KitchenAid KSB755OB0, KSB755CS0, KSB755CA0, KSB755ACS0 Owner’s Manual
KitchenAid °
SPEED
VITESSE
VELOCIDAD
BLENDER
INSTRUCTIONS
MI_LANGEUR
INSTRUCTIONS
LICUADORA
INSTRUCClONES
KSB655 / KSB755
USA: 1-800-541-6390
Canada: 1-800-807-6777
E
KitchenAid.com
KitchenAid.ca
FOR THE WAY IT'S MADE?
Proof of Purchase & Product Registration
Always keep a copy of the salesreceipt
showing the date of purchase of your
Blender. Proof of purchase will assure you
of in-warranty service.
Before you use your Blender, please fill out
and mail your product registration card
packed with the unit. This card will enable
Model Number
Serial Number
Date Purchased
Store Name and Location
us to contact you in the unlikely event of
a product safety notification and assist us
in complying with the provisions of the
Consumer Product Safety Act. This card
does not verify your warranty.
Pleasecomplete the following for your
personal records:
Preuve d'achat et enregistrement du produit
Veuillez conserver une copie du coupon de
caisseindiquant la date d'achat de votre
m61angeun La preuve d'achat vous assure
du service d'apr6s-vente sous garantie.
Avant d'utiliser votre m61angeur,veuillez
remplir et poster la carte d'enregistrement
du produit accompagnant I'appareil.
Grace _ cette carte, nous pourrons vous
Num@o de mod61e
Num@o de s@ie
Date d'achat
Nom du marchand et adresse
appeler dans 1'6ventualit6 improbable d'un
avis de s6curit6 et nous conformer plus
facilement aux dispositions de la Ioi sur la
s6curit6 des produits de consommation.
Cette carte ne confirme pas votre garantie.
Veuillez remplir ce qui suit pour vos
dossiers personnels :
Comprobante de compra y registro del producto
Siempre conserve una copia del recibo
de ventas que especifique la fecha de
compra de su licuadora. El comprobante
de compra le asegurar_ el servicio t6cnico
bajo garantfa.
Antes de utilizar la licuadora, complete y
envfe por correo su tarjeta de registro del
producto que viene junto con la unidad.
Esta tarjeta nos permitir& contactarnos
N0mero del modelo
N0mero de serie
Fecha de compra
Nombre de la tienda y direcci6n
con usted en el improbable caso de
una notificaci6n de alg0n problema de
seguridad con el producto y nos ayudar& a
cumplir con las cl&usulas de la Consumer
Product Safety Act (Ley sobre la seguridad
de los productos para el consumidor). Esta
tarjeta no asegura su garant[a.
Complete Io siguiente para su
registro personal:
Table of Contents
INTRODUCTION
Proof of Purchase & Product Registration Card...................................... Inside Front Cover
Blender Safety................................................................................................................. 3
Important Safeguards ..................................................................................................... 4
Electrical Requirements ................................................................................................... 5
FEATURESAND OPERATION
Blender Features ............................................................................................................. 6
Preparing the Blender for Use......................................................................................... 8
Before First Use ....................................................................................................... 8
Blender Assembly .................................................................................................... 8
Using the Blender ......................................................................................................... 10
Before Use............................................................................................................. 10
Operating the Blender ........................................................................................... 10
CRUSHICE............................................................................................................. 10
PULSEMODE......................................................................................................... 11
Ingredient Cup ...................................................................................................... 11
Drizzle Cap............................................................................................................ 11
Soft Start _Blending Feature................................................................................... 11
Speed Control Guide ..................................................................................................... 12
CAREAND CLEANING
ToClean Individual Components ................................................................................... 13
ToClean Without Disassembly ...................................................................................... 13
Troubleshooting ............................................................................................................ 14
BLENDERTIPS
Quick Tips ............................................................................................................. 15
How To.................................................................................................................. 15
Continued on next page
Table of Contents
WARRANTYAND SERVICEINFORMATION
KitchenAid RBlender Warranty ....................................................................................... 17
Hassle-FreeReplacement Warranty BOUnited States and District of Columbia ........... 18
Hassle-FreeReplacement Warranty Canada ................................................................ 18
How to Arrange for Warranty Servicein Puerto Rico ..................................................... 18
How to Arrange for Service after the Warranty Expires All Locations .......................... 19
How to Arrange for Service Outside these Locations ..................................................... 19
How to Order Accessories and Replacement Parts......................................................... 19
NOTE: DUE TO THE UNIQUE CONTAINER AND BLADE DESIGN, READ THESE
INSTRUCTIONS BEFORE USING YOUR NEW KITCHENAID _ BLENDER TO ACHIEVE
MAXIMUM PERFORMANCE RESULTS.
