KitchenAid YKFEG500EWH Owner's Manual
THANK YOU for purchasing this high-quality product. Register your new range at www.kitchenaid.ca.
ELECTRIC RANGE
USER INSTRUCTIONS
For future reference, please make a note of your product model and serial numbers. These can be located on the oven frame behind
the top right side of the oven door.
Model Number __________________________________________ Serial Number ___________________________________________
Table of Contents
RANGE SAFETY.......................................................................................2
The Anti-Tip Bracket.............................................................................2
KEY USAGE TIPS ....................................................................................4
AquaLift® Self-Cleaning Technology.....................................................4
Surface Temperatures ..........................................................................4
Preheating .............................................................................................4
Ceramic Glass Cooktop Cleaning ........................................................4
FEATURE GUIDE .....................................................................................5
COOKTOP USE.......................................................................................7
Cookware..............................................................................................8
Home Canning ......................................................................................9
OVEN USE ..............................................................................................10
Electronic Oven Controls....................................................................10
Keep Warm .........................................................................................11
Sabbath Mode ....................................................................................11
Aluminum Foil......................................................................................11
Positioning Racks and Bakeware.......................................................12
Oven Vent............................................................................................12
Baking and Roasting...........................................................................13
Broiling ................................................................................................13
Convection Cooking ...........................................................................13
EasyConvect™ Conversion................................................................14
Proofing Bread ....................................................................................14
Cook Time...........................................................................................14
RANGE CARE.........................................................................................15
Clean Cycle .........................................................................................15
General Cleaning.................................................................................16
Oven Light...........................................................................................17
Appliance Outlets................................................................................17
PROBLEM SOLVER...............................................................................17
ACCESSORIES ......................................................................................19
WARRANTY............................................................................................20
W10694007B
RANGE SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor or wall.
• Slide range back so rear range foot is under anti-tip bracket.
• See installation instructions for details.
WARNING
Anti-Tip
Bracket
Range Foot
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having
the anti-tip bracket fastened down properly.
2
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
■
WARNING:
TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS
UNDER ANTI-TIP BRACKET.
■
CAUTION:
Do not store items of interest to children in
cabinets above a range or on the backguard of a range –
children climbing on the range to reach items could be
seriously injured.
■ Proper Installation – Be sure the range is properly installed
and grounded by a qualified technician.
■ Never Use the Range for Warming or Heating the Room.
■ Do Not Leave Children Alone – Children should not be left
alone or unattended in area where the range is in use.
They should never be allowed to sit or stand on any part of
the range.
■ Wear Proper Apparel – Loose-fitting or hanging garments
should never be worn while using the range.
■ User Servicing – Do not repair or replace any part of the
range unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
■ Storage in or on the Range – Flammable materials should
not be stored in an oven or near surface units.
■ Do Not Use Water on Grease Fires – Smother fire or flame
or use dry chemical or foam-type extinguisher.
■ Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
■ DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS – Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
■ Use Proper Pan Size – The range is equipped with one or
more surface units of different size. Select utensils having
flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a
portion of the heating element to direct contact and may
result in ignition of clothing. Proper relationship of utensil to
burner will also improve efficiency.
■ Never Leave Surface Units Unattended at High Heat
Settings – Boilover causes smoking and greasy spillovers
that may ignite.
■ Make Sure Reflector Pans or Drip Bowls Are in Place –
Absence of these pans or bowls during cooking may
subject wiring or components underneath to damage.
■ Protective Liners – Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in
the manual. Improper installation of these liners may result
in a risk of electric shock, or fire.
■ Glazed Cooking Utensils – Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range-top service without breaking
due to the sudden change in temperature.
■ Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units – To reduce the risk of burns,
ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of a
utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
■ Do Not Soak Removable Heating Elements – Heating
elements should never be immersed in water.
■ Do Not Cook on Broken Cooktop – If cooktop should
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
■ Clean Cooktop With Caution – If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
■ Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
■ Do Not Heat Unopened Food Containers – Build-up of
pressure may cause container to burst and result in injury.
■ Keep Oven Vent Ducts Unobstructed.
■ Placement of Oven Racks – Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
■ DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN – Heating elements may be hot even
though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use,
do not touch, or let clothing or other flammable materials
contact heating elements or interior surfaces of oven until
they have had sufficient time to cool. Other surfaces of the
appliance may become hot enough to cause burns – among
these surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven doors.
