KJB Xtreme Life Wireless QUAD/QUAD LCD, Zone Shield Wireless Quad/Quad LCD Lcd Receiver

QUAD or QUAD LCD Receiver Manual

Table of Contents

Warning & Precautions 2

Includes/What’s in the Box 3

Introduction 4

Quick Setup Guide & Product Features 5

Setup 6

Apple or Android App 15

ASP4 Installation Instructions 17

Playback 21

Specications 22

FAQ and Troubleshooting 23

Pictures 24

Warranty & Disclaimers 28

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

1

Do not open/modify the device, as it may cause damage to the unit and void the Warranty.
For internal repairs, consult your dealer or an Authorized Service Center.

Do not use any accessories or power supplies other than what comes with the device,
otherwise it could void the warranty.

Protect from humidity. Do not put it in water and be careful to protect it from rain, sea
water, or high humidity environment. Do not operate the unit near a bath tub, shower, sink,
swimming pool, etc.

Protect from high temperatures

To avoid damage or mis-operation of the device, only use in temperature of 0 ~ +40°C(32 ~
104°F).

Do not bring the device suddenly from a hot to a cold place, or vice versa. This may cause
damage to the inside of the unit by creating condensation.

EU Environmental Protection

The symbol of crossed-out garbage shows that this product should not be treated as
household waste, as it falls into the category of electric /electronic equipment for recycling.
This electronic device should not be disposed of in regular trash. We strongly advise you to
contact your local authority for proper disposal of this product.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

2

Includes

QUAD Version

1. Receiver

2. RCA Cables

3. USB Cable

4. Antenna

5. Remote

6. Power Supply

QUAD LCD Version

1. Receiver

2. Remote

3. RCA Cables

4. Receiver Brackets

5. USB Cable

6. Antenna

7. Power Supply

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

3

Introduction: Xtreme Life Wireless QUAD/QUAD LCD

Thank you for purchasing the Xtreme Life Wireless QUADs, with a Digital Wireless Receiver and built in DVR
Recording Systems capable of recording on to an SD card, and has a USB to PC interface that enables Direct
to PC Video Recording and Remote Video Access. Xtreme life are battery operated hidden camera systems
was designed to be a long life battery-operated hidden video recorder. To accomplish extended battery life,
your system uses a technology known as PIR(Passive Infrared). You’ll nd the PIR sensor located next to or near
your camera. The PIR sensor regulates power to the internal video recording components and is the triggering
system that initiates recording. When there is no activity in range of the PIR sensor, the camera and the DVR will
be powered down. When the sensor is triggered it will send a signal to turn on the camera and begin recording
almost instantly. The less activity the longer the system will maintain battery life.

To access your live video remotely, simply type in the supplied website address into your internet browser to
obtain instance remote video access, whether you are at home or away from your location. Never deal with
complicated IP Conguration again. Xtreme Life Wireless QUADS allow users to connect up to 4 Wireless Hidden
Cameras to 1 receiver for a full covert video surveillance system. Download the “EZ-See” Mobile App for Apple
and Android devices, and get instance video access on the go!

All of our SleuthGear line of hidden cameras are designed and assembled in Nashville, TN USA, and backed by
our 1 year warranty. Visit our website to see the full line of SleuthGear hidden cameras at www.mysleuthgear.
com

We invite you to explore the Quick Setup Guide below to learn more how to operate your Xtreme Life
hidden camera.

Introduction: Zone Shield Wireless Quad/Quad LCD

Thank you for purchasing the Zone Shield Wireless QUADs system. This system was designed for recording
multiply cameras to your PC or recording video on the local memory card (not included), with no additional
cost to you. With the Zone Shield system you can view video wherever you are from a PC or your Smartphone,
simply type in the supplied website address into a internet browser to obtain instance remote video access or
Download the free “EZ-See” Mobile App for Apple and Android devices, and get instance video access on the go!

Zone Shield Wireless QUADS allow users to connect up to 4 Wireless Hidden Cameras from our SleuthGear
wireless Quad line to 1 receiver for a full covert video surveillance system.

