KitchenAid KFP750WH1, KFP750WH0, KFP750PK2, KFP750PK1, KFP750PK0 Owner’s Manual

...
12 CUP
FOOD PROCESSORS
INSTRUCTIONS AND RECIPES
MODELS KFPW760 & KFPM770
i_ii ¸
®
1-800-541-6390
Details Inside
We're so confident
the quality of our
)roducts meets the
standards of
KitchenAid that, if your Food Processor should
fail within the first year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Food
Processor returned to us. Your replacement unit will also be covered
by our one year full warranty. Please follow these instructions to receive this
quality service.
If You Reside In The 50 United
States and your KitchenAid Food
Processor should fail within the first
year of ownership, simply call our toll-flee Customer Satisfaction Center
at 1-800-541 °6390 Monday through Friday, 8 a.m. to 8 p.m. (Eastern Time), or Saturday, 10 a.m. to 5 p.m. Give
the consultant your complete shipping
address. (No RO. Box Numbers, please.)
When you receive your replacement
Food Processor, use the carton and packing materials to pack-up your
original Food Processor. In the carton,
include your name and address on a sheet of paper along with a copy of the proof of purchase (register receipt, credit card charge slip, etc.).
For a detailed explanation of
warranty terms and conditions,
including how to arrange for service
outside the United States, see pages
57 and 58.
Proof of Purchase & Product Registration
Always keep a copy of the sales receipt showing the date of purchase of your Food Processor. Proof of purchase will assure you of in-warranty service.
Before you use your Food Processor, please fill out and mail
your product registration card
packed with the unit. This card will enable us to contact you in the
Model Number Serial Number Date Purchased Store Name
unlikely event of a product safety notification and assist us in
complying with the provisions of the Consumer Product Safety Act. This card does not verify your warranty.
Pleasecomplete the following for
your personal records:
Table of Contents
INTRODUCTION
Hassle-Free Replacement Warranty ........................................... Inside Front Cover
Product Registration Card ........................................................ Inside Front Cover
Food Processor Safety ........................................................................................ 3
Important Safeguards ........................................................................................ 4
Electrical Requirements ...................................................................................... 5
FEATURES AND OPERATION
Food Processor Features ................................................................................... 6
Preparing the Food Processor for Use
Before First Use ........................................................................................... 8
Work Bowl Assembly ................................................................................. 8
Multipurpose Blade & Dough Blade Assembly ............................................ 9
Slicing & Shredding Disc Assembly ............................................................. 9
Mini Bowl Assembly .................................................................................. 10
Chef's Bowl Assembly .............................................................................. 10
Egg Whip Assembly & Use ........................................................................ 11
Citrus Press Assembly & Use ...................................................................... 11
Using the Food Processor
Before Use ................................................................................................ 13
Food Pusher Interlock ............................................................................... 13
Maximum Liquid Level ............................................................................. 13
Turning the Food Processor On and Off ................................................... 13
Using the Pulse Control ............................................................................ 14
2-Piece Food Pusher ................................................................................. 14
Disassembling the Food Processor .................................................................. 14
CAREAND CLEANING
Cleaning the Food Processor............................................................................ 16
Troubleshooting ............................................................................................. 17
Continued on next page
Table of Contents
FOOD PROCESSING TIPS
Using the Multipurpose Blade .......................................................................... 18
Using a Slicing or Shredding Disc .................................................................... 19
Using the Dough Blade .................................................................................... 20
Using the Egg Whip ........................................................................................ 20
Helpful Hints ................................................................................................... 21
RECIPES
Appetizers ...................................................................................................... 23
Salads and Dressings ...................................................................................... 28
Soups and Sandwiches .................................................................................... 32
Vegetables and Side Dishes ............................................................................ 37
Main Dishes ..................................................................................................... 41
Breads ............................................................................................................ 46
Desserts ........................................................................................................... 51
WARRANTY AND SERVICE INFORMATION
Warranty for the 50 United States and District of Columbia ............................ 57
Warranty For Puerto Rico ................................................................................. 58
Arranging for Service after the Warranty Expires .............................................. 58
Arranging for Service Outside the 50 United States and Puerto Rico ................ 58
Ordering Accessories and Replacement Parts ................................................... 59
Food Processor Safety
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you
and others. All safety messages will follow the safety alert symbol and either
the word "DANGER" or "WARNING." These words mean:
You can be killed or seriously injured
if you don't immediately follow instructions.
