Klipsch Car Speaker User Manual

SYNERGY SERIES
S
C
FLAT
PANEL
TV
Optional
sub
L
R
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other.A grounding type plug has two blades and a third grounding prong.The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket,or table specified by the manufacturer, or sold
with the apparatus.When a cart is used,use caution when moving the cart/appara tus combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,or has been dropped.
GRILLE
The speaker can be used with or without its grille in place.The g rille attaches magnetically; you can remove the grille easily by pulling it forward and replace it simply by lining up its edges with the those of the speaker cabinet.
The logo badge on the grille can be removed, rotated 90 degrees and replaced for proper ori­entation when using the SLX in a horizontal position.To remove the logo badge, simply push the two pins on the rear of the logo badge together and push it out of its location on the grille. To reinsert it,align the two pins with the hole in the grille and push the logo badge into place (making sure the orientation of the logo badge is correct).
PLACEMENT
Your Synergy SLX speakers are designed for maximum flexibility and will perform well in a wide variety of configurations. Figure 1 shows a typical home theater setup, with a center­channel speaker (Synergy SLX) mounted below (or above) a flat panel tv,left and right front speakers (Synergy SLX) flanking the screen, and another pair of speakers (Synergy SLX) to the sides of the listening area for the main surrounds. Below are specific placement recommenda­tions for each function.
ENGLISH
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
WARNING:To reduce the risk of fire or electrical shock,do not expose this apparatus to rain or moisture.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:Voltages in this equipment are hazardous to life.No user-serviceable parts inside. Refer all ser
vicing to qualified ser
vice personnel.
CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’
s authority to opera
te this device.
ABOUT YOUR KLIPSCH PURCHASE
Thank you f system, research and development. T product tha distortion, detail and dynamics, included you. music and movies f
or your purchase of Klipsch speakers.
you will hear the result of over 55 years of stringent engineering and class-leading
y—the guiding design f
echnolog
Like all Klipsch products,
or the first Klipschorn
t has followed. Horn-loading allows your speakers to deliver high sensitivity,low
t frequency response and wide dispersion,
la
f
the hallmarks of
“The Klipsch Sound.”
Warranty card or register online at www.klipsch.com so we are better able to serve
Again,
thank you f
or choosing Klipsch and we hope tha
y years.
or man
After reading this manual and connecting your
your speakers fea
®
developed in 1946 and f
which transla
ture Klipsch Horn-loaded
or ever
tes to unequaled power
Please be sure to fill out the
t your speakers bring life to your
y
,
Figure 1
Center-Channel Speaker:Center the speaker directly above or below your tv and mount it on the wall (see wall mounting instructions).When using the supplied mounting bracket, each Synergy SLX can be rotated 30° (15° in each direction) to obtain optimal directivity toward the listening area.
Front Left and Right Speak
ers:
The front left and right speakers should be a
pproxima
tel
y in
line with your tv and equidistant from it.The distance from the tv is not critical, though wide
ving either speaker closer than
void ha
tion will tend to make the sound more spacious.
separa
ted ear height if tha
2 feet to a side wall.
Place them a
t sea
A
t is practical.When using the supplied mounting bracket, each Synergy SLX can be rotated 30° (15° in each direction) to obtain optimal directivity toward the listening area.
Left and Right Surround Speakers: Using Synergy SLX’s as surround speakers ensures an
or
acoustic and cosmetic ma
tch to the front left,
right and center speakers.
speakers employed as surround speakers is on or a
The best loca
gainst the walls to the sides of the sea
tion f
ting
area, anywhere from adjacent to the listening position to about 20º behind it. Mount them
bove the ear height of sea
a the ceiling.
Aim them straight across the room or back slightl
ted listeners (5’-7’ high) but a
void placing them up a
y toward the rear wall f
gainst or on
or a more
diffuse sound or toward the listening position for a more direct sound.The design of the
t
y SLX allows g
Synerg depart significantl
lexibility and good results can be achieved with configura
t f
rea
y from the ideal.
When using the supplied mounting bracket, each Synergy
tions tha
SLX can be rotated 30° (15° in each direction).
Surround Bac
k Speak
ers:
If your electronics support Dolb
ital EX,THX Surround EX, or
y Dig
DTS-ES 7.1 or 6.1-channel surround, you can place one or two speakers behind the seating
ve as surround back speakers.
area to ser
bove seated ear level. If you are using just one back surround speaker,it should be
tion is a
loca
As with the left and right surrounds,
the optimum
centered behind the listening area; if you are using two, they should be spaced fairly close
With this type of system,
.
together adjacent to the sea
the regular left and right surrounds should be loca
ting area rather than behind it.
ted
Loading...
+ 2 hidden pages