KitchenAid KICU265H, 423, KICU285H User Manual 2

PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

CABINET OPENING DIMENSIONS

VENTING REQUIREMENTS

KICU265H KICU285H

Electrical: 120-volt, 60-Hz, AC-only, 15-amp. electrical supply. Use copper wire only. A timedelay fuse or circuit breaker and separate circuit is recommended.

36" and 48" Island Canopy Range Hood

Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.

Ref. 4360369 Rev. C

10-15-02

8’ (2.4 m) min. 9’ (2.7 m) max. ceiling to floor

support structure

24" (61 cm) min. bottom of canopy to cooking surface

canopy

lower chimney

upper chimney

36" (91.4 cm) base cabinet height

3-1/4" x 10" (8.3 cm x 25 cm) through the roof

roof cap

Horizontal wall venting

3-1/4" x 10" (8.3 cm x 25 cm) through the wall

wall cap

Vertical roof venting

The vent system length should not exceed the lengths shown in the chart below.

Vent size Maximum length

3-1/4" x 10" 35 ft. (10.7 m)

(8.3 cm x 25 cm)

7" (17.8 cm) round 40 ft. (12.2 m)

8" (20.3 cm) round 50 ft. (15.2 m)

9" (22.9 cm) round 60 ft. (18.3 m)

Vent Piece 3-1/4" x 10" (8.3 cm x 25 cm) 7" (17.8 cm), 8" (20.3 cm)

Rectangular or 9" (22.9 cm) Round

45° elbow 7.0 feet 2.5 feet

(2.1 m) (0.8 cm)

90° elbow 5.0 feet 5.0 feet

(1.5 m) (1.5 m)

90° flat elbow 12.0 feet

(3.7 m)

transition to round 5.0 feet

(1.5 m)

wall cap 0.0 feet

(0.0 m)

3-1/4" x 10” (8.3 cm x 25 cm) elbow

wall cap

Maximum length = 35 ft. (10.7 m)

1 — 90° elbow = 5 ft. (1.5 m) 8 ft. (2.4 m) straight = 8 ft. (2.4 m) 1 — wall cap = 0 ft. (0 m)

Length of 3-1/4" x 10" (8.3 cm x 25 cm) system = 13 ft. (4 m)

6 ft. (1.8 m)

2 ft.

(0.6 m)

3-1/4" x 10"

(8.3 cm x 25 cm)

ent system

To calculate the length of the system you need, add the equivalent feet for each vent piece used in the system.

Note: Flexible vent is Not recommended.

If it is used, each foot of flexible vent used is equivalent to two feet (61 cm) of straight metal vent when calculating the vent system length. (Example: A flexible elbow equals two standard elbows.)

36" hood 35-3/8" (89.9 cm) or 48" hood 47-1/4" (120 cm) overall width

23-5/8" (60 cm) overall depth

24-5/8" (62.5 cm) min. 34-3/4" (88.3 cm) max. overall chimney height

23-5/8" (60 cm) lower chimney height

1" (2.5 cm) min. 11-1/8" (23.8 cm) max. upper chimney height

10-1/4" (26 cm) canopy height

7 1/16"

(17.9 cm)

10 7/8"

(27.6 cm)

Note: 3-1/4" x 10" (8.3 cm x 25 cm) rectangular vent must be used inside chimney cover. Round vent will not fit inside chimney cover.