Klipsch Cinema 6 User Manual

5.1 Home Theater Speaker System

CINEMA 6

It’s no secret that the compact, stylish and versatile Reference Series Satellites are a big hit. Since their arrival, the Cinema 8 and Cinema 10 home theater systems have been flying off of store shelves. In order to build on their success, Klipsch has taken things a step further with the even smaller and more affordable Cinema 6 setup.

Made up of four RSX-3s, an RCX-3 and an RW-8 powered subwoofer, the Cinema 6 applies the same technology and design principles as its larger counterparts so that it can deliver the unique Klipsch sound that make these life-style oriented systems bestsellers. Available in a black or silver finish, the RSX-3 and RCX-3 are both two-way, magnetically shielded speakers that employ 3.5-inch aluminum woofers and

0.75-inch titanium-dome compression drivers coupled to Klipsch’s new round MicroTractrix™ Horns for maximum clarity and efficiency. These loudspeakers also feature high-quality network components and top-ofthe-line internal wiring.

The woofers are long-throw units driven by powerful ceramic magnetic motor structures. The Cerametallic™ cones are lightweight with excellent rigidity, which dramatically reduces any resonance. As a result, the RSX-3 and RCX-3 are capable of robust bass extending low enough for comfortable operation with today built-in A/V preamp/processor and receiver crossovers.

’s

deliver clean, room-rattling bass to below 30Hz. The driving force behind this performance breakthrough is Klipsch’s exclusive Corner Port™ Technology. This technology allows the port tube to be as long as possible without bending, which minimizes turbulence that can cause port noise and distortion. It also allows the enclosure to be tuned to a lower frequency than would otherwise be possible to create deeper bass from a smaller cabinet. Another important element is a cornershaped flange at the port’s internal opening, which amplifies the benefits of the longer port.

Please refer to RSX-3, RCX-3 & RW-8 cut sheets for indvidual specifications.

■

MicroTractrix Horn tweeter for clean, detailed highs

■

Ball-joint pedestal stand with keyholes allows easy placement

■

Front-mounted Cerametallic cone driver with front-firing Corner Port

■

Auto power feature turns subwoofer on and off automatically

Both models have integrated pedestal stands with ball joints that allow them to be adjusted in almost any direction by using the provided allen wrench. K are provided on the underside of the stand base for nohassle wall mounting. Grilles magnetically snap into place over the front baffles, while sturdy five-way binding posts ensure secure connection to any type of cable.

vailable in a black wood grain vinyl finish, the RW

A employs an 8-inch Cerametallic™cone. As the smallest subwoofer in the Reference Series line, the RW-8 can

eyholes

-8

www.klipsch.com

1-800-KLIPSCH