All of our SleuthGear line of hidden cameras are designed and assembled in Nashville, TN USA, and backed by
our 1 year warranty. Visit our website to see the full line of SleuthGear hidden cameras at www.mysleuthgear.
com

We invite you to explore the Quick Setup Guide below to learn more about how to operate your Zone Shield
Wireless hidden camera.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

4

Quick Setup Guide

1. Step 1: Unpack unit and insert the CD into your PC to install the provided ASP4 software on your PC.

2. Step 2: Use the provided USB cable to connect the QUAD LCD receiver to your PC.

3. Step 3: Click on the two gears icon for the Settings screen to personalize your recording preferences and
set up for remote view.

4. Step 4: Click the Quad View icon or Channel icons to return to the main screen.

5. Step 5: Plug in the Zone Shield Wireless device. The ASP4 viewing window on yor PC should now
display what the camera sees.

No more IP hassles, router congurations, or port forwarding. Locate the website address on the label found
on the back of your receiver, install ASP4 software on your PC, connect your receiver to your PC using the
provided USB cable, and the Xtreme Life unit is ready for use.

Product Features

• Build Your Own Hidden Camera System: Connect up to 4 of Any Combination of Xtreme Life or Zone
Shield QUAD Wireless Hidden Cameras

• 2 Dierence Wireless Receiver Choices: QUAD or QUAD LCD(includes built-in LCD screen)

• 4 to 1 Connectivity: Choose 1 Receiver Connect up to 4 Cameras

• Digital 2.4GHz Wireless Video Transmission with No Interference

• Continuously Power Systems for Round the Clock Surveillance

• Indoor/Outdoor Hidden Video Surveillance Systems (select models)

• Night Vision - Hidden IR Lights Capture Video at Night (select models)

• Time/Date Stamped Files

• Record your Video to PC or a Memory Card

• ASP4 PC Software

• Live Remote Video Access

• Live Mobile & Smartphone Video Access

• Free Mobile Application (Apple, Android)

• When Privacy Matters our Completely Concealed Cameras Hide in Plain Sight

• No Visible Wires

• 1 Year Manufacture Warranty

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

5

Initial Setup

Pairing Camera and Receiver

1. Connect the provided power supply to your camera. Now you are ready to pair your camera with the
receiver.

2. Turn on your receiver (see Power Button location on Pg. 3):

a) If using the QUAD LCD receiver (Fig 2) simply press the Power Button.

b) If using the QUAD receiver (Fig 2) connect the provided RCA cables from the video output on the

receiver to the input on a TV or monitor, then press the Power Button.

The Power LED will glow red when the power is on.

3. What is Pairing? Pairing creates the secure connection between the receiver and the camera(all units are
paired at the factory for easy setup).

Note: The receiver cannot be plugged into the computer via the USB cable, while attempting to pair.

a) Select a channel (1-4) on the receiver by pressing the pair button - Fig. 1.

b) Press and hold the pair button until the channel LED light ashes blue - Fig. 2

c) Press the pair button on your camera (see Pair Button location on Pgs. 24-25)

d) If the pairing is successful the blue channel LED on the receiver will ash rapidly and the camera

image will be shown on the monitor or TV.

4. To pair additional cameras press the pair button and quickly release it to change the receiver channel.
Then repeat pairing process from step 3 on a new channel.

Fig 1 Fig 2

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

6

Set up the PIR: Xtreme Life™ Wireless QUAD/QUAD LCD

( If your unit is battery operated, it comes with a PIR)

P Passive InfraRed (PIR) sensors detect levels of infrared radiation (IR). The hotter an object is, the more

IR it emits. The PIR sensor, using very little power, allows the transmitter to stay o until activity
is detected, conserving battery life. When there is a change in IR levels, considered motion, the
transmitter will turn on. When the transmitter turns on, it will automatically pair with the receiver. In
order for the transmitter to automatically pair with the receiver, they will rst need to be manually
paired. See Initial Setup (pg. 4) for pairing instructions.

P When the transmitter and receiver pair, the

camera’s image will be shown on the monitor.
When the PIR sensor no longer detects a
change in IR, the transmitter will turn o
thus conserving the battery life. While the
transmitter is turned o, the camera images will
go blank and the image to the right will appear
on your LCD screen or monitor . When using /
viewing ASP4 software, the camera images will
freeze. The next time the PIR detects IR and
triggers the transmitter, the image will resume
transmitting video.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

EITHER/OR

7

Remote Control

Button Function Description(s)

Power

Playback Press the

button to get
to the playback
menu. During
playback, press
the button
to pause,
press again to
continue

Panic
Record

Start to record
manually. Press
again to cancel
recording
mode.