Blender Safety
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you
and others.
All safety messages will follow the safety alert symbol and either
the word "DANGER" or "WARNING." These words mean:
You can be killed or seriously injured
if you don't immediately follow
instructions.
Youcan be killed or seriously injured
if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to
reduce the chance of injury, and tell you what can happen if the instructions are
not followed.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and/or injury to persons including the following:
1. Read all instructions.
2. To protect against risk of electrical shock, do not put Blender in water or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
5. Avoid contact with moving parts.
6. Do not operate the Blender with a damaged cord or plug or after appliance malfunctions,
or is dropped or damaged in any mannen Return appliance to the nearest Authorized
Service Center for examination, repair or electrical or mechanical adjustment.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter.
9. Keep hands and utensils out of container while blending to reduce the risk of severe
injury to persons or damage to the Blenden A scraper may be used but must be used
only when the Blender is not running.
10. Blade assembly is sharp. Handle carefully.
11. To reduce risk of injury, never put locking collar and blade assembly on the base
without having the pitcher or accessory jar properly attached.
12. Always operate Blender with cover in place.
13. The use of attachments, including canning jars, not recommended by KitchenAid may
cause a risk of injury to persons.
14. When blending hot liquids, remove center piece of two-piece cover.
15. This product is designed for household use only.
SAVE THESE INSTRUCTIONS
Electrical Requirements
Volts: 120 Volts A.C. only.
Hertz: 60 Hz
NOTE: Your Blender has a 3-prong
grounded plug. To reduce the risk of
electrical shock, this plug will fit in an
outlet only one way. If the plug does not fit
in the outlet, contact a qualified electrician.
Do not modify the plug in any way.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or serviceman install
an outlet near the appliance.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
Stay-Put Lid with
Clear, 2 oz. (60 ml)
Ingredient Cup
Easy Pour
48 oz. (1.5 L)
Glass Pitcher
Patented
Stainless
Steel Blade
Locking Collar
and Blade
Assembly
Blender Features
24 oz. (0.75 L)
Accessory Jar*
Accessory
Jar Lid with
Drizzle Cap*
Durable
Steel-Reinforced
Coupler
Die-Cast
Metal Base
* Model KSB755only
Speed
Selection
Buttons
Clean Touch TM
Control Pad
Blender Features
This blender was built and tested to
KitchenAid quality standards for optimum
performance and long, trouble-free life.
Robust Motor
Rugged 0.9-horsepower motor supplies
the power for superb performance with
all blending tasks from pur6eing sauces
to making chunky salsas, or uniformly
crushing a pitcher of ice or frozen fruit
within seconds for silky smoothies.
Easy Pour 48 oz. (1.5 L) Glass Pitcher
GlassPitcher resists scratches, stains and
odors. Pitcher isremovable from locking
collar for easy cleaning, and withstands a
range of extreme temperatures. Easypour
spout provides smooth, drip-free pouring.
Stay-Put Lid with Clear 2 oz. (60 ml)
Ingredient Cup
Providesa strong seal. The flexible lid will
maintain its tight seal throughout the
life of the Blender. The lid incorporates
a removable 2 oz. (60 ml) cup for
convenience in measuring and adding
ingredients. The ingredient cup is
interchangeable with the drizzle cap on
the accessoryjar lid (model KSB7BB).
24 oz. (0.75 L) Shatter-Resistant
Accessory Jar (Model KSB755)
Durable accessory jar is useful for small
capacity recipes and individual servings.
Accessory Jar Lid with Drizzle Cap
(Model KSB755)
The lid includes a removable drizzle cap
that fits both the accessoryjar and pitcher
lids. This versatile cap can be used to
drizzle oils or other ingredients while the
blender is in operation.