For self-cleaning ranges –
■ Do Not Clean Door Gasket – The door gasket is essential
for a good seal. Care should be taken not to rub, damage,
or move the gasket.
■ Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
■ Clean Only Parts Listed in Manual.
■ Before Self-Cleaning the Oven – Remove broiler pan and
other utensils.
For units with ventilating hood –
■ Clean Ventilating Hoods Frequently – Grease should not
be allowed to accumulate on hood or filter.
■ When flambeing foods under the hood, turn the fan on.
3
KEY USAGE TIPS
AquaLift® Self-Cleaning Technology
AquaLift® Self-Cleaning Technology is a first-of-its-kind cleaning
solution designed to minimize the time, temperature and odors that
ordinarily come with traditional self-cleaning methods. With
AquaLift
interior of the oven is activated with heat and water to release
baked-on soil. To use AquaLift
wipe out loose debris, pour water into the oven bottom and run the
AquaLift
1
®
Self-Cleaning Technology, an exclusive coating on the
®
Self-Cleaning Technology, simply
®
Self-Cleaning cycle. When the cycle finishes in under
hour at a lower temperature than traditional self-cleaning
methods, just wipe out the remaining water and loose debris. See
the “Clean Cycle” section for more detailed instructions. For
additional information, frequently asked questions and videos on
using AquaLift® Self-Cleaning Technology, visit our website at
http://whirlpoolcorp.com/aqualift.
Surface Temperatures
When the range is in use, all range surfaces may become hot, such
as the knobs and oven door.
Storage Drawer
When the oven is in use, the drawer may become hot. Do not store
plastics, cloth, or other items that could melt or burn in the drawer.
Oven Vent
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Do not set plastics, paper or
other items that could melt or burn near the oven vent.
Preheating
When beginning a Bake, Convect Bake or Convect Roast cycle, the
oven will begin preheating after Start is pressed.
approximately 12 to 15 minutes to reach
the oven racks provided with your oven inside the oven cavity.
Higher temperatures will take longer to preheat. The preheat cycle
rapidly increases the oven temperature. The actual oven
temperature will go above your set temperature to offset the heat
lost when your oven door is opened to insert food. This ensures that
when you place your food in the oven, the oven will begin at the
proper temperature. Insert your food when the preheat tone sounds.
Do not open the door during preheat before the tone sounds.
The oven will take
350°F (177°C)
with all of
Ceramic Glass Cooktop Cleaning
To avoid damaging the cooktop, do not use steel wool, abrasive
powder cleansers, chlorine bleach, rust remover or ammonia.
1. Remove food/residue with the Cooktop Scraper.
■ For best results, use the Cooktop Scraper while the
cooktop is still warm, but not hot to the touch. It is
recommended to wear an oven mitt while scraping the
warm cooktop.
■ Hold the Cooktop Scraper at approximately a 45° angle
against the glass surface and scrape the residue. It will be
necessary to apply pressure in order to remove the residue.
Allow the cooktop to cool down completely before proceeding
2.
to Step
2. Apply a few dime-sized drops of affresh® Cooktop Cleaner to
the affected areas.
■ Rub affresh
with the blue Cooktop Cleaning Pad. Some pressure is
needed to remove stubborn stains.
■ Allow the cleaner to dry to a white haze before proceeding
to Step 3.
3. Polish with a clean, dry cloth or a clean, dry paper towel.
®
Cooktop Cleaner onto the cooktop surface
■ Repeat steps 1 through 3 as necessary for stubborn or
burned-on stains.
The Complete Cooktop Cleaner Kit is available for order including
the following:
■ Cooktop Scraper
■ affresh
■ Blue Cooktop Cleaning Pads
®
Cooktop Cleaner
See the “Accessories” section for ordering information and part
numbers.
4
FEATURE GUIDE
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Customer Service
section at www.kitchenaid.ca.
KEYPAD FEATURE INSTRUCTIONS
CLOCK Clock This clock can use a 12- or 24-hour cycle. See “Electronic Oven Controls” section.
1. Press CLOCK.
2. Press “3” for AM or “6” for PM.
3. Press the number keypads to set the time of day.
4. Press CLOCK or START.
OVEN LIGHT Oven cavity light While the oven door is closed, press OVEN LIGHT to turn the light on and off. The oven light will
TIMER SET/OFF Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
START Cooking start The Start keypad begins any oven function. If Start is not pressed within 2 minutes after
OFF Range function The Off keypad stops any oven function except the Clock, Timer, Control Lock, and Warm Zone.