QUAD QUAD display

mode

SEQUENCE Auto sequence

display mode

Button Function Description(s)

Numbers Numbers 5

to 0. English
characters and
punctuation
marks “•_•”

Clear

Return Return to last

page

Confirm Enter

Up/Down/
Right/Left

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

MENU Menu

CH1 Channel 1 &

Number 1 &
punctuation
marks “-/+”

CH2 Channel 2 &

Number 2 & “A
B C”

CH3 Channel 3 &

Number 3 & “D
E F”

CH4 Channel 4 &

Number 4 & “G
H I”

8

MENU Key sound o

Lock Key Lock

Digital Wireless Receiver Type

Zone Shield QUAD Fig 1

Channel LED
Indicator (Blue)

SD Slot

QUAD View/Single CH
Switching Button

Antenna

(SMA Reverse)

REC LED (Green) Pairing Button

With LCD Screen

Zone Shield QUAD LCD Fig 2

A/V Out

Power
Socket

Alarm Out Power LED

Power
Button

(Red)

A/V Out

Mini USB Port

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Mini USB Port

Antenna
(SMA Reverse)

Speaker
Power Button

Power LED (Red)
Power Socket

Alarm Out

Channel LED Indicator (Blue)

REC LED (Green)

SD Slot

QUAD View/Single
CH Switching Button

Pairing Button

9

Remote View Requirements

P The software and minimum hardware requirements to use remote viewing on a PC are:

• Microsoft Windows XP or Windows 7 (.NET Framework 3.5 higher)

• Internet Explorer 8 or higher; Google Chrome

• CPU: 2.0GHz or higher (only support x86 and x64)

• Memory: 1GB

• Display card: Independent display card and support DirectX 9.0 or higher.

P The software and minimum hardware requirements to use remote viewing on an iPhone/iPad are:

• iPhone 3 or higher

• iPad

• iOS 4.3 or higher

P Recommended internet speed: 1 MB per second upload speed. The download speed is irrelevant for

the network where the receiver is located as the video stream is uploaded to the EZ-See server. To
check your internet speed, go to a bandwidth testing site, such as http://www.speedtest.net/.

P In order to enable constant remote video access, a PC will need to be on at all times running the

supplied ASP4 software. The receiver will also need to be connected to the USB port of the same
PC that is running the ASP4 software.

A Few Words About Remote-View Technology

P Streaming video is only as good as the equipment and connections that enable it. There are several

factors that aect remote video streaming. These factors include the connection speed, current
system loads, and available bandwidth of the internet connections on both the web server(your
computer) and the remote view computer or smart phone. Video loss and freezing are typically
due to an insucient internet connection. If video loss or freezing occurs this will not aect ASP4
recording(video recording on hosting PC).

* If in an oce setting please consult your IT department when installing the ASP4 software. The company

network could have a rewall that blocks ASP4 from sending video to the EZ-See website.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

10

Receiver Menu

Schedule Setup

P Schedule setup - allows you to create a customized

7 day recording schedule. Each digit allocates 1 hour
of time.

P Panic - is for manual recording. When in Panic mode

press the Record button on the remote to start
manual recording.

P Motion - is for motion detection recording. When in

Motion mode the unit will only record when motion
is present.

P Continuous - is for continuous recording. When in

Continuous mode the unit will constantly record.

Recording Setup - For Memory Card

Recording Mode Only

P After recording setup is complete, press the Record

button on the remote to initiate recording.

Memory Card Informaon

P Total - shows the amount of space the memory

card can hold. If the card is inserted in the receiver
and the total shows 0.0 GB, the receiver does not
recognize the card and the memory card will need
to be formatted (see Format Pg. 16).

P Remain - shows the amount of space left on the

card.

P Full stop - will stop recording when the card is full.

P Overwrite - will delete the oldest le when the card is full and replace with new recording les.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

11

Format Memory Card

P Format Memory Card - will erase all data that is

currently on the card. This will also put a new card in
the correct format for the receiver to record onto.

Peripheral Setup

Buzzer Setup

P Buzzer - is a beeping noise the receiver makes when

an event takes place.

P Video Loss - if there is a loss in connection between

the camera and receiver, the buzzer will sound.

P Motion Detect - the buzzer will sound when motion

is detected.

P Buzzer Duration - sets the amount of time the

buzzer will sound.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

12

System Setup

Date / Time Setup

P Date / Time Setup - enable date and time stamp on

the video recording.