Patented Stainless Steel Blade
Sharp over-sized tines are positioned on
four different planes for fast, thorough
and consistent blending.
Locking Collar and Blade Assembly
Durable, one-piece blade design is built
into the locking collar for easy handling
and cleaning. Dishwasher-safe assembly
keeps the blades from rotating until the
pitcher or accessoryjar is properly attached
to the collar and put on the Blender base.
Durable Steel-Reinforced Coupler
Commercial-quality coupler with 12
interlocking teeth provide direct transfer
of motor power to the blades. Pitcher
coupler is coated for quiet operation.
Speed Selection Buttons
Create frozen drinks and pur6e sauces or
soups in seconds. Blend with confidence,
control and consistency at all speed settings:
STIR,CHOP,MIX, PUREEand LIQUEF_The
PULSEMODE works with all five speeds.The
CRUSHICEfeature is designed specifically
for crushing ice and will automatically pulse
at staggered intervals for optimal results.
Intelli-Speed _'Motor Control
ExclusiveIntelli-Speed_control automatically
works to keep speed constant even
through density changes when ingredients
are added. This advanced KitchenAid design
maintains an optimal blending speed for
each culinary task and control-pad setting.
Soft Start '°'Blending Feature
The Blender starts at a slower speed to
pull ingredients into the blade then quickly
increases to selected speed setting. This
design feature reduces start-up kick and
allows hands-free operation.
Die-Cast Metal Base
Heavy, die-cast metal base ensures stable,
quiet operation when blending a full
pitcher of ingredients. Four rubber feet on
wide, solid base provide a no-slip, non-
marring grip. Smooth and rounded, the
base is easy-to-dean and features cord
storage underneath.
Clean Touch 'MControl Pad
Wipes clean in an instant. Smooth control pad
has no crevicesor cracksto trap ingredients.
Preparing the Blender for Use
Before First Use
Beforeusing your Blenderfor the first time,
wipe Blender basewith a warm sudsycloth,
then wipe cleanwith a damp cloth. Dry with
a soft cloth. Wash pitcher,accessoryjar, lid(s),
locking collar and blade assembly,sealing
ring, ingredient cup and drizzle cap in warm,
sudsywater (seeCareand Cleaning, page
13). Rinseparts and wipe dry.
Blender Assembly
1. Put locking collar with blade assembly
pointing up on a sturdy surface.
2,
Put sealing ring, flat side down, around
the blades and into the groove within
the locking collar.
Sealing
_ing
4,
Pressdown and rotate pitcher or
accessory jar clockwise, approximately
1/4turn until two clicks are heard.
5. Adjust the length of the Blender
power cord.
6. Put pitcher or accessoryjar assembly
onto the Blender base.
•Locking
Collar
3. Align the pitcher or accessoryjar tabs
with the slots of the locking collar.
Preparing the Blender for Use
NOTE: When properly positioned,
pitcher or accessory jar assembly will rest
completely on Blender base. If not, repeat
steps 3 and 4.
No
Gap
7. Put lid on pitcher or accessoryjar.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
9. Before removing the pitcher or
accessory jar from the base, always
press OFF and unplug the power cord.
8. Plug power cord into a grounded
3-prong outlet. Blender is now ready
for operation.
Using the Blender
Before Use
NOTE: While the Blender is on or the
PULSEMODE indicator light is blinking:
- Do not interfere with blade movement
- Do not remove pitcher or accessoryjar lid
Operating the Blender
The KitchenAid _ Blender has five speeds:
STIR,CHOP,MIX, PUREEand LIQUEFY.In
addition, it also features CRUSH ICEand
PULSEMODE.
1. With convenient one-step operation,
this unit will operate only when a
speed selection button is pressed.
2. Before operating the Blender, make
sure the pitcher or accessory jar is
properly secured in the locking collar
and assembly is positioned on the
Blender base.
No
lap
4. Pressthe desired speed button for
continuous operation at that speed.
The red indicator light above the
selected speed will stay lit. You may
change settings without stopping the
unit by pressing a new speed button.
IMPORTANT: If blending hot foods or
liquids, remove the center ingredient cup.
Operate only on STIRspeed.
B. Toturn off the Blender, press OFR
The Off button will stop any speed
and deactivate the Blender at the
same time.
6. Before removing the pitcher or
accessoryjar assembly, unplug the
power cord.
CRUSH ICE
Your KitchenAid '_ Blender offers a CRUSH
ICEfeature. When selected, the Blender
will automatically pulse at staggered
intervals at the optimal speed for crushing
ice or other ingredients.
1. Before operating the Blender, make
sure the pitcher or accessoryjar
assembly is properly positioned on the
Blender base.
NOTE: If a gap exists between the
locking collar and the base, the pitcher or
accessoryjar might not be locked into the
locking collar or the collar is not positioned
properly on the Blender base. See Blender
Assembly, page 8 for further instructions.
2. Put ingredients into the pitcher or
accessoryjar and firmly attach lid.
3. PressCRUSHICE.The indicator light will
stay lit. The Blender will automatically
pulse at staggered intervals.
NOTE: If a gap exists between the
locking collar and the base, the pitcher
or accessoryjar might not be locked into
the locking collar or the assembly is not
positioned properly on the Blender base.
See Blender Assembly, page 8 for further
instructions.
3. Put ingredients into the pitcher or
accessoryjar and firmly attach lid.
10
Using the Blender
4. Toturn off the CRUSHICEfeature
press OFE The Blender is now ready for
continuous operation.
5. Beforeremoving the pitcher or accessory
jar assembly,unplug the power cord.
PULSE MODE
Your KitchenAid _ Blender offers PULSE
MODE, which allows a "Pulse-at-any
Speed" feature.
NOTE: PULSEMODE will not work with
the CRUSHICEfeature.
1. Before operating the Blender, make
sure the pitcher or accessoryjar
assembly is properly positioned on the
Blender base.
NOTE: If a gap exists between the
locking collar and the base, the pitcher
or accessoryjar might not be locked
into the locking collar or the collar is not
positioned properly on the Blender base.
See Blender Assembly on page 8 for
further instructions.
2. Put ingredients into pitcher or
accessoryjar, and firmly attach lid.
3. PressPULSEMODE. The indicator light on
the button will blink to indicate that all
five speedsare in the PULSEMODE.
4,
Select a speed button. Pressand hold
for the desired length of time. Both
the speed button and PULSEMODE
indicators will stay lit when pulsing
at the selected speed. When button
is released, the blending will stop,
but the Blender will remain in PULSE
MODE and the PULSEMODE indicator
will return to blinking. To pulse again
or at another speed, simply press and
hold the button of the desired speed.
5. Toturn off the PULSEMODE feature,
press OFRThe Blender is now ready for
continuous operation.
6. Before removing the pitcher or
accessoryjar assembly,unplug the
power cord.
Ingredient Cup
The 2 oz. (60 ml)
ingredient cup can be
used to measure and add
ingredients to both the
pitcher and the accessory jar. Remove cup
and add ingredients at STIR, CHOP or MIX
speeds. When operating at higher speeds,
with a full pitcher or with hot contents,
stop the Blender and then add ingredients.
Drizzle Cap (Model KSB755)
This versatile cap fits into
both the pitcher and
accessoryjar lid and is
used to drizzle oils or
other liquids while the
blender is in operation.
Soft Start '°_Blending Feature
The Soft Start Rblending feature
automatically starts the Blender at a slower
speed to pull ingredients into the blade
then quickly increases to selected speed
setting for optimal performance.
NOTE: The Soft Start _ blending feature
only works when a speed is selected from
the OFF mode and does not work with the
PULSE MODE or CRUSH ICE features.