BAKE Baking and
roasting
BROIL Broiling 1. Press BROIL.
come on when the oven door is opened.
1. Press TIMER SET/OFF.
2. Press the number keypads to set the length of time in hr-min-min. Leading zeros do not
have to be entered. For example, for 2 minutes, enter “2.”
3. Press TIMER SET/OFF to begin the countdown. If enabled, end-of-cycle tones will sound at
end of countdown.
4. Press TIMER SET/OFF to cancel the Timer and return to the time of day. Do not press the
Off keypad because the oven will turn off.
pressing a keypad, the function is canceled and the time of day is displayed.
1. Press BAKE.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF when finished.
2. Select the broiling temperature by pressing “1” - high (500°F [261°C]), “2” - medium (450°F
[234°C]) or “3” - low (400°F [204°C]).
3. Press START, and then allow the oven to preheat for 5 minutes.
4. Position the cookware in the oven, and then leave the door open 6" (15 cm) at the broil stop
position.
5. Press OFF when finished.
5
KEYPAD FEATURE INSTRUCTIONS
CONVECT BAKE Convection
cooking
1. Press CONVECT BAKE.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF when finished.
CONVECT ROAST Convection
CONVECT BROIL Convection
EASYCONVECT™
CONVERSION
BREAD PROOF Proofing bread 1. Press BREAD PROOF until the desired proof is displayed (“Standard Proof” or “Rapid
KEEP WARM Hold warm Food must be at serving temperature before placing it in the warmed oven.
cooking
cooking
Recipe
conversion for
convection
cooking
1. Press CONVECT ROAST.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF when finished.
1. Press CONVECT BROIL.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START and leave the door closed.
4. To change the temperature, repeat Step 2. Press START for the change to take effect.
5. Press OFF when finished.
NOTE: For best results, preheat your oven to the required temperature prior to using
EasyConvect™ Conversion. After preheating is complete, press OFF before using
EasyConvect™ Conversion.
1. Press the appropriate EasyConvect™ keypad (MEATS, PIZZA, BAKED GOODS or OTHER).
2. Press START.
3. Press the number keypads to enter the standard cook temperature, and then press START.
4. Enter the standard cook time, and then press START.
5. Place food in the oven at the appropriate time.
Check food for doneness before the stop time is reached. If food will not be done when stop
time is reached, add more cooking time before time elapses. See the “Cook Time” section.
At the end of the stop time, the oven will automatically turn off.
6. Press OFF when finished.
Refer to the “EasyConvect™ Conversion” section for more information.
Proof”).
NOTE: “Rapid” operates at a slightly higher temperature for second rise of formed dough.
2. Press START.
Let the dough rise until nearly doubled in size. Proofing time may vary depending on dough
type and quantity.
3. Press OFF when finished proofing.
Refer to the “Proofing Bread” section for more information.
1. Press KEEP WARM.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START.
4. Press OFF when finished.
DELAY START Delayed start The Delay Start keypad is used to enter the starting time for an oven function with a delayed
COOK TIME Timed cooking Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of
WARM ZONE
ON/OFF
Warming zone Press WARM ZONE ON to select the warming element on the cooktop, and then press START.
start. Delay Start should not be used for foods such as breads and cakes because they may
not bake properly.
To set a Cook Time or a Delayed Cook Time, see “Cook Time” section.
time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
Press WARM ZONE OFF to turn off the warming element.
6
KEYPAD FEATURE INSTRUCTIONS
WARNING
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
REMEMBER: When range is in use, the entire cooktop area
may become hot.
AQUALIFT SELF
CLEAN
CONTROL LOCK
hold 3 sec.
AquaLift® selfclean cycle
Oven control
lockout
See the “Clean Cycle” section.
No keypads will function with the controls locked.
1. Check that the oven and the Timer are off.
2. Press and hold the “0” keypad for 3 seconds.
3. If enabled, a tone will sound, and “CONTROL LOCKED” will be displayed.
4. Repeat to unlock.
OPTIONS Oven use
functions
Enables you to personalize the audible tones and oven operation to suit your needs. See the
“Oven Use” section.
COOKTOP USE
The control knobs can be set to anywhere between “H” and “L.”