You can be killed or seriously injured
if you don't follow instructions,
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are
not followed.
iMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
1, Read all instructions, 2, To protect against risk of electrical shock do not put Food Processor in
water or other liquid,
3. Olose supervision is necessary when any appliance is used by or near children.
4, Unplug from the outlet when not in use, before putting on or taking off
parts, and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest Authorized Service Facility for examination, repair,
or electrical or mechanical adjustment,
7. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter.
10. Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to
the Food Processor. A scraper may be used but must be used only when the Food Processor is not running.
11. Blades are sharp. Handle carefully.
12. To reduce the risk of injury, never place cutting blade or discs on base without first putting bowl properly in place.
13. Be certain cover is securely locked in place before operating appliance.
14. Never feed food by hand. Always use the food pusher.
15. Do not attempt to defeat the cover interlock mechanism.
16. This product is designed for household use only.
SAVE THESE INSTRUCTIONS
Electrical Requirements
Model KFPM770: Volts: 120 V.A.C. only
Hertz: 60 Hz
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these
instructions can result in death, fire or electrical shock.
NOTE: Model KFPM770 has a 3 prong grounded plug. To reduce the
risk of electrical shock, this plug will fit in an outlet only one way. If the plug does not fit in the oudet, contact a qualified electrician. Do not modify the plug in any way.
Model KFPW760: Volts: 120 V.A.C. only.
Hertz: 60 Hz
NOTE: Model KFPW760 has a polarized plug (one blade is wider
than the other). To reduce the risk of electrical shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
Do not use an extension cord. If the power supply cord is too short, have
a qualified electrician or serviceman install an outlet near the appliance.
Do not use an extension cord. If the power supply cord is too short, have
a qualified electrician or serviceman install an outlet near the appliance.
Food Processor Features
Medium (4 mm) Slicing Disc
Fine (2 mm)
Slicing Disc
\ /
Medium (4 mm) Shredding Disc
Disc Stem
Work Bowl
Heavy Duty Base
10-Cup Chef's Bowl
Citrus Press
2-Piece
Cone
igg Whip
Work Bowl Cover with Ultra Wide Mouth TM Feed Tube
Stainless Steel Multipurpose Blade
4-Cup Mini Bowl and Mini Blade
.... Spatula/
Cleaning Tool
Dough Blade
2-Piece Food Pusher
Food Processor Features
Work Bowl Cover with Ultra Wide Mouth TM Feed Tube
One of the industry's largest, the Ultra Wide Mouth TM feed tube
accommodates large items - like tomatoes, cucumbers, and potatoes-
with a minimum of sectioning or slicing.
2-Piece Food Pusher For smaller items, remove the small
pusher from the central tube in the large pusher. The small pusher and
feed tube make it easy to process herbs, nuts, single carrots and celery. The small pusher can also be used as a convenient 4 oz. measuring cup.
12-Cup Work Bowl The tough polycarbonate bowl
provides capacity for large jobs. Chef's Bowl
Place the 10-cup Chef's Bowl inside the Work Bowl, and slice or shred a
food item while keeping the Work Bowl clean for another ingredient.
Mini Bowl and Mini Blade 4-cup bowl and stainless steel blade
are perfect for small chopping and mixing Jobs.
Fine (2 ram) Slicing Disc Disc produces approximately _A6-inch
slices of most foods, from delicate strawberries to partially frozen meats.
Medium (4 mm) Slicing Disc Disc produces approximately Ysqnch
slices of most foods.
Medium (4 mm) Shredding Disc Disc produces approximately Ys-inch shreds of most firm fruits, vegetables,
and cheese.
Disc Stem Stem fits over the power shaft on the
base and into the bottom of a slicing
or shredding disc.
Stainless Steel
Multipurpose Blade
Versatile blade chops, minces, blends,
mixes, and emulsifies in a matter of
seconds.
Dough Blade The dough blade is specially designed for mixing and kneading yeast dough.