11
Speed Control Guide
Item Speed
Blended ice drink ............. Liquefy
Cheesecake.................. Liquefy
Chopped fruits ........... Pulseon Stir
Chopped vegetables ....... Pulseon Stir
Cream cheese-based spread ........ Stir
Cream soup .................... Stir
Crushed/chopped Ice ......... Crush Ice
Dip ........................... Stir
Fruit-based sauce ................ Stir
Grated hard cheese............ Liquefy
Gravy ......................... Mix
Oatmeal ...................... Puree
Pancakebatter .................. Mix
Pesto......................... Chop
Pureed fruit/Baby food ........... Puree
Pureed meat/Baby food meat ...... Puree
Pureed vegetables/
Baby food vegetables .......... Puree
Vegetable-based
main dish sauce ............... Stir
Waffle batter ................... Mix
Finelychopped fresh fruits ..... Crush Ice
Finely chopped
fresh vegetables ............ Liquefy
Frozen chopped fruit
(defrost slightly until
it can be probed
with a knife tip) ........... Crush Ice
Frozen yogurt-based drink ...... Liquefy
Fruit juice from
frozen concentrate ............. Mix
Fruit-based drink (Thin) ......... Liquefy
Fruit-based drink (Thick) ........... Stir
Ice milk-based drink ........... Liquefy
Meat salad for
sandwich filling ........ Pulseon Chop
Mousse ..................... Liquefy
Salad dressing ................... Mix
Savory crumb topping .... Pulseon Chop
Sherbet-based drink ........... Liquefy
Smooth ricotta or
cottage cheese ................ Mix
Streusel topping ................ Chop
Sweet crumb topping .... Pulseon Chop
Sweet crunch topping ..... Pulseon Chop
White sauce .................... Stir
Tip - Processup to one standard ice cube tray or 12 to 14 standard ice cubes at a
time. Occasional stirring with a spatula will be helpful only when Blender is off. The
CRUSHICEfeature has been optimized to crush and chop ice without adding any liquid
ingredients.
12
Care and Cleaning
The Blender pitcher, accessory jar, locking
collar and blade assembly can be easily
cleaned as individual components or
together without disassembly.
° Clean the Blender thoroughly after
every use
° Do not immerse the Blender base or
cord in water
° Do not use abrasive cleansers or
scouring pads
To Clean Individual Components
1. Lift the pitcher or accessory jar
assembly in a straight, upwards motion
off the Blender base. Then, while
holding locking collar, rotate pitcher
or accessory jar counterclockwise, two
clicks, to separate locking collar and
blade assembly, and sealing ring from
the pitcher or accessory jar. Wash
components with soapy water. Rinse
and wipe dry.
NOTE: Pitcher can be placed in the
bottom rack of an automatic dishwasher.
The accessory jar, both lid(s), ingredient
cup, drizzle cap, locking collar and blade
assembly, and sealing ring can be put
in the top rack. For best results, hand
washing is recommended.
To Clean Without Disassembly
1. Put the pitcher or accessory jar on the
Blender base, fill half full with warm
(not hot) water, and add 1 or 2 drops
of dishwashing liquid. Put the lid
on the pitcher or accessory jar, press
the STIR speed setting, and run the
Blender for 5 to 10 seconds. Remove
the pitcher or accessory jar and empty
contents. Rinse with warm water
until clean.
2. To clean the lid(s), ingredient cup and
drizzle cap, wash in warm soapy water,
then rinse and dry thoroughly.
3. Wipe the Blender base and cord with
a warm, sudsy cloth; wipe clean with a
damp cloth, and dry with a soft cloth.
/
Pitcher --
Sealing
Ring
Locking
Collar --
and Blade
Assembly
2.
Wipe the Blender base and cord with
a warm, sudsy cloth; wipe clean with a
damp cloth, and dry with a soft cloth.
!
13
Troubleshooting
The Blender does not operate when a setting is selected:
Check to see if the Blender is plugged
into a grounded 3-prong outlet. If it
is, press OFF,then unplug the Blender.
Plug it back into the same outlet. If the
Blender still does not work, check the
fuse or circuit breaker on the electrical
circuit the Blender is connected to and
No indicator lights are lit.
The Blender stops while blending:
All indicator lights are flashing
at the same time.
Indicator lights are flashing alternately.
The Blender turns on, but blades will not rotate:
make sure the circuit isclosed.
The Blender may be overloaded. If the
Blenderbecomes overloaded when
blending heavy ingredients, it will
automatically shut off to avoid damage to
the moton PressOFFto reset the Blender
and unplug the power cord. Removethe
pitcher or accessoryjar assemblyfrom
the base and divide contents into smaller
batches. Adding liquid to the ingredients
may also reducethe load on the Blender.
The Blender may be jammed. If it's
jammed, the Blender will stop running to
avoid damage to the motor. PressOFFto
reset the Blenderand unplug the power
cord. Removethe pitcher or accessory
jar assembly from the base and with a
scraper,free the blades by breaking-up or
removing the contents at the bottom of
the pitcher or accessoryjar.
