KJB WF1120 User Manual

User manual

Please read the user manual carefully before use.

1 Product Description



2. Installation

Camera Status

System start up- LED Flash Yellow

Binding mode-LED Flash Green Slowly (flashes once per second)
Connecting to Wi-Fi-LED Flash Green Fast (flashes three times per second)
Camera functioning properly-LED is on Green Continuously

Note: There will be a voice prompt to advise the user and help set up the device. The
lights and voice prompts can be turned on and off by using the KJB Wi-Fi APP. See
below screenshot:

Note: To reset factory settings, locate the reset button on the bottom of the device. Press
and hold the button for 3-5 seconds. When the LED turns yellow, the device will restart and
restore the factory settings. See image below:

3. APP Setup

For iOS Users (iPhone, iPad, Etc):

Method 1: APP Store：
Go into the APP Store and search for “KJB Wi-Fi”. Download and install the

APP onto iPhone or iPad.

Method 2: Scan the QR code：
Use a QR Scanner APP on your iPhone or iPad to scan the QR code below: