Page 1
7
/8”
23
(60.72 cm)
UNDERCOUNTER REFRIGERATOR
Solid door KURR114KSB, KURL114KSB, KURR114KPA,
KURL114KPA
Glass door KURR314KSS, KURL314KSS, KURR314KBS,
KURL314KBS, KURR214KSB
Detailed Planning Dimensions Guide
Product Dimensions
Depth
(no handle)
3
34
/8”
(87.32 cm)
Add 5/8” (1.6 cm) to the height dimension
*
when leveling legs are fully extended.
For custom panel models, this will vary.
**
†
Add 1/4” (6.4 mm) to the height dimension
†
*
5
30
/8”
(77.75 cm)
**
9
3
/16”
(9 cm)
*
for height with hinge covers.
Variant Depth (no handle)
Panel ready models
(with 3/4” panel)
Stainless and
black stainless
13
/16” (60.7 cm)
23
5
23
/8” (60.2 cm)
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the
right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product.
Specifications subject to change without notice.
W11530525
1
Page 2
Dimension Description
Panel ready models
(with 3/4” panel)
Stainless and black
stainless models
A
B
Width of door
Width of the grille
C Height to top of handle
D
Width from side of refrigerator to
handle – door open 90°
E Depth without door
F Depth with door
G Depth with handle
H Depth with door open 90°
For custom panel models, this will vary.
**
A
233/4” (60.3 cm) 233/4” (60.3 cm)
13
23
/16” (60.5 cm) 2313/16” (60.5 cm)
**
**
11
/16” (55.1 cm) 2111/16” (55.1 cm)
21
13
/16” (60.7 cm)
23
**
311/8” (78.85 cm)
21/3” (5.95 cm)
5
/8” (60.2 cm)
23
7
26
/16” (67.15 cm)
4715/16” (121.8 cm) 4715/16” (121.8 cm)
E
F
G
H
C
D
Front
view
Side view
B
3
22
/8”
(56.8 cm)
Top view
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the
right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product.
Specifications subject to change without notice.
2
Page 3
Opening Dimensions
1
34
/2” (87.6 cm)
35” (88.9 cm)
min
max
.
24”
(60.96 cm)
min
Electrical Requirements
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
24”
(60.96 cm)
min
NOTE: Make sure there is 3” (7.6 cm) space between
refrigerator and adjacent appliance/wall for door swing.
Electrical Supply Location
Lighter grey area indicates recommended recessed
power outlet (located behind the refrigerator).
Power cord length is 5 ft (152.4 cm).
For fl ush
installation,
the power
outlet can
be installed
in adjacent
cabinetry with
a cutout on the
power cord
side for routing
of the power
cord.
A
C
F
A
E
B
F
Back wall
Recessed
receptacle
locations
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
A 115 V, 60 Hz, AC only, 15 A or 20 A fused, grounded
electrical supply is required. It is recommended that a
separate circuit serving only your refrigerator be
provided.
Use an outlet that cannot be turned off by a switch.
Do not use an extension cord.
Location Requirements
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from the refrigerator.
Failure to do so can result in death, explosion, or fire.
D
For the refrigerator to be fl ush with the front of the base
cabinets, remove any baseboards or moldings from the
A
3” (7.55 cm)
1
4
B
1
9
C
/2” (11.37 cm)
/4” (23.47 cm)
Dimensions
D
E
F
121/16” (30.64 cm)
3
/4” (55.16 cm)
21
3
1
/4” (4.44 cm)
rear of the opening.
Flooring under product must be at the same level as
the room. If the fl oor of the opening is not level with the
kitchen fl oor, shim the opening to make it level with the
kitchen fl oor.
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the
right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product.
Specifications subject to change without notice.
3
Page 4
Wood Panel Guide
CAUTION: Installation of door panels with less than
a 3/8” (0.95 cm) gap between the door panel and
the adjacent cabinet increases the risk of potential
pinching.
IMPORTANT:
The graphics in following sections show a custom
panel for a door with the hinges installed on the
right-hand side.
If your refrigerator has the hinges installed on the left-
hand side, rotate the custom frame 180° so the hinge
markings will be on the left.
Panel dimensions shown are the minimum size to
cover the appliance door.
Panels can be made taller/ wider to match
surrounding cabinetry.
The recommended thickness of the overlay panel is
3/4” (19 mm).
Custom solid door overlay panel must not weigh
more than 20 lbs (9.07 kg).
Custom glass door overlay panel must not weigh
more than 10 lbs (4.54 kg).
Overlay panels weighing more than recommended
may cause damage to your appliance.
Solid door overlay panel
1/4"
(7 mm)
15
/16”
1/2"
4
(125 mm)
1/8"
(3 mm)
(12 mm)
Solid door overlay
panel and hinge
routing dimensions.
2"
(53 mm)
23
(60.3 cm)
Glass door overlay panel
1/4"
(7 mm)
15
/16”
1/8"
(3 mm)
(12 mm)
3
/4”
5
/8”
30
(77.75 cm)
Glass door
4
(125 mm)
1/2"
overlay panel
and hinge routing
2"
(53 mm)
(60.3 cm)
17
(43.3 cm)
13
/16”
21
(55.4 cm)
23
1
3
/16”
/4”
5
30
/8”
(77.75 cm)
dimensions.
W11530525 12/2020
®
/™ ©2020 All rights reserved. Used under license in Canada.
4
Loading...