DTL304
•
4 TEMPERATURE
• • • • •
TERM LOGGING
•
•
T1-T2 & T3-T4
•
ENGLISH
®
Test Equipment Depot - 800.517.8431 -
99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
For Professionals...Since 1857
WARNINGS:
Always wear approved eye protection.
Do NOT use on energized circuits.
3
The Klein Tools DTL304 is a quad input dual differential Digital Temperature
Tester that offers logging, monitoring and uploading capabilities to help
analyze system performance trends with the included software.
Dimensions:
7.20”h x 3.70”w x 1.70"d
•
14° to 122°F (-10° to 50°C)
-40° to 140°F (-40° to 60°C)
Non condensing <50°F (10°C)
85% RH: 50° to 86°F (10° to 30°C)
70% RH: 86° to 104°F (30° to 40°C)
45% RH: 104° to 122°F (40° to 50°C
)
•
Operating - up to 2000 m/Storage - 10000 m
2 (AAA) type 1.5V
IEC 1010-1 (2001)
EN 61010-1 (2001)
No. 1010.1 (1992)
IP67 IEC 60529, Immersion (30 min) & Dust proof
•
2 (IEC 1010-1)
WARNINGS
WARNINGS
To ensure safe operation and service of the tester, follow these instructions.
servicing equipment.
extreme it may be exposed to in your service task.
the case.
case.
screen. Low batteries can aversely affect thermometer accuracy.
•
than 1V between any two thermocouples, and no more than 30V
Weight:
Operating Temperature:
Storage Temperature:
Humidity:
Altitude:
Battery:
Certifi cations:
Overvoltage:
Pollution Degree:
ENGLISH
A. Thermocouple Inputs
•
T1 = Thermocouple Input 1, T2 = Thermocouple Input 2,
T3 = Thermocouple Input 3, T4 = Thermocouple Input 4
•
in the input ports
• • •
30 seconds without any button pressed.
•
)
•
the maximum, minimum, and average measurements are
•
•
The “
•
for more than 1 second to start or exit “
•
The “
“
Loading...