Klipsch CA-5-T Brochure
5.25" Two-Way All-Purpose Loudspeaker
CA-5T
■
The CA-5T is a rugged all-weather speaker
that requires only modest amplifier power
to produce high levels of clean, wellbalanced sound. A built-in multi-tap
transformer with 70-volt (3.75 to 30 watts),
100-volt (7.5 to 30 watts), and 8-
ohmbypass settings makes it suitable for all types
of indoor and outdoor distributed-sound
applications, from music to public address.
Compact and lightweight, the CA-5T installs
easily even in cramped quarters, under
eaves or to walls or ceilings, with a supplied
C-style aluminum mounting bracket. The
speaker attaches to the bracket by means of
integral threaded stainless steel studs
located at the cabinet’s center of gravity and
is locked in place with oversize knobs that
ensure secure positioning while facilitating
later adjustment.
Very high sensitivity and power handling
■
Built-in 30-watt, 70V/100V multi-tap transformer with 8-ohm bypass
■
Paintable UV-resistant ABS enclosure with rustproof aluminum grille
■
ositionable Tractrix Horn tweeter for clean, clear highs
P
■
Supplied with C-style mounting bracket and stainless steel hardware
SPECIFICATIONS
BANDWIDTH
POWER HANDLING
MAX CONTINUOUS OUTPUT
SENSITIVITY
TRANSFORMER TAPS 70V: 30W, 15W, 7.5W, 3.75W
HORIZONTAL COVERAGE 60° ± 40 3kHz-20kHz
VERTICAL COVERAGE 80° ± 40 1.6kHz-20kHz
DIRECTIVITY 8 ± 3dB 900Hz-20kHz
1
2
3
4
70Hz-20kHz ± 4dB
75W (17V)
109dB
94dB @ 2.83 volts/1 meter
100V: 30W, 15W, 7.5W
Through Position: 8 ohms
The CA
-5T has a weather-resistant 5.25inch woofer and a 1-inch polymerdiaphragm compression driver tweeter that
combine to produce dynamic, wide-range
sound. The tweeter is mated to a square
90° x 60° Klipsch Tractrix
®
Horn that
increases efficiency and focuses the output
for maximum clarity. The horn can be
repositioned 90° for pattern control.
Available in black or white, the speaker has
a paintable UV
-resistant ABS enclosure with
a removable, powder-coated aluminum
grille for long, trouble-free service. A safety
retainer on the cabinet allows a secondary
attachment point to prevent drop damage.
NOMINAL IMPEDANCE 8 ohms nominal (3.8 min @260Hz)
CROSSOVER FREQUENCY 2700Hz
OMPONENT
C
INPUT C
CLOSURE MATERIAL All-weather ABS plastic
EN
HEIGHT
TH 12" (30.48cm)
WID
DEPTH
NET WEIGHT 10 lbs. (4.54kg)
SHIPPING WEIGHT 24 lbs. (10.89kg) (pair)
FINISH White or Black
MOUNTING C-Bracket (included); CA Safety Kit (optional)
1
3M, half space anechoic
2
AES standard, continuous pink noise 50Hz-10Hz, 6dB peaks
3
Calculated at IM at power handling power input
4
Half space anechoic
S
ONNECTORS 5-way binding posts
All specifications are subject to change without notice. ©2004
One K-1109-A 5.25" woofer and one K-117-A
ymer diaphragm compression driver
1" pol
8.625" (21.9cm)
8.875" (22.54cm)
.klipsch.com
www
1-800-KLIPSCH
Loading...