P Time Format - choose from a 12 hour or 24 hour

format. Set the current time and press OK to save.

Sequence Time

P Sequence Time - change the amount of time the

channel (camera) will show on the screen before
switching to the next channel (camera).

P To place the monitor in sequence mode, press the

Sequence button on the remote.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

13

Factory Default

P Factory Default - this will return all settings to as

they were from the manufacturer.

P Using this function is a good troubleshooting step

regarding any type of issue with the receiver.

Brightness Setup

P Brightness Setup - change the level to

increase or decrease the brightness of the
QUAD LCD display’s image.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

14

Apple or Android App

P Open the App Store and search for “EZ-See” to download the app.

Phone Tablet

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

15

P Select the receiver ID

P Watch live stream video

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

16

ASP4 Installation Instructions (for remote view)

1. Insert the supplied ASP4
software CD into your
computer.

2. Double click on the setup
icon to start the installation
wizard.

3. Click next, to run through the installation
wizard.

4. To create a shortcut to the
software on your desktop
nd the installation location
of the software. Right click
ASP4 and go to send to and
select Desktop.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

17

ASP4 User Interface

System Setting Recording Mode

Open le, to search the
recording les

Snapshot, to save JPG

Network ON/OFF
(for remote view)

CH1 Full screen display

picutre

CH2 Full screen display CH3 Full screen display

CH4 Full screen display QUAD-View display

Manual recording during

Backwards
live view & backup les
during playback

Pause Forwards

Stop Play

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

18

ASP4 Settings

P After installation, open the

software on the PC and click the
settings button. Located at the
top right hand corner.

P “Snapshot” and “Video” will

show the storage location of
the recorded data. Here you can
change the storage location of
your videos or snapshots.

P Via “Network Settings” users

can change the user name and
password. The user name and
password has a 12 digit capacity.

P “Go to remote view at:” shows

the website that is specic to this
receiver. Use Internet Explorer or Google Chrome to log in and access the video live stream by typing
in the link to the address bar of the web browser.

P Click “OK” to save the settings after they have been changed.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

19

Remote View

1. Enter the remote view
address in to the address bar
as shown below.

P Enter the user name and password

if changed from default user name/
password.

2. If user name and password are
correct, ASP4 browser plugin will
launch and the live video stream
will appear.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

20

Video Playback

P When viewing the camera images live, press

button on the remote to access video

playback/recordings.

P Playback List - shows the dates of recorded

video by date and time stamp. Scroll to the
playback date you would like to view and press
OK on the remote.

P The next list will show the time stamp of when

the recording started and ended. Scroll to the
time you would like to view and press OK on the
remote.

P During video play back press the up or down

arrows to move to the next video.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

21

Specifications

Channel Pairing Up to 4 Transmitting Cameras to 1 Receiver

Operation Frequency Range 2408.625 ~ 2470.5 MHz

Channels for Hopping 53CH for NTSC / 18CH for PAL

Transmission Range Up to 150M (164yds)

Transmitter RF output power 15.5 ~ 18.5 dBm

Video Source Input Analog

Resolution / Frame Rate 640x480 @ 30fps

Antenna Connection Internal Fixed

Antenna Gain 1.5 dBi

RF Data Rate 3Mbits /Second

Power Input 12V, 1A

Receiving Sensitivity > -85 dBm

Video Compression MPEG4

Recording Mode Schedule Continuous, Schedule Motion, Panic

Playback Mode Via device itself or bundled software on PC

Recording Storage SD Card (support up to SDXC 64GB)

Alarm Output Yes – 1 set (NC or NO)

USB Connection Yes – USB Mini-B output

Operation Temperature 0°C ~ 40°C (32°F~ 104°F)

Image Sensor ¼” SOC Sensor

Eective Pixels 640x480

Sensor Scan Mode 54MHz Progressive

Lens 2.5mm Fish Eye or 2.1mm Peak Cone

S/N Ratio > 45dB

Sensitivity > 11.5V/lux-s at 550nm

White Balance Auto Tracking White Balance

Viewing Angle 62 degree

IR Filter 940nm

Additional Specications for Xtreme Life product line only

PIR Motion Sensor Yes - Trigger for recording

Battery Life Up to 30 days in standby; Up to 8 hours continuous

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

22

FAQ and Troubleshooting

Q. How do I pair my devices?

a) Select a channel on the receiver by pressing the pair button

A.

b) Press and hold the pair button until the channel LED light ashes blue
c) Press the pair button on your camera (see Pair Button location on Pg. 6 of your manual)
d) If the pairing is successful the blue channel LED on the receiver will ash rapidly and the camera image
will be shown on the monitor or TV.