Push in and turn to setting.
Ceramic Glass
The surface cooking area will glow red when an element is on.
Some parts of the surface cooking area may not glow red when an
element is on. This is normal operation. It will also randomly cycle
off and back on again, even while on High, to keep the cooktop
from extreme temperatures.
It is normal for the surface of ceramic glass to appear to change
color when surface cooking areas are hot. As the glass cools, it
will return to its original color.
Clean the cooktop after each use to help avoid scratches, pitting,
abrasions and to condition the glass surface. Ceramic glass
cooktop cleaner and a cooktop scraper are also recommended for
stubborn soils. Do not use abrasive cleaners, cleaning pads or
harsh chemicals for cleaning. The Cooktop Care Kit Part Number
31605 contains all of the items needed to clean and condition your
ceramic glass cooktop. Refer to the “Range Care” section for
additional information.
IMPORTANT: To avoid permanent damage to the cooktop surface
and to make soils easier to remove, clean the cooktop after each
use to remove all soils.
■ For cooktops with two dual elements in the front positions, the
fastest boiling performance for pots 10" (25.4
cm) and larger
will be on the larger dual element with both elements on “Dual
Hi.” For best low heat performance on pans 10" (25.4
cm) and
larger, use the smaller dual element set at “Single Lo.”
■ For best melting performance with small pans, use the Even-
Heat™ element.
■ Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed or
dented bottoms could cause uneven heating and poor cooking
results.
■ Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the ruler,
no space or light should be visible between it and the
cookware.
■ Cookware designed with slightly indented bottoms or small
expansion channels can be used.
■ Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits
when heated.
■ Avoid storing jars or cans above the cooktop. Dropping a
heavy or hard object onto the cooktop could crack the
cooktop.
■ To avoid damage to the cooktop, do not leave a hot lid on the
cooktop. As the cooktop cools, air can become trapped
between the lid and the cooktop, and the ceramic glass could
break when the lid is removed.
■ For foods containing sugar in any form, clean up all spills and
soils as soon as possible. Allow the cooktop to cool down
slightly. Then, while wearing oven mitts, remove the spills using
a scraper while the surface is still warm. If sugary spills are
allowed to cool down, they can adhere to the cooktop and can
cause pitting and permanent marks.
■ To avoid scratches, do not slide cookware or bakeware across
the cooktop. Aluminum or copper bottoms and rough finishes
on cookware or bakeware could leave scratches or marks on
the cooktop.
■ Do not cook popcorn in prepackaged aluminum containers on
the cooktop. They could leave aluminum marks that cannot be
removed completely.
■ To avoid damage to the cooktop, do not allow objects that
could melt, such as plastic or aluminum foil, to touch any part
of the entire cooktop.
■ To avoid damage to the cooktop, do not use the cooktop as a
cutting board.
■ To avoid damage to the cooktop, do not cook foods directly on
the cooktop.
7
Cooktop On Indicator Light
AB
B
WARNING
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
The Cooktop On Indicator Light is located on the console panel.
When any control knob on the console panel is turned on, the
Cooktop On Indicator Light will glow.
Hot Surface Indicator Light
On ceramic glass models, the Hot Surface Indicator Light is
located on the console panel.
The Hot Surface Indicator Light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area is turned off.
Dual-Size Cooking Element
The Dual-Size Cooking Element offers flexibility depending on the
size of the cookware. Single size can be used in the same way as
a regular element. The dual size combines both the single and
outer element and is recommended for larger size cookware.
A. Dual
B. Single
Warm Zone Element
Use the Cooktop Warm Zone element to keep cooked foods
warm. One
food quality.
Do not use it to heat cold foods.
The Warm Zone element can be used alone or when any of the
other surface cooking areas are being used.
The Warm Zone element area will not glow red when cycling on.
However, the Element On indicator light will glow while the
Cooktop Warm Zone element is in use.
■ Use only cookware recommended for oven and cooktop use.
■ Cover all foods with a lid or aluminum foil. When warming
■ To avoid damage to the cooktop, do not use plastic wrap to
■ Use pot holders or oven mitts to remove food.
hour is the recommended maximum time to maintain
baked goods, allow a small opening in the cover for moisture
to escape.
cover food because the plastic wrap may melt.
