KitchenAid KSBC1B2BM, KSBC1B2CU Owner's Manual

KSBC1B2

W11341965A.indd 1 16/05/2019 14:20:09

PARTS AND FEATURES

5 6

1 Ingredient cap with measuring cup 2 Lid 3 Blender jar 4 TalonTM blade 5 Power cord socket and removable

power cord (not shown)

6 Cord cleat (not shown):

To store the cord.

7 Base 8 On/off switch (not shown)

OU NC ES

8oz = 1Cup

9 Open handle for easy stackability 10 Removable blender jar pad 11 Control dial 12 Pulse toggle switch 13 Start/Stop toggle switch 14 Status indicator light 15 Tamper 16 Front cover with Handle 17 Back cover 18 Thumb Screw

W11341965A.indd 2 16/05/2019 14:20:10

ENGLISH

COMMERCIAL BLENDER SAFETY

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions.

2. To protect against risk of electrical shock, do not put Blender in water or other liquid.

3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.

4. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.

5. Avoid contact with moving parts.

6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact the manufacturer at their customer service telephone number for information on examination, repair or adjustment.

7. Do not use outdoors.

8. Do not let cord hang over edge of table or counter.

9. Keep hands and utensils, other than the tamper provided, out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. The cover must remain in place when using the tamper through the cover opening. A scraper may be used but must be used only when the blender is not running.

10. Blades are sharp. Handle carefully.

11. Always operate Blender with cover in place.

W11341965A.indd 3 16/05/2019 14:20:11

COMMERCIAL BLENDER SAFETY

12. The use of attachments, including canning blender jars, not recommended by KitchenAid may cause a risk of injury to persons.

13. Do not use appliance for other than intended use.

14. When blending hot liquids or ingredients, Ingredient Cap should remain in place over the lid opening. Always start on lowest speed and slowly ramp to desired speed when blending hot liquids or ingredients.

SAVE THESE INSTRUCTIONS

This product is designed for commercial use.

ELECTRICAL REQUIREMENTS

Voltage: 120 V Frequency: 60 HZ Amps: 15.0 A NOTE: If the plug does not fit in the

outlet, contact a qualified electrician. Do not modify the plug in any way. Do not use an adapter.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.

MOTOR HORSEPOWER

Motor horsepower for the blender motor was measured using a dynamometer, a machine that laboratories routinely use to measure the mechanical power of motors. Our 3.0 peak horsepower (HP) motor reference reflects the horsepower output of the motor itself and not the Blender’s horsepower output in the blender jar. As with any blender, the power output in the jar is not the same as the horsepower of the motor itself.

W11341965A.indd 4 16/05/2019 14:20:12

ENGLISH

GETTING STARTED

First, clean all parts and accessories (see “Care and Cleaning” section). Place the blender in a dry and clean area.

BLENDER FUNCTION GUIDE

The Blender has a preset recipe program: Icy Drinks, Variable speeds, and Pulse functions.

Setting Description

Icy

Drinks

Low

Med

High

Pulse

H/L

Variable

Times

Incorporates icy drink ingredients at low speed, then ramps up to high speed for a complete blend.

The Blender will run on low speed until the Start/stop is pressed, or will stop after 6 minutes.

The Blender will run on medium speed until the Start/stop is pressed, or will stop after 6 minutes.

The Blender will run on high speed until the Start/stop is pressed, or will stop after 6 minutes.

Use Pulse during manual operation to add a boost of power.

Starts at a slow speed and ramps up to a high speed for optimal blending results.

PRODUCT ASSEMBLY

Blending

Time

(in min:sec)

0:22

N/A

0:05-0:60

Suggested Items to

Blend

Ice, whole fruits or

vegetables, or frozen

fruits. Drinks such as Margaritas, Daiquiris, and blended ice coffee drinks.

Install the back cover by aligning the tab on the rear side of the base with the slot on the back cover.