Q. How do I format my SD card?

SD cards is usually required to make them compatible with the device that they will be used with. For our

A.

wireless products you can format the SD card using the setting “Format SD Card” in the menu options. This is
required to ensure the device to record video.

Q. What do I need to record or to remote view my video?

In order to enable constant remote video access, a PC will need to be on at all times running the supplied

A.

ASP4 software. The receiver will also need to be connected to the USB port of the same PC that is running the
ASP4 software.

Q. Can I add cameras at anytime?

Yes, you can add up to 3 more cameras at anytime.

A.

Q. How many cameras can I add to the Zone Shield Wireless system?

You can add up to 4 cameras for each wireless receiver. Every model can be added to and already existing

A.

receiver.  you have already purchased one (example) Clock Radio, you can add a Wall clock you can mix and
match any Zone Shield ® wireless looks and you can add Xtreme Life ® or Night Vision wireless models.

Q. What happens when my SD card is full.

Via the Settings menu you can set your SD card to full stop or Overwrite. Full stop means no new recordings

A.

can be saved when the card is full. Overwrite means the system will delete the oldest recorded les to make
space for newly recorded les.

Q. Does this device work with a MAC Computer?

No, it only works with Microsoft OS up to Windows 7.

A.

Q. Does this work with Windows OS 8?

No, it works up to Windows OS 7.

A.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

23

Pair Button Location

Clock Radio

Air Puri er

Fan

Pairing Button

Pairing Button

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

24

Pair Button Location

Book Camera

Pairing Button

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

25

Pair Button Location

Smoke Detector

Rectangle Clock

Pairing Button

DVD

Pairing Button

Pairing Button

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

26

Pair Button Location

Mantle Clock

Teddy Bear

Pairing Button

Pairing Button

Wall Clock

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

Pairing Button

27

Warranty & Disclaimers

Manufacturer warrants all Covert Video and Sleuth Gear Hidden Video Products (Product) assembled and sold by Manufacturer to be free of defects in material and
workmanship, subject to the following conditions. The duration of Manufacturer’s warranty with respect to the Product is limited to one (1) year from the date of sale to the
original consumer purchaser only for Products delivered within the fty (50) states of the United States, District of Columbia, or the possessions and territories of the United
States

No other express warranties are made with respect to any Product. All implied warranties, including warranties of merchantability and tness for a particular
purpose are limited to the warranty period set forth above. This warranty is not transferable and applies only to the original consumer purchaser of the Product.

Manufacturer will, as its sole obligation under this warranty, replace or repair, at its option, any Product that does not conform to this warranty. Under no circumstances will
the Manufacturer issue credit or give a refund for Product covered by this warranty. Furthermore, under no circumstances will Manufacturer be liable for any incidental or
consequential damages under this warranty or any implied warranties.

What is not covered:

This limited warranty does not cover Products that in Manufacturer’s judgment have damage resulting from any (i) deviation from Manufacturer’s operating instructions as
printed in Manufacturer’s catalog or on any packaging, labels or other literature provided with a Product, (ii) installation of a Product in a manner which is inconsistent with
Manufacturer’s written instructions, (iii) alteration, modication of or tampering with a Product, (iv) misuse, (v) neglect, (vi) abuse, (vii) accident, (viii) power surge, static
electricity or other electrical discharge, (ix) normal wear and tear, (x) commercial use, (xi) service by anyone other than a Manufacturer authorized repair facility, or (xii) other
improper application, installation or operation of the Product. Or, (xiii) have been purchased from inventory clearance or liquidation sales or other sales in which Manufacturer
expressly disclaims its warranty obligation pertaining to the Product.

How you (the Customer) can get service:

To obtain warranty service during the warranty period, you must return the defective Product with the original receipt to the original place of purchase. Contact them for
return instructions.

If warranty service is needed at any time during the warranty period, the purchaser will be required to furnish a sales receipt/proof of purchase indicating the date of
purchase, amount paid and place of purchase. Customers who fail to provide such proof of purchase will be charged for the repair of any Product.

