
AES S
3
3
Calculated at 1M half-space at power handling power input
4
4
SPL at 1M, half-space anechoic with 2.83V input
1
hoic
2
3
0kHz, 6dB peak
HANDLING
4
ORMER
OMPONENTS One 8” woofer and one 8” drone,
C
G DEPTH
d, continuous pink noise 50Hz-1
53-129Hz ± 4dB (-10dB 44Hz)
7V @ 6 ohm input)
50W (2
1 111 d B 92dB @ 2.83 volts/1 meter
Thru Position: 4 ohm Mono or 8 ohm Stereo
osition- 60W/120W
00V P
70/1
Polypropylene cone
.25" (29.9cm)
1
1
s
2
Loading...