Even-Heat™ Element
The Even-Heat™ Element offers flexibility due to a wide range of
settings between High and Melt. The High heat option can be
used to boil small amounts of liquid quickly. To reduce the power
setting, turn the knob clockwise. The Melt setting is designed for
delicate foods that require low heat, such as when melting
chocolate or holding sauces. Use cookware appropriate in size for
the Even-Heat™ Element.
A
A. Melt option
B. High heat option
To U se :
1. To turn on, press WARM ZONE ON and then START.
2. To turn off, press WARM ZONE OFF.
Cookware
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a wellfitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base, they can leave permanent marks on the surfaces.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has the
same characteristics as its base material. For example, aluminum
cookware with a nonstick finish will take on the properties of
aluminum.
Cookware with nonstick surfaces should not be used under the
broiler.
8
Check for flatness by placing the straight edge of a ruler across the
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
1 9
2 0
1
2
3
4
5
6
7
bottom of the cookware. While you rotate the ruler, no space or
light should be visible between it and the cookware.
Use flat-bottomed cookware for best cooking results and energy
efficiency. The cookware should be about the same size as the
cooking area outlined on the cooktop. Cookware should not extend
more than ½" (1.3 cm) outside the area.
Use the following chart as a guide for cookware material
characteristics.
Cookware Characteristics
Aluminum ■ Heats quickly and evenly.
■ Suitable for all types of cooking.
■ Medium or heavy thickness is best for
most cooking tasks.
■ May leave aluminum residues, which
may be diminished if cleaned
immediately after cooking.
Cast iron ■ Heats slowly and evenly.
■ Good for browning and frying.
■ Maintains heat for slow cooking.
■ Rough edges or burrs may scratch the
cooktop.
Ceramic or
Ceramic glass
■ Follow manufacturer’s instructions.
■ Heats slowly, but unevenly.
■ Ideal results on low to medium heat
settings.
■ May scratch the cooktop.
Copper ■ Heats very quickly and evenly.
■ May leave copper residues, which
may be diminished if cleaned
immediately after cooking.
■ Can leave a permanent stain or bond
to the cooktop if overheated.
Home Canning
Canning can be performed on a glass smooth top cooking surface
or traditional coil element cooktop. When canning for long periods,
alternate the use of surface cooking areas or elements between
batches. This allows time for the most recently used areas to cool.
■ Center the canner on the largest surface cooking area or
element. On electric cooktops, canners should not extend
more than ½" (1.3
element.
■ Do not place canner on 2 surface cooking areas or elements at
the same time.
■ On ceramic glass models, use only flat-bottomed canners to
avoid damage to the cooktop and elements.
■ For more information, contact your local agricultural extension
office, or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.
cm) beyond the surface cooking area or
Earthenware ■ Follow manufacturer’s instructions.
■ Use on low heat settings.
■ May scratch the cooktop.
Porcelain
enamel-onsteel or cast
iron
Stainless steel ■ Heats quickly, but unevenly.
■ See stainless steel or cast iron.
■ Porcelain enamel bakeware without
the metal base may bond to the
cooktop if overheated.
■ A core or base of aluminum or copper
on stainless steel provides even
heating.
9
OVEN USE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
Electronic Oven Controls
IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and wellventilated room.
Control Display
The display will light up when first powered up or after a power
loss. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
■ Valid pad press.
■ Oven is preheated (long tone).
■ Kitchen timer (long tone with a reminder tone every
seconds).
60
■ Function has been entered.
Three Tones
■ Invalid pad press.
Four Tones
■ End of cycle (with a reminder tone every 60 seconds).
Use the Options key to change the tone settings.
Options
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Options
keypad
.
Use the Options keypad to scroll through the features that can be
changed. Each press of the Options keypad will advance the
display to the next setting. After selecting the feature to be
changed, the control will prompt you for the required input. Details
of all of the feature changes are explained in the following sections.
Press OFF to exit Options.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but can be changed to
Celsius.
1. Press OPTIONS until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones.
1. Press OPTIONS until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press OPTIONS until “SOUND VOLUME” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press OPTIONS until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press OPTIONS until “KEYPRESS TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.
1. Press OPTIONS until “REMINDER TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
12/24 Hour Clock
1. Press OPTIONS until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120
demonstrated without heating elements or burners turning on. If
this feature is activated, the oven will not work.
1. Press OPTIONS until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
V power connection and permits the control features to be
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12 hours
after the oven initiates a cook or clean function. This will not
interfere with any timed or delay cook functions.