The pitcher or accessoryjar is not properly
secured in the locking collar, not allowing
couplers to engage. Remove pitcher
from base and fully seat into collar. Press
down and rotate pitcher or accessoryjar
clockwise in the locking collar past the
second "click." This will allow the pitcher
assembly or accessoryjar to engage the
coupler. Seepage 8 for Blender Assembly.
If the problem cannot be fixed with the steps provided in this section, contact KitchenAid
or an Authorized KitchenAid Service Center.
USA/Puerto Rico: Canada: Mexico:
1-800-541-6390 1-800-807-6777 01-800-024-17-17 (JV Distribuciones)
01-800-902-31-00 (Industrias Birtman)
See the KitchenAid Warranty and Service section on page 17 for additional details.
Do not return the Blender to the retailer they do not provide service.
14
Blender Tips
Quick Tips
° In order to produce a smoother texture,
blend with CRUSHICE if you're making
beverages using ice.
° Smaller ice cubes can be chopped or
crushed faster than large ones.
° Add food to this Blender pitcher in
larger quantities than you would with
other blenders - you can add 2 to 3
cups (475 to 710 ml) at a time versus 1
cup (235 ml) portions.
° For many ingredient mixtures, start the
blending process at STIRto thoroughly
combine the ingredients. Then increase
to a higher speed, if necessary.
° Be sure to keep lid on pitcher or
accessoryjar while blending.
° If desired, remove center ingredient cup
or drizzle cap of the pitcher or accessory
jar lid to add liquids or ice cubes while
the Blender is operating on STIR,CHOP
or MIX speeds.
° When operating at higher speeds with a
full pitcher or accessoryjar or with hot
contents, stop the Blender and then add
ingredients.
° Stop the Blender before using utensils in
the pitcher or accessory jar. Use a rubber
spatula to mix ingredients only when
the Blender is OFRTo avoid damaging
the utensil or blender blades, do not use
any utensil, including spatulas, in the
pitcher or accessoryjar while the motor
is running.
° Cool hot foods, if possible, before
blending. Begin blending warm foods
on STIR.Increase to higher speed, if
necessary.
° Remove center ingredient cup or drizzle
cap when blending hot liquids and
operate only on STIR.Do not place bare
hand on lid when processing hot liquids.
° Stop and check the consistency of
foods after a few seconds to avoid
over-processing.
How To ...
Reconstitute frozen juice: For a 6 oz.
(175 ml) can of orange juice concentrate,
combine the juice and correct amount of
water in the pitcher. Cover and blend at
MIX until thoroughly combined, about 10
to 15 seconds.
For a 12 oz. (355 ml) can, combine the
juice and 1 can of water in the pitcher.
Cover and blend on MIX until thoroughly
combined, about 20 to 30 seconds. Stir in
remaining 2 cans of water.
Dissolve flavored gelatin: Pour boiling
water into the pitcher or accessory jar; add
gelatin. Remove center ingredient cup and
blend on STIRuntil gelatin is dissolved,
about 10 to 30 seconds. Add other
ingredients.
Make cookie and graham cracker
crumbs: Break larger cookies into pieces
about 11/2inches (3.75 cm)in diameter.
Use smaller cookies as-is. Placein pitcher
or accessoryjar. In PULSEMODE, cover
and blend on CHOP,pulsing a few times,
about 3 seconds each time, until desired
consistency is reached. Use the crumbs to
make a quick topping for frozen yogurt,
pudding, or a fruit compote.
To make finer crumbs for pie and dessert
crusts, break graham crackers or cookies
into pieces about 11/2inches (3.75 cm)
in diameter and place in the pitcher or
accessoryjan In PULSEMODE, cover and
blend on LIQUEFY,pulsing a few times
until desired consistency is reached, about
20 to 30 seconds.
Make cracker crumbs: Follow procedure
for cookies. Useas a topping or as an
ingredient in main dish casseroles and
vegetable dishes.
Make bread crumbs: Tear bread into
pieces about 11/2inches (3.75 cm) in
diameter. Follow procedure for cookies.
Use as a topping or as an ingredient in
main dish casseroles and vegetable dishes.