How state law relates to the warranty:

Some states do not allow limitations on how long implied warranties last, or the exclusion or the limitation of incidental or consequential damages. So the above limitations
or exclusions may not apply to you. This warranty gives you specic legal rights. You may also have other rights that may vary from state to state.

NO PERSON IS AUTHORIZED BY MANUFACTURER TO MODIFY OR ADD TO THIS LIMITED WARRANTY.

For warranty information on Products delivered outside the United States please contact the original place of purchase.

DO NOT ATTEMPT TO RETURN PRODCUT TO ORIGINAL MANUFACTURER, AS THIS PRODUCT HAS BEEN MODIFIED AND IS NO LONGER SUBJECT TO ORIGINAL
MANUFACTURER’S WARRANTY. IN THE CASE OF A DEFECTIVE PRODUCT, CONTACT PLACE OF PURCHASE FOR RETURN PROCEDURE.

IT IS THE USER’S RESPONSIBILITY TO ENSURE THAT THIS EQUIPMENT IS USED IN ACCORDANCE WITH THE LAW(S) OF THE JURISDICTION IN WHICH THIS EQUIPMENT IS UTILIZED.

THIS PRODUCT MAY BE SUBJECT TO THE JURISDICTION OF THE U.S. WIRE AND COMMUNICATIONS ACT (18 UNITED STATES CODE §§ 2510-2522) (HEREINAFTER REFERRED
TO AS “ACT”) REGARDING SURREPTITIOUS RECORDING DEVICES. THE USES OF SUCH PRODUCTS ARE REGULATED BY THE ACT. ADDITIONALLY, THE LAWS OF SOME STATES,
COUNTIES, CITIES OR LOCALITIES MAY PROHIBIT THE POSSESSION AND/OR USE OF THIS OR SIMILAR PRODUCTS. IT IS THE RESPONSIBILITY OF THE RETAIL BUYER AND/OR
FINAL CONSUMER (HEREINAFTER REFERRED AS “BUYER”) TO ASCERTAIN, UNDERSTAND, AND OBEY ANY AND ALL APPLICABLE LOCAL, STATE, AND FEDERAL LAWS REGARDING
POSSESSION AND USE OF THIS PRODUCT. BY PURCHASING THIS PRODUCT THE BUYER REPRESENTS THAT IT WILL INDEMNIFY THE MANUFACTURER AND/OR DISTRIBUTOR
AND HOLD THEM HARMLESS FOR ANY POSSESSION, USE AND/OR MISUSE THAT VIOLATE ANY FEDERAL, STATE OR LOCAL LAW OR REGULATION REGARDING AUDIO AND/
OR VIDEO DEVICES. BUYER AGREES TO CONSULT WITH AN ATTORNEY AT LAW REGARDING POSSESSION OR APPROPRIATE USE OF A COVERT DEVICE. NOTE THAT LAWS
AND REGULATIONS VARY FROM STATE TO STATE. IF BUYER EXPORTS THIS PRODUCT, THE BUYER WILL COMPLY WITH US EXPORT CONTROL LAWS AND ANY APPLICABLE
DEPARTMENT OF COMMERCE, STATE AND TREASURY REGULATIONS GOVERNING EXPORTS AND SALES TO PROHIBITED END USERS. DIVERSION OR RE-EXPORT CONTRARY
TO U.S. LAW IS PROHIBITED. BUYER SHALL COMPLY WITH ALL APPLICABLE FEDERAL, STATE, AND LOCAL LAWS AND REGULATIONS GOVERNING THE SALE OF THIS PRODUCT,
INCLUDING U.S. EXPORT CONTROL LAWS AND THE U.S. DEPARTMENT OF COMMERCE AND TREASURY REGULATIONS GOVERNING SALES TO PROHIBITED END USERS.

PART 15 LOW POWER: ANY CHANGES OR MODIFICATIONS TO THIS EQUIPMENT WITHOUT THE EXPESS AUTHORIZATION OF THE MANUFACTURER COULD VOID THE USER’S
AUTHORITY TO OPERATE THIS EQUIPMENT(RULE 15.21 OF THE FCC).

THIS EQUIPMENT HAS BEEN TESTED AND HAS BEEN FOUND TO BE IN COMPLIANCE WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC
RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTIONS AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT USES,
GENERATES AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE
TO RADIO COMMUNICATIONS.

KJB Security | www.mysleuthgear.com | 800-590-4272 | Find us on Facebook at facebook/sleuthgear and on Twitter @sleuthgear

28