W11341965A.indd 5 16/05/2019 14:20:13

Secure both sides over the tabs on the either side of the blender base.

GETTING STARTED

Install and secure the thumb screws on both sides by hand.

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Secure the front cover to the back cover.

WARNING

Electrical Shock Hazard

Make sure the power switch is OFF. Securely attach the removable power cord into the back of blender. Plug the Blender into a grounded 3 prong outlet.

W11341965A.indd 6 16/05/2019 14:20:17

Flip the power switch to ON (I). The status indicator light will flash, indicating that the Blender is in Standby mode and ready to operate.

ENGLISH

USING THE COMMERCIAL BLENDER

OUN C ES

8oz = 1Cup

OUNC ES

8oz = 1Cup

OUNC ES

8oz = 1Cup

OUNC ES

8oz = 1Cup

OUNC ES

8oz = 1Cup

IMPORTANT : When moving your Blender, always close the Front cover and support/lift from the Blender base. Base will become disengaged from jar if carried by Blender jar or Blender jar handle only. Do not lift by the cover or cover handle.

OUN C ES

8oz = 1Cup

Add items (max. 60oz). Add liquids first, then soft foods, then leafy greens, and ice or frozen items last. Secure the lid.

Turn the control dial to your desired speed, time, or program.

Flip the START/STOP toggle switch up or down to start. See the “Blender function guide” for more details.

OUNC ES

8oz = 1Cup

OUNC ES

8oz = 1Cup

Open the front cover. Place the blender jar on the base, aligning with the jar pad. Close the Front cover.

Using the Tamper (optional): Open front cover. Remove the Ingredient cap only. Stir or press contents down towards the blade. When finished, replace the Ingredient cap before resuming blending.

Using the Pulse mode (optional): Press and hold the PULSE toggle switch up for a faster pulse, or down for a slower pulse.

W11341965A.indd 7 16/05/2019 14:20:23

NOTE: The Pulse function may also be used on its own as a separate blending function while the Blender is in Standby mode.

When finished, flip the START/STOP toggle switch up or down to stop.

Allow the Blender to completely stop before removing the lid or pouring out the blended ingredients.

NOTE: Icy Drink cycle and variable timer cycles will stop automatically at the completion of the cycle.

CARE AND CLEANING

OUN CES

8oz = 1Cup

OUN CES

8oz = 1Cup

OUN CES

8oz = 1Cup

OUNCE S

8oz = 1Cup

NOTE: Do not immerse the Blender base or cord in water. Do not use abrasive cleansers or scouring pads to avoid scratching.

Fill half of the jar with warm water and add 1 or 2 drops of dish-washing liquid. Secure the Lid and Ingredient Cap. Place the jar on the base. Close the front cover.

Unplug before cleaning. Wipe the base and the cord with a warm, damp cloth and dry with a soft cloth.

Rotate the control dial to 50 seconds. Flip the START/STOP toggle switch up or down. When the timer finishes, remove and empty contents and rinse with warm water and dry thoroughly.

Wash the blender jar, jar pad, lid, front cover, back cover, handle, and ingredient cap by hand with a damp cloth and warm soapy water; rinse with warm water, and dry with a soft cloth.

NOTE: Handle must be removed from the front cover prior to cleaning by removing the two screws inside the front cover.

SANITIZING THE BLENDER JAR

1. Remove all contents from the blender jar.

2. Fill ¾ of the jar with a sanitizing solution mix of 1.5 tsp. (7.4 mL) institutional or

household bleach in 60 oz (1.75 L) water. Place the lid, and securely place the blender jar onto the blender base.

3. Run the blender on the High Speed setting for 35 seconds.

4. Turn off to let the sanitizing mix sit in the blender jar for an additional 2 minutes.

5. Pour out the solution. Do not rinse the blender jar.

6. Place the lid on the blender jar. Make sure the empty blender jar is fully in place on

the blender base. Run the empty Blender for an additional 10 seconds. Do not rinse the jar after sanitizing.