Egg Whip The egg whip will quickly whip cream and egg whites for meringues,
mousses, souffles, and desserts,
Citrus Press
Press consists of a
Strainer Basket,
2-Piece Cone, and Lever
Arm. Use the removable
outer cone for larger
items, such as grapefruit,
and the inner cone for
lemons and limes.
Heavy-Duty Base The base features the off, on, and
pulse buttons along with the power
shaft, which rotates the blades and discs.
Spatula/Cleaning Tool Special shape facilitates food removal
from bowls, discs, and blades.
Chef's Accessory Case Stylish and durable slim-line case
organizes and protects
blades, discs, and
accessories.
// \
Preparing the Food Processor for Use
Cut Hazard
Handle blades carefully. Failure to do so can result in
cuts.
Before First Use Before using your Food Processor for
the first time, wash the work bowl, work bowl cover, chef's bowl, mini
bowl, feed tube pusher, discs, and blades either by hand or in the dishwasher (see "Cleaning the Food Processor" on page 16).
Work Bowl Assembly
1. Place the Food Processor base on a dry, level countertop with the
controls facing forward. Do not plug in the unit until it is completely assembled.
2. With the handle just to the left of center, place the work bowl on the base, fitting the center opening over the power shaft.
3. Grasp the work bowl handle and turn the bowl to the right until it locks into position.
Insert the desired accessory into the work bowl. See pages 9-1 2 for accessory instructions.
Place the work bowl cover on the work bowl with the feed tube just
to the left of the work bowl handle. Grasp the feed tube and
turn the cover to the right until it locks into place.
NOTE: Do not attach the cover to the work bowl before the work bowl is
locked on the base. Damage to the work bowl may result.
6. Fit the 2-piece food pusher into the feed tube.
Preparing the Food Processor for Use
Cut Hazard
Handle blades carefully. Failure to do so can result in
cuts.
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire or electrical shock.
7 Plug into a proper electrical outlet
(see "Electrical Requirements" on page 5).
NOTE: Your Food Processor will not operate unless the work bowl and
work bowl cover are properly locked on the base, and the pusher is
inserted to the maximum fill line on the feed tube.
Do not remove the work bowl from
the base without first removing the work bowl cover. Damage to the work bowl may result.
Multipurpose Blade and Dough Blade Assembly
Place the blade on the power shaft. Rotate the blade so it falls into place
on the shaft.
Slicing and Shredding Disc Assembly
1. Place the disc stem on the power shaft.
9
Continued on next page
Preparing the Food Processor for Use
Cut Hazard
Handle blades carefully. Failure to do so can result in
cuts.
2. Fit the disc over the metal pin on the disc stem, then rotate the disc
until it falls fully onto the stem.
Mini Bowl Assembly
1. Place the mini bowl inside the work bowl over the power shaft.
Rotate the mini bowl until it falls into place. When properly seated
in the work bowl, the mini bowl cannot be rotated.
2. Fit the mini blade on the power shaft. It may be necessary to
rotate the blade until it falls into place.
The mini bowl can also be placed in the chef's bowl in a similar
manner.
3. To remove the mini bowl after processing, lift the bowl using the
two finger grips located along the top edge of the bowl.
Chef's Bowl Assembly Place the chef's howl inside the work
bowl over the power shaft. Rotate the chef's bowl until it falls into
place. When properly seated in the work bowl, the chef's bowl cannot
be rotated.
The chef's bowl can only be used
with the slicing and shredding discs - the multipurpose blade cannot be
used. To remove the chef's bowl after processing, lift the bowl using the
two finger grips located along the top edge of the bowl.
10
Preparing the Food Processor for Use
Egg Whip Assembly and Use The egg whip is designed to whip
egg whites or heavy cream to create toppings or soft meringues. For the best results, at least 1 cup of heavy cream or 3 egg whites should be whipped at a time. Whipping smaller quantities may not result in maximum
volume. To assemble:
The egg whip consists of 4 pieces - the egg whip stem, stem cover, whip paddle, and cap.
-- Cap
Stem
Cover
Whip Paddle
!