15
Blender Tips
Chop fruits and vegetables: Put 2 cups
(475 ml) of fruit or vegetable chunks in
pitcher or accessory jar. In PULSEMODE,
cover and blend on STIR,pulsing a few
times, about 2 to 3 seconds each time,
until desired consistency is reached.
Puree fruits: Place 2 cups (475 ml)
canned or cooked fruit in pitcher or
accessory jar. Add 2 to 4 tablespoons
(30 to 60 ml) fruit juice or water per cup
(235 ml) of fruit. Cover and blend on
PUREEabout B to 10 seconds.
Puree vegetables: Place2 cups (475 ml)
canned or cooked vegetables in pitcher or
accessoryjar. Add 2 to 4 tablespoons
(30 to 60 ml) broth, water, or milk per cup
(235 ml) of vegetables. Cover and blend
on PUREEabout 10 to 20 seconds.
Puree meats: Placecooked, cubed, tender
meat in pitcher. Add 3 to 4 tablespoons
(45 to 60 ml) broth, water, or milk per cup
(235 ml) of meat. Cover and blend on STIR
10 seconds. Stop the Blender and scrape
sides of pitcher. Cover and blend on PUREE
10 to 20 seconds longer.
Puree cottage cheese or ricotta
cheese: Place cottage cheese or ricotta
cheese in pitcher or accessory jar. Cover
and blend on MIX until smooth, about
25 to 35 seconds. Stop the Blender and
scrape sides as needed. If necessary, add
1 tablespoon (15 ml) of skim milk per cup
(235 ml) of cottage cheese. Use as a base
for low-fat dips and spreads.
Combine liquid ingredients for baked
goods: Pour liquid ingredients in pitcher
or accessoryjar. Cover and blend on
LIQUEFYuntil well mixed, about 10 to
15 seconds. Pour liquid mixture over dry
ingredients and stir well.
Take lumps out of gravy: If sauce or
gravy becomes lumpy, place in the pitcher
or accessoryjar. Cover and blend on MIX
until smooth, about 5 to 10 seconds.
Combine flour and liquid for
thickening: Placeflour and liquid in
pitcher or accessoryjar. Cover and blend on
STIRuntil smooth, about 5 to 10 seconds.
Prepare white sauce: Place milk, flour,
and salt, if desired, in pitcher or accessory
jar. Cover,and blend on STIRuntil well
mixed, about 5to 10 seconds. Pour into
saucepan and cook as usual.
Prepare pancake or waffle batter
from mix: Place mix and other ingredients
in pitcher or accessory jar. Cover and
blend on MIX until well-mixed, 10 to 20
seconds. Stop the Blender and scrape sides
of the pitcher or accessoryjar as needed.
Grate cheese: Cut very cold cheese into
V: to 1 inch (1.25 to 1.5 cm) cubes. Place
up to V: cup (120 ml) cheese in the pitcher
or accessoryjar. Cover and blend on
LIQUEFYabout 5 to 10 seconds. For hard
cheeses, such as Parmesan, bring to room
temperature, then blend on LIQUEFYfor
10 to 15 seconds.
Make oatmeal for a baby: Place
uncooked rolled oats in pitcher or accessory
jar. In PULSEMODE, blend on MIX until
desired consistency, about 5 pulses, 2 to 3
seconds each pulse. Cook as usual.
Make baby food from adult food:
Place prepared adult food in pitcher or
accessoryjar. Cover and blend on STIR
about 10 seconds. Then blend on PUREE
about 10 to 30 seconds.
Rinse your Blender jar: Fill pitcher or
accessoryjar, half full with warm water.
Add a few drops of dishwashing liquid.
Cover and blend on STIRuntil sides are
clean, about 5 to 10 seconds. Rinse
and dry. For complete cleaning, pitcher,
accessoryjar, lid(s), ingredient cup, drizzle
cap, and locking collar and blade assembly
and sealing ring can also be cleaned in an
automatic dishwasher. Refer to Care and
Cleaning, page 13.
16
KitchenAid ® Blender Warranty
Length of
Warranty:
50 United States, the
District of Columbia,
Canada, and Puerto
Rico: One-year limited
warranty from date of
purchase.
KitchenAid
Will Pay For:
50 United States, the
District of Columbia
and Canada: Hassle-free
replacement of your
Blender. Seethe following
page for details on how to
arrange for replacement.