7. Allow the blender jar to air dry.

W11341965A.indd 8 16/05/2019 14:20:27

ENGLISH

TROUBLESHOOTING GUIDE

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Problem Solution

Status indicator light is off while unit is plugged in and On/Off switch is in On position:

Status indicator light is flashing orange color:

Blender stops after continuously running for 6 minutes:

Blender stops while blending:

If the ingredients of a recipe aren’t blending:

Blender jar overflows:

Troubleshooting does not solve the problem:

After 10 minutes of no activity, the blender will go into Sleep mode. Flip START/STOP toggle switch up or down to bring the blender back into Standby mode.

Indicates error mode. This can be caused by: using a spatula or any other utensil that could obstruct the blade to freely spin, or having an ice cube or hard food in a location that locks up the blade.

Unplug the blender and remove the jar from the base, and clear the items. Place the jar back on the base, and then turn on the blender to continue regular use.

This is normal operation for variable speed functions. Refer to “Blender function guide” for details.

If blender stops prior to the completion of the selected function, contact an authorized service center for assistance.

An air pocket can be created around the blade causing the ingredients to miss the blade. Use the tamper to push ingredients down into the blade. Refer to “Using the commercial blender” section. For certain recipes, adding more liquid may also assist in incorporating the ingredients.

Unplug and remove the jar pad from the housing to make sure the base is fully dry. The control dial can be detached by pulling it off with force. Wipe dry, and then replace it back.

See the “Warranty and service” section. Contact an Authorized Service Center for assistance.

Do not return the Blender to the retailer – retailers do not provide service.

W11341965A.indd 9 16/05/2019 14:20:28

WARRANTY AND SERVICE

KITCHENAID® COMMERCIAL BLENDER WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, AND CANADA

This warranty extends to the purchaser and any succeeding owner for Commercial Blenders operated in the 50 United States, the District of Columbia, and Canada.

Length of Warranty: Two Year Full Warranty for Blender Base, Front cover,

KitchenAid Will Pay for Your Choice of:

KitchenAid Will Not Pay for:

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you speciﬁc legal rights and you may also have other rights which vary from state to state or province to province.

and Back cover and One Year Full Warranty for Blender Jar from date of purchase.

Hassle-Free Replacement of your Commercial Blender. See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-855-845-9684. OR The replacement parts and repair labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center. See the KitchenAid® Commercial Blender Warranty for Puerto Rico for details on how to arrange for service.

A. Damage resulting from accident, alteration,

misuse or abuse.

B. Replacement parts or repair labor costs for

Blender operated outside the 50 United States and District of Columbia.

C. Replacement of the jar or base unit due to

cosmetic issues.

W11341965A.indd 10 16/05/2019 14:20:28

ENGLISH

WARRANTY AND SERVICE

KITCHENAID® COMMERCIAL BLENDER BASE WARRANTY FOR PUERTO RICO

A limited two year warranty extends to the purchaser and any succeeding owner for Commercial Blender Bases operated in Puerto Rico. During the warranty period, all service must be handled by an Authorized KitchenAid Service Center. Please bring the Commercial Blender Base, or ship

it prepaid and insured, to the nearest Authorized Service Center. Call toll-free 1-855-845-9684 to learn the location of a Service Center near you. Your repaired Commercial Blender Base will be returned to you prepaid and insured.

HASSLE-FREE REPLACEMENT WARRANTY — 50 UNITED STATES AND DISTRICT OF COLUMBIA

We’re so conﬁdent the quality of our products meets the exacting standards of KitchenAid that, if your Commercial Blender Base should fail within the ﬁrst two years of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Commercial Blender Base returned to us. Your replacement unit will also be covered by our two year limited warranty. Please follow these instructions to receive this quality service.