Stem
1. Place the egg-whip stem on the power shaft. Slowly turn the stem until it drops fully onto the shaft.
2. Align the L-shaped notch on the whip paddle with the small post
on the stem cover, and slide the paddle onto the cover. Turn slightly
to lock paddle.
3. Fit the stem cover and paddle over the egg whip stem. Push downward to engage the ridges of the stem with the gears of the paddle.
4. Fit the egg whip cap over the egg whip stem. Push downward to lock it into place.
5. Place the work bowl cover on the work bowl with the feed tube just
to the left of the handle. Make sure the center pin of the egg
whip fits into the center opening of the cover. Grasp the feed tube and turn the cover to the right to lock it into place. Insert the pusher into the feed tube. The egg whip is now ready to operate.
6. Press the On Button and whip ingredients to the desired texture
and volume. Press the Off Button when finished.
To disassemble:
1. Unplug the base from the electrical outlet. Remove the work
bowl cover with a clockwise turn.
2. LiR the egg whip assembly off the power shaft. Remove whipped ingredients from the work bowl.
3. Pull the cap from the egg whip assembly. Push downward on the stem pin to remove stem from the stem cover. Turn the egg whip paddle to unlock, and slide the paddle from the stem cover.
Citrus Press Assembly and Use
1. Position and lock the work bowl on the base.
2. Place the strainer basket in the bowl with the locking clip to the
left of the work bowl handle.
3. Turn the basket counter-clockwise until the clip locks into the handle.
Continued on next page
11
Preparing the Food Processor for Use
4. The 2-piece cone offers two sizes; choose the right size for the fruit you are juicing. Use the outer cone for grapefruit, oranges and other large fruits, Remove the outer cone
to reveal a smaller inner cone that's perfect for lemons and limes,
5. Open the lid and place the cone inside the strainer basket over
the power shaft. It may be necessary to rotate the cone until it falls into place,
6. Halve the fruit to be juiced.
7. Place fruit half on cone.
8, Close the lid of the strainer basket,
Hold the lever arm down firmly with an open palm to maintain even pressure, Operate the citrus press only when the lever arm is in the down position, holding the
fruit on the cone,
.......
9. Operate the citrus press by pressing the On Button or the
Pulse Button.
10. When juice is fully extracted, Press the Off Button.
NOTE: Do not exceed the maximum liquid level line on the work bowl, or
juice will leak from the bowl.
11. Unlock the strainer basket by turning it clockwise. Remove
juiced fruit, cone, and strainer
basket from the work bowl.
12. Remove the work bowl from Food
Processor and pour juice into
desired container.
13. To detach the clip-on lever arm from the strainer basket for
thorough cleaning, pull the clip at the bottom of the basket away
from the basket side and remove the lever-arm from the basket.
14. When reattaching the lever arm to the strainer basket, make sure
the tabs on the clip snap securely
into a pair of holes in the bottom
of the basket.
NOTE: Use of the citrus press without the clip-on lever arm is not recommended. If you do use it
without the lever arm, remove the lever arm from the basket (see
Step 1 3).
12
Using the Food Processor
Rotating Blade Hazard Always use food pusher. Keep fingers out of openings. Keep away from children.
Failure to do so can result in
amputation or cuts.
Before Use Before operating the Food Processor,
be sure the work bowl, blades, and work bowl cover are properly
assembled on the Food Processor base (see "Preparing the Food
Processor for Use" starting on page 8).
Food Pusher Interlock
Maximum Liquid Level This line on the work bowl indicates
the maximum level of liquid that can be processed by the Food Processor.
Turning the Food Processor On and Off
1. To turn on the Food Processor, press the On Button. The unit will
run continuously and the indicator light will glow.
The food pusher is part of the safety interlock system. The Food Processor
will not run unless the pusher is inserted to the maximum fill line on
the feed tube.
2. To stop the Food Processor, press the Off Button. The indicator light will go out and an automatic brake will stop the action of the
blade or disk within seconds.
3. Wait until the blade or disk comes to a complete stop before
removing the work bowl cover. Be sure to turn off the Food Processor
before removing the work bowl cover, or before unplugging the
unit.
