PRODUCT DIMENSIONS
H
G
cabinet
F
not incl.
handle
E
incl.
handle
B
top of
cabinet
French Door Bottom Mount Refrigerator with Ice Dispenser
(KRFC704F, KRFC604F)
Model Number KRFC704F, KRFC604F
Model Size 23.8 cu. ft. (673.9 L)
Height - Overall “A” 717/8" (182.6 cm)
Height - Top of Cabinet “B” 707/8" (180.0 cm)
Depth - Doors Open 90° “C” 43¾" (111.1 cm)
Depth - Drawer Open “D” 457/8" (116.5 cm)
Depth - With Handles “E” 31½" (80.0 cm)
Depth - Without Handles “F” 287/8" (73.3 cm)
Depth - Cabinet Only “G” 243/8" (61.9 cm)
Width - Cabinet “H” 355/8" (90.5 cm)
Width - Door Open 90° “I” 435/8" (110.8 cm)
A
overall
I
C
90˚90˚
D
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Electrical: A 115 V, 60 Hz., AC only, 15 or 20 A fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your freezer be provided.
Use an outlet that cannot be turned off by a switch. Do not use an extension cord.
Water: A cold water supply with water pressure between 35 and 120 psi (241 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions
about your water pressure, call a licensed, qualied plumber.
NOTE: If the water pressure is less than what is required, the ow of water from the water dispenser could decrease or ice cubes could be hollow or irregular shaped.
Reverse Osmosis Water Supply
IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 and 120 psi
(241 and 827 kPa).
If a reverse osmosis water ltration system is connected to your home cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to
60 psi (276 to 414 kPa).
W11375811A
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.
French Door Bottom Mount Refrigerator with Ice Dispenser
14" (35.56 cm)
1/4" (0.64 cm)
3/16" (0.48 cm)
LOCATION REQUIREMENTS
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
IMPORTANT: This refrigerator is designed for indoor and household use only.
To ensure proper ventilation for your refrigerator, allow for a 3/16" (0.48 cm) of space on each side and 1/4" (0.64 cm) space at the top. Allow for a 1" (2.54 cm) space
behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a xed
wall, leave a 14" (35.56 cm) minimum space between the refrigerator and wall to allow the door to swing open.
NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room
temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended
that you do not install the refrigerator near a heat source, such as an oven or radiator.
W11375811A
®
/™ ©2019 KitchenAid. All rights reserved. 06/19