OR
In Puerto Rico:
The replacement parts
and repair labor costs to
correct defects in materials
and workmanship. Service
must be provided by an
Authorized KitchenAid
KitchenAid
Will Not Pay For:
A. Repairswhen Blender
is used in other than
normal single family
home use.
B. Damage resulting from
accident, alteration,
misuse or abuse or
use with products
not approved by
KitchenAid.
C. Replacement parts or
repair labor costs for
Blender when operated
outside the country of
purchase.
ServiceCenter. To arrange
for service, follow the
instructions on page 18.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES IMPLIED
WARRANTIES,INCLUDINGTO THE EXTENTAPPLICABLEWARRANTIESOF
MERCHANTABILITYOR FITNESSFORA PARTICULARPURPOSE,ARE EXCLUDEDTO THE
EXTENTLEGALLYPERMISSIBLE.ANY IMPLIEDWARRANTIESTHAT MAY BE IMPOSED BY
LAW ARE LIMITEDTO ONE YEAR, OR THE SHORTESTPERIODALLOWED BY LAW. SOME
STATESAND PROVINCESDO NOT ALLOW LIMITATIONS OR EXCLUSIONSON HOW LONG
AN IMPLIEDWARRANTY OF MERCHANTABILITYOR FITNESSLASTS,SO THE ABOVE
LIMITATIONSOR EXCLUSIONSMAY NOT APPLYTO YOU.
IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER'S SOLE AND EXCLUSIVE
REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS
LIMITED WARRANTY KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY
RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives
you specific legal rights and you may also have other rights which vary from state to
state or province to province.
17
Hassle-Free Replacement Warranty-
50 United States and District of Columbia
We're so confident the quality of our
products meets the exacting standards of
KitchenAid that, if your Blender should
fail within the first year of ownership,
KitchenAid will arrange to deliver an
identical or comparable replacement to
your door free of charge and arrange to
have your original Blender returned to us.
Your replacement unit will also be covered
by our one year limited warranty. Please
follow these instructions to receive this
quality service.
If your KitchenAid _ Blender should fail
within the first year of ownership, simply
call our toll-free Customer Satisfaction
Center at 1-800-541-6390 Monday
through Friday, 8 a.m. to 8 p.m. (Eastern
Time), or Saturday, 10 a.m. to 5 p.m. Give
the consultant your complete shipping
address. (No RO. Box numbers, please.)
When you receive your replacement
Blender, use the carton and packing
materials to pack up your original Blenden
In the carton, include your name and
address on a sheet of paper along with
a copy of the proof of purchase (register
receipt, credit card slip, etc.).
Hassle-Free Replacement Warranty- Canada
We're so confident the quality of our
products meets the exacting standards
of the KitchenAid _"brand that, if your
Blender should fail within the first year
of ownership, KitchenAid Canada will
replace your Blender with an identical
or comparable replacement. Your
replacement unit will also be covered
by our one year limited warranty. Please
follow these instructions to receive this
quality service.
If your KitchenAid _ Blender should fail
within the first year of ownership, take the
Blender or ship collect to an Authorized
KitchenAid Service Centre. In the carton
include your name and complete shipping
address along with a copy of the proof
of purchase (register receipt, credit card
slip, etc.). Your replacement Blender will
be returned prepaid and insured. If you
are unable to obtain satisfactory service
in this manner call our toll-free Customer
experience Centre at 1-800-807-6777.
Or write to us at:
Customer eXperience Centre
KitchenAid Canada
1901 Minnesota Court
Mississauga, ON L5N 3A7
How to Arrange for Warranty Service
in Puerto Rico
Your KitchenAid _ Blender is covered by
a one-year limited warranty from the
date of purchase. KitchenAid will pay
for replacement parts and labor costs
to correct defects in materials and
workmanship. Service must be provided by
an Authorized KitchenAid Service Center.
Take the Blender or ship prepaid and
insured to an Authorized KitchenAid
Service Center. Your repaired Blender will
be returned prepaid and insured. If you
are unable to obtain satisfactory service in
this manner, call toll-free 1-800-541-6390
to learn the location of a Service Center
near you.
18
Loading...