Klipsch CA-6-TQXD Brochure
Architectural Specifications
The CA-6T all-purpose two-way compact loudspeaker system
shall include a 6.5" (16.5cm) weather-resistant K-1110-A low
frequency driver and a 1" (2.54cm) K-118-A titanium diaphragm
compression driver mounted on a molded Tractrix Horn. Signal
shall be provided to the transducers via a passive internal
frequency dividing network, with a 2kHz crossover frequency.
The enclosure tuning shall be dual port bass reflex.
Frequency response shall be 69Hz to 20kHz, ±4dB, with the
-10dB down point at 53Hz, measured at 1 meter, half space
anechoic. The dispersion angle shall be 90º x 60º nominal (refer
to graph). Sensitivity shall be 95dB SPL, measured at 1 meter,
half space anechoic, with a 2.83V input. Power handling shall
be 85 watts (19V), to AES standards, continuous pink noise,
50Hz to 10kHz, 6dB peaks. Calculated maximum continuous
output at 1 meter shall be 111dB SPL.
Nominal impedance shall be 8 ohms, with a 4.1 ohm minimum
at 180Hz. Full-range connections shall be made via 5-way
binding posts.
A removable powder-coated aluminum grille shall be provided
for protection of the transducers from tampering or damage.
The enclosure shall be of UV- and weather-resistant ABS plastic,
available in black or white, with dimensions of 9.5" (24.13cm)
high by 15.125" (38.42cm) wide by 10.375" (26.35cm) deep. Net
weight shall be 15 lbs. (6.81kg). Mounting shall be via
protruding stainless steel threaded studs on the side enclosure
panels, mating to large external knobs for positive attachment
to the C-shaped mounting bracket (included).
The system shall be a Klipsch CA-6T loudspeaker.
©2002 Klipsch Audio Technologies. All rights reserved.
Specifications subject to engineering changes.
2M0402
195063 (Rev.1)
Back View
13.19 6
9.086
4.268
1.000
0.500
Safety Point
Back View Without Bracket
1/4-20 UNC
Threaded Hole
7. 532
7.781
15.125 REF
1/4-20 UNC Stud
Left Side View
Top View
Right Side View
1/4-20 UNC Stud
1/4-20
UNC Stud
1/4-20
UNC Stud
Front View
Bottom View
5.915
5.915
7.781
10.375 Ref
6.360
3.000
9.500
3502 Woodview Trace, Suite 200 • Indianapolis, IN 46268
137 County Road 278 • Hope, AR USA 71801
1-888-600-5776 • www.klipsch.com
Designed for high fidelity distributed
sound system installations, the CA-6T
compact full range loudspeaker is
perfect for foreground or background
applications in restaurants, outdoor
recreation environments, boardrooms
or A/V systems. The rugged ABS enclosure is weather-resistant and UVresistant for a long service life. An
internal multi-tap transformer includes
direct bypass switching for distributed
or direct 8 ohm operation.
The included C-bracket and integral
threaded studs with oversized knobs
allow easy undereave, wall or ceiling
mounting for rapid center-of-gravity,
balanced installation. A security
retainer provides for secondary
attachment to an external safety
point, guarding against tampering or
drop damage. Connections are
provided via 5-way binding posts.
The CA-6T components include a high
power 6.5" extended range woofer
and a 1" highly accurate titanium
diaphragm compression driver
mounted on a square-mouth Tractrix
Horn. The 90º x 60º horn/driver assembly
can be repositioned by 90º to provide
flexible horizontal and vertical
pattern adjustments.
Providing great sound for its size, the
compact CA-6T full-range loudspeaker
system is capable of 85 watt continuous power handling, with an AES
rated sensitivity of 95dB and a
maximum output level of 111dB SPL.
The removable powder-coated
aluminum grille and stainless steel hardware offer years of maintenance-free
protection no matter the climate or
environment. The available black or
white enclosure finish can be painted
to match surrounding decor.
Inside and out, the Klipsch CA-6T
provides superior audio performance
in a durable and flexible commercial
package.
CA-6T
.
Multi-tap internal 60W transformer for distributed line systems
.
90º x 60º Tractrix®Horn adjustable for pattern control
.
High 95dB sensitivity, 111dB maximum output at 1 meter
.
Durable stainless hardware and powder-coated aluminum grille
.
Simplified C-bracket attachment for fast field installation
FREQUENCY RESPONSE
1
POWER HANDLING
2
MAX CONTINUOUS OUTPUT
3
SENSITIVITY
4
TRANSFORMER TAPS
HORIZONTAL COVERAGE
VERTICAL COVERAGE
DIRECTIVITY INDEX
NOMINAL IMPEDANCE
CROSSOVER FREQUENCY
COMPONENTS
INPUT CONNECTORS
ENCLOSURE MATERIAL
HEIGHT
WIDTH
DEPTH
WEIGHT
SHIPPING WEIGHT
FINISHES
ACCESSORIES
69Hz-20kHz±4dB
85W (19V)
111dB
95dB
70V: 60W, 30W, 15W, 7.5W
100V: 60W, 30W, 15W
Through Position: 8 ohms
60º ±40 2.3kHz-20kHz
90º ±50 1.3kHz-20kHz
8 ±3dB 800Hz-20kHz
8 ohms nominal (4.1 min @ 180Hz)
2kHz
One K-1110-A 6.5" woofer
One K-118-A 1" titanium diaphragm
compression driver
5-way binding posts
All weather ABS plastic
9.5" (24.13cm)
15.125" (38.42cm)
10.375" (26.35cm)
15 lbs. (6.81kg)
34 lbs. (15.44kg)
White or Black
C-Bracket (included), CA Security Kit
1
3M, Half-space anechoic
2
AES Standard, continuous pink noise 50Hz-10kHz, 6dB peaks
3
Calculated at 1M at power handling power input
4
SPL at 1M, half-space anechoic with 2.83V input
SPECIFICATIONS
All-purpose 6.5"
Two-way Compact
Loudspeaker System
Loading...