If your Commercial Blender Base should fail within the ﬁrst two years of ownership, simply call our toll-free Customer eXperience Center at 1-855-845-9684 Monday through Friday, 8 a.m. to 8 p.m. (Eastern Time). Give the consultant your complete shipping address. (No P.O. Box numbers, please.)

When you receive your replacement Commercial Blender Base, use the carton and packing materials to pack up your original Commercial Blender Base.

HASSLE-FREE REPLACEMENT WARRANTY — CANADA

We’re so conﬁdent the quality of our products meets the exacting standards of the KitchenAid brand that, if your Commercial Blender Base should fail within the ﬁrst two years of ownership, KitchenAid Canada will replace your Commercial Blender Base with an identical or comparable replacement. Your replacement unit will also be covered by our two year limited warranty. Please follow these instructions to receive this quality service.

If your Commercial Blender Base should fail within the ﬁrst two years of ownership, take the Commercial Blender Base or ship collect to an Authorized KitchenAid

Service Centre. In the carton include your name and complete shipping address along with a copy of the proof of purchase (register receipt, credit card slip, etc.). Your replacement Commercial Blender Base will be returned prepaid and insured. If you are unable to obtain satisfactory service in this manner call our toll-free Customer eXperience Centre at 1-800-807-6777.

Or write to us at: Customer eXperience Centre KitchenAid Canada 200 - 6750 Century Ave. Mississauga, ON L5N 0B7

W11341965A.indd 11 16/05/2019 14:20:28

WARRANTY AND SERVICE

KITCHENAID® COMMERCIAL BLENDER JAR WARRANTY FOR PUERTO RICO

A limited one year warranty extends to the purchaser and any succeeding owner for Commercial Blender Jars operated in Puerto Rico. During the warranty period, all service must be handled by an Authorized KitchenAid Service Center. Please bring the Commercial Blender

Jar, or ship it prepaid and insured, to the nearest Authorized Service Center. Call toll-free 1-855-845-9684 to learn the location of a Service Center near you. Your repaired Commercial Blender Jar will be returned to you prepaid and insured.

HASSLE-FREE REPLACEMENT WARRANTY — 50 UNITED STATES AND DISTRICT OF COLUMBIA

We’re so conﬁdent the quality of our products meets the exacting standards of KitchenAid that, if your Commercial Blender Jar should fail within the ﬁrst one year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Commercial Blender Jar returned to us. Your replacement unit will also be covered by our one year limited warranty. Please follow these instructions to receive this quality service.

If your Commercial Blender Jar should fail within the ﬁrst one year of ownership, simply call our toll-free Customer eXperience Center at 1-855-845-9684 Monday through Friday, 8 a.m. to 8 p.m. (Eastern Time). Give the consultant your complete shipping address. (No P.O. Box numbers, please.)

When you receive your replacement Commercial Blender Jar, use the carton and packing materials to pack up your original Commercial Blender Jar.

HASSLE-FREE REPLACEMENT WARRANTY – CANADA

We’re so conﬁdent the quality of our products meets the exacting standards of the KitchenAid brand that, if your Commercial Blender Jar should fail within the ﬁrst one year of ownership, KitchenAid Canada will replace your Commercial Blender Jar with an identical or comparable replacement. Your replacement unit will also be covered by our one year limited warranty. Please follow these instructions to receive this quality service.

If your Commercial Blender Jar should fail within the ﬁrst one year of ownership, take the Commercial Blender Jar or ship

collect to an Authorized KitchenAid Service Centre. In the carton include your name and complete shipping address along with a copy of the proof of purchase (register receipt, credit card slip, etc.). Your replacement Commercial Blender Jar will be returned prepaid and insured. If you are unable to obtain satisfactory service in this manner call our toll-free Customer eXperience Centre at 1-800-807-6777.

Or write to us at: Customer eXperience Centre KitchenAid Canada 200 - 6750 Century Ave. Mississauga, ON L5N 0B7

W11341965A.indd 12 16/05/2019 14:20:28

+ 28 hidden pages