Page 1
8" All-Purpose Passive Subwoofer
CA-800TSW
Put the finishing touches on any great commercial
sound system with the CA-800-TSW all-purpose,
indoor/outdoor subwoofer. This compact and
rugged passive subwoofer with an internal multi-tap
transformer nicely complements the Klipsch CA
Series and other small to medium-sized full-range
speaker installations by adding high-impact, robust
bass.
Building on the success of our popular CA-SW-8T
model, the new CA-800-TSW version features
enhanced cosmetics, added mounting flexibility and
even better performance.
The re-voiced CA-800-TSW shakes things up and
delivers a deep, driving sound through an 8-inch,
long excursion driver that has a high-temperature
voice coil attached to an IMG cone that is light
weight and offers excellent rigidity and water
resistance.
Available in black or white, this model has a durable
UV-resistant all-weather enclosure and internal
multi-tap transformer that allows 70-volt, 100-volt
or pass through 6 ohm operation. It also features a
re-designed grille that stays securely fastened and
incorporates a new paint formulation for increased
weather resistance and years of maintenance-free
protection regardless of the climate or
environment.
The included heavy gauge zinc C-bracket provides
added mounting strength. It attaches to the
enclosure’s integral “center-of-gravity balanced”
threaded studs that are positioned inside the
speaker and to the oversized knobs, ensuring
positive position-lock.
The CA-800-TSW’s improved input cup allows for
easier drainage and the added 3/8”-16 threaded
inserts for use with optional mounts offers better
placement flexibility.
■
Built-in 60-watt, 70V/100V multi-tap transformer with 8-ohm bypass
■
Very high sensitivity and power handling
■
Paintable UV-resistant ABS enclosure with rustproof aluminum grille
■
Supplied with C-style mounting bracket and stainless steel hardware
SPECIFICATIONS
FREQUENCY RESPONSE
POWER HANDLING
MAX CONTINUOUS OUTPUT
SENSITIVITY (2.83V/1M)
HORIZONTAL COVERAGE N/A
VERTICAL COVERAGE N/A
DI N/A
Q N/A
NOMINAL IMPEDANCE 6 ohms (4 ohm min @92Hz)
CROSSOVER 12dB/Octave low-pass, 150Hz
TRANSDUCERS One K-1185-A 8” woofer with IMG cone
ENCLOSURE TUNING Vented System via front firing ports
ENCLOSURE MATERIAL All-weather ABS plastic, paintable
INPUT CONNECTORS 4 point terminal strip
TRANSFORMER TAPS 70V: 60W, 30W, 15W, 7.5W, 3.75W
HEIGHT 11.12" (28.26cm)
WIDTH 16.375" (41.53cm)
DEPTH 12.31" (31.27cm)
WEIGHT 20 lbs. (9.07kg)
1
3M, half space anechoic
2
AES standard, continuous pink noise 50Hz-10Hz, 6dB peaks
3
Calculated at IM at power handling power input
4
SPL at 1M, half-space anechoic with 2.83V input
1
51-135kHz ± 4dB
-10dB 42Hz
2
4
3
150W (25V)
111 d B
92dB
100V: 60W, 30W, 15W, 7.5W, 3.75W
Through Position: 8 ohms
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004
Loading...