NOTE: If the unit fails to operate, make sure the work bowl and cover
are properly locked on the base, and the food pusher is inserted to the
maximum fill line on the feed tube (see "Preparing the Food Processor
for Use" starting on page 8).
13
Using the Food Processor
Rotating Blade Hazard
Always use food pusher. Keep fingers out of openings.
Keep away from children. Failure to do so can result in
amputation or cuts.
Using the Pulse Control The pulse control allows precise
control of the duration and frequency of processing. It's great for jobs which require a light touch. Just press
and hold the Pulse Button to start processing, and release it to stop. The indicator light will glow each time the
Pulse Button is pressed.
The 2=Piece Food Pusher To slice or shred small items, insert
the 2-piece food pusher into the feed tube, then turn the small center
pusher clockwise to unlock and remove. Use the center feed tube and
pusher to process small or slender items, or to add liquid while the Food Processor is running. When not using
the small feed tube, lock the small pusher into place by turning it
counter-clockwise.
Disassembling the Food Processor
Cut Hazard
Handle blades carefully. Failure to do so can result in
cuts.
NOTE: If you have difficulty removing the pusher from the feed tube, it is likely that food particles have become
lodged in the interlock system To free the pusher, soak the work bowl cover
in warm water or wash it in a dishwasher.
left and remove.
1. Turn the work bowl cover to the
14
Disassembling the Food Processor
2. I[ using a disc, remove it before removing the bowl. Place two fingers under each side of the disc and lift it straight up. Remove the
disc stem.
..... : i
3. If using the mini bowl or chef's bowl, grasp and remove the bowl using the finger grips located along the top edge of the bowl.
4. Turn the work bowl to the left to unlock it from the base. Lift to
remove.
5,
The multipurpose blade can be removed from the work bowl
before the contents are emptied.
The blade can also be held in
place as you remove food: grasp
the work bowl from the bottom and place one finger through the
center opening to grip the blade shaft. Then remove food from the
bowl and blade with a spatula.
....
!i
..... )f
15
Cleaning the Food Processor
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
1. Press the Off Button and unplug the Food Processor before
cleaning.
2. Wipe the base and cord with a warm, sudsy cloth, and wipe clean with a damp cloth. Dry with a soft
cloth. Do not use abrasive cleansers or scouring pads.
3. All the other parts of the Food Processor are dishwasher safe. Be
sure to load them away from exposed heating elements in the dishwasher. If washing the Food Processor parts by hand, avoid the
use of abrasive cleansers or scouring pads. They may scratch
or cloud the work bowl and cover, Thoroughly dry all parts after
washing.
4. To prevent damage to the interlock system, always store the work
bowl and work bowl cover in the unlocked position when not in
use.
5. Wrap the power cord around the work bowl. Secure the plug by clipping it to the cord,
6. Disassembled discs, shafts, and blades should be stored in the
provided storage case, and in a location out of the reach of
children.
16
Troubleshooting
, If your Food Processor should
fail to operate, check the following:
- Make sure the work bowl and work bowl cover are properly locked on
the base, and the food pusher is
inserted to the maximum fill line on
the feed tube.
- See if the power cord is plugged into a proper electrical outlet (see "Electrical Requirements" on page 5). If it is, unplug the Food Processor, then plug it into the
same outlet again. If the Food
Processor still does not work, check
the fuse or circuit breaker on the electrical circuit the Food Processor
is connected to and make sure the
circuit is closed.
if the Food Processor shuts off while it is running:
- The Food Processor may be overheated. If the motor exceeds a
certain temperature, it will automatically shut off to prevent damage. This should be an extremely rare occurrence. If it
happens, press the Off Button and
wait 15 minutes for the Food
Processor to cool before resuming. If the Food Processor still refuses to
run, wait an additional 15 minutes for the Food Processor to cool.
, ]f you have difficulty removing
the food pusher from the feed tube:
- Food particles are probably lodged in the interlock system. To free the pusher, soak the work bowl cover in
warm water or wash it in a
dishwasher.
If the problem cannot be corrected with the steps in this section, see the KitchenAid Warranty and Service section on pages 57-58. Do not
return the Food Processor to the retailer - they do not provide service.
17
Loading...
+ 43 hidden pages