Klipsch Bar 40 User Manual

BAR 40

Using Klipsch proprietary technology and offering easy installation, the Klipsch BAR
40 is a simple solution to seriously upgrade your TV sound and hear every detail of
your movies and music.

EASY PLUG AND PLAY SET UP

The BAR 40 sound bar is designed to quickly connect to your TV. Simply plug in the
included HDMI cable or an optical cable to your TV’s corresponding output and enjoy.

SLIM PROFILE DESIGN

Unlike most soundbars that are plastic, the BAR 40 is crafted using high-quality wood
materials. Measuring only 2.8” inches tall, the BAR 40 is designed to fit unobtrusively
below your TV regardless of wall mounting or table top use.

LEGENDARY KLIPSCH ACOUSTICS

Two 3/4” tweeters with 90° x 90° Tractrix® horns deliver crisp highs, while two 3”
woofers round out the enhanced sound with clear vocals and dynamic soundtracks.
Horn loaded drivers direct the sound to more efficiently bring the detail to the
listener.

DOLBY AUDIO® DECODING BUILT IN

The built-in Dolby Audio® Decoder formats all your Dolby Digital and Dolby Digital Plus
content to provide a detailed, powerful cinema experience.

6.5-INCH WIRELESS SUBWOOFER

The BAR 40 comes with a wireless 6.5” subwoofer that you can place anywhere in
your room. Wireless 2.4 GHz technology automatically connects the sound bar and the
subwoofer together. There is also a subwoofer output meaning you can add a second
subwoofer to your setup or simply replace the included wireless subwoofer with the
subwoofer of your choice.

BLUETOOTH® WIRELESS TECHNOLOGY READY

Works great with all Bluetooth-enabled smartphones, tablets and computers - allowing
you to play music direct from your device.

DIALOG / SURROUND / NIGHT MODES

Klipsch enhanced virtual surround gives you an engulfing surround sound effect
without all the additional speakers and wires. Dialog mode increases dialogue volume
for enhanced vocal clarity without increasing ambient sounds. Night mode adjusts
dynamic range for quieter listening environments.

WIRELESS REMOTE CONTROL

A full size wireless remote control included including the ability to easily adjust
subwoofer level independently.

SPECIFICATIONS

SPEAKER SYSTEM

MAX ACOUSTIC OUTPUT

HIGH FREQUENCY DRIVERS

MIDRANGE

SUBWOOFER

ENCLOSURE TYPE

SYSTEM POWER

FREQUENCY RESPONSE

INPUTS

OUTPUTS

DIMENSIONS (BAR)

DIMENSIONS (SUBWOOFER)

FINISH

VOLTAGE

WEIGHT

INCLUDED ACCESSORIES

MOUNTING OPTIONS

BUILT FROM

40” 2.1 soundbar with 6.5” wireless subwoofer

93 dB

(2) 3/4” (19mm) soft dome tweeters mated to
Tractrix® horn

(2) 3” (76.2mm) oval fiber composite cone woofers

6 1/2” (165.1mm) ported subwoofer

Bar: Wood (Sealed) • Subwoofer: Wood

TBD

TBD

HDMI-ARC • Bluetooth® • 3.5mm Analog • Optical Digital

HDMI-ARC • Subwoofer Output

39 15/16” (101.4cm) W x 2 7/8” (7.3cm) H x 3 3/8 (8.6cm) D

9 1/2” (24.1cm) W x 14 1/8” (35.9cm) H x 9 1/2” (24.1cm) D

Black

100-240V 50/60Hz internal power supply

TBD

Remote control
(2) 1.5m power cord (Region specific)
Wall mount template
(2) AAA batteries

1/4 20 Thread
Keyhole hooks

2019

3502 WOODVIEW TRACE INDIANAPOLIS, IN 46268 | KLIPSCH.COM

All specifications are subject to change without notice. ©2019 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation.

BAR 40 SPEC SHEET | V01 | 190319

1 OF 1