1. Press OPTIONS until “12 HR AUTO OFF” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
10
Languages - Scrolling Display Text
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Language options are English, Spanish and French.
1. Press OPTIONS until “LANGUAGE” is displayed.
2. The current setting will be displayed.
3. Press the number keypads to adjust the setting.
4. Press OFF to save the setting and display the time of day.
Energy Save
The Energy Save mode deactivates the display to reduce energy
consumption.
1. Press OPTIONS until “ENERGY SAVE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press OFF to save the setting and display the time of day.
To Use:
1. Press KEEP WARM.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
NOTE: The temperature may be changed at any time by
pressing the number keypads to enter the desired temperature
and then START.
3. Press START.
4. Place food in the oven.
5. Press OFF when finished.
6. Remove food from the oven.
To Cancel Keep Warm:
Press OFF. Remove food from oven.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Most thermometers are slow to
react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press OPTIONS until “TEMP CALIB” is displayed.
2. The current setting will be displayed. Press the “1” keypad to
toggle between the oven and the warming drawer.
3. Press START to select the choice displayed in Step 2. Wait
seconds for the display to change, or press START, and then
10
continue with Step
4. Press the “3” keypad to increase the temperature in 5°F (3°C)
increments, or press the “6” keypad to decrease the
temperature in 5°F (3°C) increments. The range is from -30°F to
+30°F (-18°C to +18°C).
5. Press OFF to save the setting and display the time of day.
4.
Keep Warm
IMPORTANT: Food must be at serving temperature before placing
it in the warmed oven. Food may be held up to 1 hour; however,
breads and casseroles may become too dry if left in the oven
during the Keep Warm function. For best results, cover food.
The Keep Warm feature allows hot cooked foods to stay at serving
temperature.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate. All
other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will not turn
on or off and the heating elements will not turn on or off
immediately.
NOTE: Warm Zone is not available when Sabbath Mode is
enabled.
To Enable Sabbath Mode Capability (One Time Only):
1. Press OPTIONS until “SABBATH” is displayed.
2. Press the “1” keypad. Sabbath Mode can be activated for
baking.
3. Press START or OFF to save the setting and display the time of
day.
NOTE: To disable the Sabbath Mode, repeat steps 1 through 3
to change the status from “SABBATH ON” to “SABBATH OFF.”
To Activate Sabbath Mode:
1. Press BAKE.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
3. Press START.
For timed cooking in Sabbath Mode, press COOK TIME, then
the number keypad to set the desired cook time. Press START.
4. Press OPTIONS. Three tones will sound. Then press “7.” “SAb”
will appear in the display.
To Adjust Temperature (When Sabbath Mode is Running):
1. Press BAKE.
2. Press the number keypad as instructed by the scrolling text to
select the new temperature.
NOTE: The temperature adjustment will not appear on the
display, and no tones will sound. The scrolling text will be
shown on the display as it was before the keypad was pressed.
3. Press START.
To Deactivate Sabbath Mode:
Press OPTIONS, and then press “7” to return to regular baking, or
press OFF to turn off the range.
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
11
Positioning Racks and Bakeware
7
6
5
4
3
2
1
A
B
IMPORTANT: To avoid permanent damage to the porcelain finish,
do not place food or bakeware directly on the oven door or bottom.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow
(5 cm) of space around bakeware and oven walls. Make sure
2"
that no bakeware piece is directly over another.
Racks
■ Position racks before turning on the oven.
■ Do not position racks with bakeware on them.
■ Make sure racks are level.
To position a rack, pull it out to the stop position, raise the front
edge, and then lift out. Use the following illustration and charts as a
guide.
The oven has 7 positions for a flat rack, as shown in the previous
illustration and the following table.
Flat Rack Position Type of Food
7 Broiling/searing meats, hamburgers,
6 Broiled meats, poultry, fish
3 or 4 Most baked goods, casseroles
2 Roasted meats
1 Large roasts or poultry
steaks
IMPORTANT: These rack positions are for flat racks. If a Max
Capacity Rack is used, the rack position must be adjusted as
shown in the previous figure.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 5 for regular baking.
2-rack (convection only): Use rack positions 2 and 5.
3-rack (true convection only): Use rack positions 2, 4 and 6.
