ALL-PURPOSE 8"
TWO-WAY COMPACT
LOUDSPEAKER
SYSTEM
The Klipsch CA-8T compact full range
system is perfect for higher power pro-
fessional applications where flexible
mounting and extended range are
re q u i red, including everything needed
for fast and easy distributed sound
installations. Equally at home indoors
or out, in for e g round or backgr o u n d ,
higher S P Lapplications, the CA-8T’s
appearance and Klipsch fidelity fit into
residential, business or r e c re a t i o n a l
e n v i ronments equally well.
The UV- and weather- resistant A B S
e n c l o s u re includes an internal multi-
tap transformer with switchable dir e c t
8 ohm bypass, simplifying hookup to
any type of sound system. The C-
bracket assembly attaches to the enclo-
s u re’s integral stainless steel thre a d e d
studs with oversized knobs, ensuring
a positive position-lock and rapid "no-
pain" installation. External attachment
to the built-in security retainer pro-
vides an extra measure of safety,
p rotecting against unexpected
damage or r e m o v a l .
The CA-8T includes a high power 8"
extended range low-frequency driver
and a 1" titanium diaphragm compr e ssion driver on a molded Tractrix Horn.
The 90º x 60º horn and driver assem-
bly allows repositioning by 90º for
selectable pattern contro l .
The compact dual port bass re f l e x
loudspeaker system can handle 100
watts continuous power for an A E S
sensitivity of 96dB and a maximum
output of 113dB S P L.
Paintable and available in black or
white finishes, the ABS enclosure
f e a t u res corrosion- and ru s t - re s i s t a n t
stainless steel har d w a re and a re m o v-
able aluminum powder-coated grille,
ensuring maintenance-free service in
any environment or application.
Whether indoors or out, the Klipsch
CA-8T is the good looking, gre a t
sounding full-range solution for
installed high-fidelity sound.
C A - 8 T
●
Compact UV and weather - resistant ABS enclosure
●
Adjustable pattern 90º x 60º Tr a c t r i x® H o r n
●
Internal 60W multi-tap transformer with direct 8 ohm bypass
●
Continuous high power handling of 100 watts
●
White or black enclosure paintable to match decor
●
96dB sensitivity, 113dB maximum output (1 meter)
●
11.125" x 16.375" x 11.75" and 17 lbs.
S p e c i f i c a t i o n s
HEIGHT
W I D T H
D E P T H
W E I G H T
1
64Hz -19kHz±4dB
2
100 W (21V)
3
11 3 d B
4
9 6 d B
7 0 V: 60W, 30W, 15W
1 0 0 V: 60W, 30W
T h ru Position: 8 ohms
60º±40 2500Hz-20kHz
80º±40 1300Hz-20kHz
8±2dB 1300Hz-20kHz
8 ohms nominal (4.2 min @ 175 Hz)
2 k H z
One K-111 1 - A8" low frequency driver
One K-11 8 - A1" titanium diaphragm compression driver
5-way binding posts
All-weather ABS plastic
11.125" (28.26cm)
16.375" (41.59cm)
11.75" (29.85cm)
17 lbs. (7.72kg)
44 lbs. (19.98kg)
White or Black
C-Bracket (included), CASecurity Kit
1
3M, Half-space anechoic
2
AES Standard, continuous pink noise 50Hz-10kHz, 6dB peaks
3
Calculated at 1M at power handling power input
4
SPLat 1M, half-space anechoic with 2.83V input
F R E Q U E N C YRESPONSE
POWER HANDLING
MAXIMUM CONTINUOUS OUTPUT
S E N S I T I V I T Y(2.83 V/1M)
TRANSFORMER T A P S
H O R I Z O N TA LC O V E R A G E
V E RT I C A LC O V E R A G E
D I R E C T I V I T Y
N O M I N A LI M P E D A N C E
CROSSOVER FREQUENCY
C O M P O N E N T S
INPUT CONNECT O R S
ENCLOSURE MAT E R I A L
SHIPPING WEIGHT
F I N I S H E S
A C C E S S O R I E S
CA-8T
COMPACT 8"TWO-WAY SPEAKER SYSTEM
Frequency Response
Impedance
Horizontal Off-Axis Transfer Function
Horizontal Coverage (-6dB) Vertical Coverage (-6dB)
Directivity Index
Vertical Off-Axis Transfer Function UP Vertical Off-Axis Function DOWN
Vertical 1/3 Octave Polars
Horizontal 1/3 Octave Polars
Architectural Specifications
The CA-8T all-purpose two-way compact loudspeaker
system shall include a 8" (20.32cm) K-1111-A weather-
resistant low frequency driver and a 1" (2.54cm) K-118-
A titanium diaphragm high frequency compression
driver mounted on a molded Tractrix Horn. Signal shall
be provided to the transducers via a passive internal
frequency dividing network, with a 2kHz crossover
frequency. The enclosure tuning shall be dual port
bass reflex.
Frequency response shall be 64Hz to 19kHz, ±4dB, with
the -10dB down point at 45Hz, measured at 1 meter,
half space anechoic. The dispersion angle shall be 90º x
60º nominal (refer to graph). Sensitivity shall be 96dB
SPL, measured at 1 meter, half space anechoic, with a
2.83V input. Power handling shall be 100 watts (21V),
to AES standards, continuous pink noise, 50Hz to
10kHz, 6dB peaks. Calculated maximum continuous
output at 1 meter shall be 113dB SPL. Nominal
impedance shall be 8 ohms, with a 4.2 ohm minimum
at 175Hz. Full-range connections shall be made via
5-way binding posts.
A removable powder-coated aluminum grille shall be
provided for protection of the transducers from
tampering or damage. The enclosure shall be of UVand weather-resistant ABS plastic, available in black
or white, with dimensions of 11.125" (28.26cm) high
by 16.375" (41.59cm) wide by 11.75" (29.85cm) deep.
Net weight shall be 17 lbs. (7.72kg). Mounting shall
be via protruding stainless steel threaded studs on
the side enclosure panels, mating to large external
knobs for positive attachment to the C-shaped
mounting bracket (included).
The system shall be a Klipsch CA-8T loudspeaker.
3.486
Back View
1/4-20 UNC Stud
Safety Point
Back View With Out Bracket
Thread Hole
11.125 Ref
6.559
1/4-20 UNC Stud
1/4-20 UNC Stud
Left Side View
3502 Woodview Trace, Suite 200 • Indianapolis, IN 46268
137 County Road 278 • Hope, AR USA71801
1-888-600-5776 • www.klipsch.com
Top View
Front View
Bottom View
1/4-20 UNC Stud
6.559
1/4-20 UNC Stud
Right Side View
©2001 Klipsch Audio Technologies. All rights reserved.
Specifications subject to engineering changes.
1M0901
195064
Loading...