Baking Cookies and Layer Cakes on 2 Racks
Baking Layer Cakes
For best results when baking cakes on 2 racks, use racks 2 and 5
with the Bake function. Place the cakes on the racks as shown.
Baking Cookies
For best results baking 2 racks of cookies, use racks 2 and 5 with
Convect Bake.
Oven Vent
For hamburger patties to have a well-seared exterior and a rare
interior, use a flat rack in rack position
7. Side 1 should cook for
approximately 2¹⁄₂ to 3¹⁄₂ minutes. Side 2 should cook for
approximately 4 to 5 minutes. Expect a moderate degree of smoke
when broiling.
IMPORTANT: If your model has a Max Capacity Rack, the
recessed ends must be placed in the rack position above the
desired position of the food. See the following illustration.
A. Ends of rack in position 3
B. Food in position 2
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering the oven
vent will cause poor air circulation, affecting cooking and cleaning
results. Do not set plastics, paper or other items that could melt or
burn near the oven vent.
12
Baking and Roasting
Preheating
When beginning a Bake, Convect Bake or Convect Roast cycle, the
oven will begin preheating after Start is pressed.
approximately 12 to 15 minutes to reach
the oven racks provided with your oven inside the oven cavity.
Higher temperatures will take longer to preheat. The preheat cycle
rapidly increases the oven temperature. The actual oven
temperature will go above your set temperature to offset the heat
lost when your oven door is opened to insert food. This ensures that
when you place your food in the oven, the oven will begin at the
proper temperature. Insert your food when the preheat tone sounds.
Do not open the door during preheat before the tone sounds.
The oven will take
350°F (177°C)
with all of
Oven Temperature
While in use, the oven elements will cycle on and off as needed to
maintain a consistent temperature, but they may run slightly hot or
cool at any point in time due to this cycling. Opening the oven door
while in use will release the hot air and cool the oven which could
impact the cooking time and performance. It is recommended to
use the oven light to monitor cooking progress.
NOTE: On models with convection, the convection fan may run in
the non-convection bake mode to improve oven performance.
Temperature Management System
The Temperature Management System electronically regulates the
oven heat levels during preheat and bake to maintain a precise
temperature range for optimal cooking results. The bake and broil
elements or burners cycle on and off in intervals. On convection
range models, the fan will run while preheating and may be cycled
on and off for short intervals during Bake to provide the best
results. This feature is automatically activated when the oven is in
use.
Before baking and roasting, position racks according to the
“Positioning Racks and Bakeware” section. When roasting, it is not
necessary to wait for the oven preheat cycle to end before putting
food in unless it is recommended in the recipe.
Broiling
Leave the door open 6" (15 cm) at the broil stop position to ensure
proper broiling temperature. Preheat the oven for 5 minutes before
putting food in unless recommended otherwise in the recipe.
Position food on grid in a broiler pan, and then place it in the center
of the oven rack.
Convection Cooking
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air helps maintain a
consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture and yielding
crustier breads.
During convection cooking, the bake, broil and convection (true
convection only) elements cycle on and off in intervals to maintain
the oven temperature, while the fan circulates the hot air.
If the oven door is opened during convection cooking, the fan will
turn off immediately. It will come back on when the oven door is
closed.
NOTE: The oven door must be closed for convection broiling.
Position the racks according to the “Positioning Racks and
Bakeware” section before starting convection cooking.
With convection cooking, most foods can be cooked at a lower
temperature for a shorter length of time. These adjustments can be
made using the following chart or by using the EasyConvect™
Conversion feature on your range.
Setting Guidelines
CONVECT
BAKE
CONVECT
ROAST
Reduce the standard baking temperature 25°F
(15°C).
Use standard recipe temperature. Cooking time
may be reduced by 15% to 30% with Convect
Roast so the food should be checked for
doneness early.
NOTE: Odors and smoke are normal the first few times the oven is
used or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish
and poultry may cook better at lower broil settings. Use racks 6 or
7 for broiling. Refer to the “Positioning Racks and Bakeware”
section for more information.
On lower settings, the broil element will cycle on and off to maintain
the proper temperature.
■ For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be ordered.
Please refer to the “Accessories” section for more information.
CONVECT
BROIL
Bow Tie True Convection with T.H.E.™ Element
True convection adds an electric element around the convection
fan to enhance the cooking performance. This feature enables
3-rack baking in your range. Use the following Convect Options
chart as a guide.
Convect Options
Setting Foods
CONVECT
BAKE
CONVECT
ROAST
CONVECT
BROIL
Use standard recipe temperature. Cooking time
may be reduced so the food should be checked
for doneness early.
Single or multiple-rack baking for cookies,
biscuits, breads, casseroles, tarts, tortes.
Whole chicken or turkey, vegetables, pork
roasts, beef roasts.
Thicker cuts or unevenly shaped pieces of meat,
fish or poultry.
13
EasyConvect™ Conversion
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Convection cooking temperatures and times can differ from those
of standard cooking. Depending upon the selected category,
EasyConvect™ conversion automatically reduces the standard
recipe temperature and/or time you input for convection cooking.
Foods are grouped into 4 general categories. Choose the category
most appropriate for the food to be cooked. Use the following chart
as a guide.
Setting Foods
MEATS Chicken: whole and pieces
Meat loaf, Roasts: pork, beef and ham
(Turkey and large poultry are not included because
their cook time varies.)
BAKED
GOODS
PIZZA Fresh pizza, Frozen pizza
OTHER Frozen convenience foods: french fries,
Biscuits, Breads: quick and yeast
Cakes and Cookies
Casseroles
nuggets, fish sticks, lasagna
To U se :
NOTE: For best results, preheat your oven to the desired
temperature prior to using Easy Convect™ Conversion. After
preheating is complete, press OFF before using EasyConvect™
Conversion.
1. Press the EASY CONVECT key for the desired option (MEATS,
BAKED GOODS, PIZZA or OTHER).
2. Press START.
3. Press the number keys to enter standard cook temperature,
and then press START.
4. Press the number keys to enter standard cook time, and then
press START.
5. Place the food in the oven.
Check food for doneness before the stop time is reached. If
food will not be done when the stop time is reached, add more
cooking time before time elapses (see the “Cook Time”
section). At the end of the stop time, the oven will automatically
turn off.
6. Press OFF when finished.
7. Remove food from the oven.
Proofing Bread
Proofing bread prepares the dough for baking by activating the
yeast. Follow the recipe directions as a guide. Standard Proof
should be used for fresh dough, thawed dough, and for the first
and second rise. Rapid Proof (on some models) operates at a
slightly higher temperature than Standard Proof, and it can be used
for the second rise of formed dough.
To Proof:
Before first proofing, place the dough in a lightly greased bowl and
cover loosely with wax paper, coated with shortening. Place in
position 2, and then close the oven door.
1. Press BREAD PROOF until the desired proof is displayed
(“Standrd” or “Rapid”).
2. Press START.
Let the dough rise until nearly doubled in size. Proofing time
may vary depending on dough type and quantity.
3. Press OFF when finished proofing.
Before second proofing, shape the dough, place it in baking pan(s)
and then cover loosely. Follow the same placement and control
steps above. Before baking, remove the cover.
NOTE: If the oven temperature is greater than 120°F (49°C), the
display will indicate “Oven Cooling” until the temperature is below
120°F (49°C).
Cook Time
To Set a Timed Cook:
1. Press BAKE, CONVECT BAKE, CONVECT ROAST or
CONVECT BROIL.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
3. Press COOK TIME.
4. Press the number keypads to enter the length of time to cook.
5. Press START. The display will count down the time. When the
time ends, the oven will shut off automatically.
The temperature and/or time setting can be changed at any
time by repeating steps 2 through 5.
6. Press OFF to clear the display.
NOTE: The time setting for any timed cooking function,
including EasyConvect™ Conversion, can be adjusted by
following the previous steps 3 through 5.
To Set a Delayed Timed Cook:
1. Press DELAY START.
2. Press the number keypads to enter the number of hours and/or
minutes you want to delay the start time.
3. Press BAKE, CONVECT BAKE, CONVECT ROAST or
CONVECT BROIL.
4. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
5. Press START or COOK TIME.
6. Press number keypads to enter the length of time to cook.
7. Press START.
When the start time is reached, the oven will automatically turn on.
The temperature and/or time settings can be changed after the
delay countdown by repeating steps 1 through 7. When resetting
the time and temperature, it is necessary to press Start between
4 and 5 to continue making changes.
steps
When the set cook time ends, the oven will shut off automatically.
8. Press OFF to clear the display.
14
Loading...