COMMERCIAL-STYLE DUAL FUEL RANGE
QUICK REFERENCE GUIDE
WIFI Antenna Module
Oven Light Button
Mode and Temperature Knob and Indicator Light
Oven Start Button and Indicator Light
WIFI Indicator Light
Remote Enabled Indicator Light
SAID Label
KFDC506J shown on right
(reference Use & Care Guide for 30” and 48” diagrams)
LIGHT INDICATORS AND BEHAVIORS
FUNCTION |
USE & LIGHT BEHAVIOR |
||||
Oven Start |
Solid White Light |
||||
Button |
The Start Button will illuminate solid white when the most recent command was sent from the app and the appliance is |
||||
|
being controlled remotely. The light will turn off as soon as an action is taken on the appliance. |
||||
|
Pulsing White Light |
||||
|
The Start Button will flash white to prompt the user to press start after the Mode and Temperature have been selected. |
||||
|
If no action is taken after 2 minutes, a tone will sound and the unit will timeout and return to idle. |
||||
|
To exit idle, re-select a Mode and Temperature before pressing the Start Button. |
||||
|
Quick-Blinking White Light |
||||
|
If an invalid knob combination has been chosen and the Start Button is pressed, the Indicator Light will quickly blink and |
||||
|
a tone will sound to indicate that the chosen combination is invalid. See the Mode and Temperature Compatibility Table |
||||
|
for valid combinations. |
||||
Mode and |
Solid White Light |
||||
Temperature |
When a Mode or Temperature is selected, and the combination is valid, the Mode and Temperature Indicator Light |
||||
Indicator Light |
will illuminate white. |
||||
|
Solid Red Light |
||||
|
After a valid Mode and Temperature have been selected and the Start Button has been pressed, the Indicator Light |
||||
|
will turn red until the preheat is completed. |
||||
|
Solid White Light |
||||
|
The light will turn solid white and a tone will sound when the preheat is complete. If there is no preheat for a cycle, |
||||
|
the preheat completes immediately and the light turns solid white. |
||||
|
Quick-Blinking White Light |
||||
|
If an invalid knob combination has been selected, the light will blink and a tone will sound prompting the user to select |
||||
|
a valid combination. The Indicator Light will continue to blink and a tone will sound every 30 seconds until the error is |
||||
|
fixed or the unit will timeout after 2 minutes of inactivity and return to idle. |
||||
|
Pulsing Amber Light |
||||
|
The Indicator Light will pulse amber if the oven is undergoing a 100+ degree decrease in temperature |
||||
|
(i.e. changing from Bake 450 to Bake 350 ) or if the oven is too hot to properly proof and needs to cool down. |
||||
WIFI Indicator |
Solid White Light |
||||
Light |
The WIFI Indicator Light illuminates white when the unit is WIFI enabled allowing the user to monitor |
||||
|
the unit. All lights will turn off in idle even when the unit is connected to WIFI. |
||||
Remote Enabled |
Solid White Light |
||||
Indicator Light |
The Remote Indicator Light illuminates white when the unit is remote enabled and the user can send instructions |
||||
|
to the unit. All lights will turn off in idle even when the unit is remote enabled. |
||||
Griddle Power |
Solid Blue Light |
||||
Indicator Light* |
The Griddle Power Indicator Light illuminates blue when the griddle is powered on. |
||||
Griddle |
Blinking Blue Light |
||||
Preheat Light* |
The Griddle Preheat Light flashes blue while the griddle is preheating. |
||||
|
Solid Blue Light |
||||
|
Once the preheat temperature has been reached, the Indicator Light turns solid blue. |
||||
|
|
|
*on 48” models only |
||
|
|
|
|
|
|
W11114332A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WIFI CONNECTIVITY
WIFI Connectivity and Remote Operation
Models are provided with a WIFI Antenna Module that allows the unit to be remotely operated. The control is capable of monitoring and performing remote operations once the remote enabling function sequence is properly initiated at the appliance.
To connect your appliance:
1.Download the KitchenAid™ App from the Google Play® or Apple App Store and create an account.
2.Locate the SAID Label using the diagram on the front of this Guide.
3.Set both the Mode and Temperature Knob to the WIFI mode.
4.Once the knobs are in position, press the pulsing Start Button.
5.When the WIFI Indicator Light to the left of the knob starts blinking white, follow the steps in the app.
6.When the connection is complete the WIFI Indicator Light will turn solid white.
7.To enable remote operations, turn on “Remote Control” in the app. The Remote Indicator Light will turn solid white to signify remote control commands can be sent to the range.
For more information on WIFI Connectivity, visit www.kitchenaid.com/connect.
MODE AND TEMPERATURE COMPATIBILITY TABLE
MODE KNOB |
TEMPERATURE KNOB |
Bake |
Proof |
|
Warm |
|
Temperatures (225-500°F) |
Broil |
Broil High |
|
Broil Low |
Convect Bake |
Temperatures (225-500°F) |
Convect Roast |
Temperatures (225-500°F) |
Convect Broil |
Broil High |
|
Broil Low |
Clean |
Clean |
WIFI |
WIFI* |
|
*See WIFI Connectivity Section |
|
|
NOTE: When the unit is on, Mode can be changed between Bake, Convect Bake, Convect Roast, and Broil/Convect Broil. Press the Start Button to confirm Mode change.
*Appliance must be set to Remote Enable. Features subject to change. Compatible connected appliance required. Details and privacy info at www.kitchenaid.com/connect.
CHANGING MODE/TEMPERATURE DURING A CYCLE
ACTION
Invalid Mode/
Temperature
Combination Made
During a Cycle*
*Mode and Temperature
Compatibility Table
Changing Mode
Selection During
a Cycle
Changing Temperature
Selection During
a Cycle
If the Temperature is changed during a cycle to a selection that is invalid and the unit was in
a previous cycle, the unit will remain in the previous cycle until corrected.
The Mode and Temperature Indicator Light will blink to show an invalid selection has been made and will continue to blink until corrected.
If the Mode is changed during a cycle
to a selection that is valid, the Start Button will blink to indicate prompt for action. Press the Start Button to begin new Mode selection.
If the Mode is changed during a cycle to a selection that is valid, the Temperature will automatically change.
EXAMPLE
Mode is in Bake, Temperature is at 350°F (177°C), Start Button is pressed and cycle is running. Then Mode is moved to
Broil High. Unit will continue to Bake at 350°F (177°C).
If the Mode is moved from Bake to Convect Bake, the Start Button will blink as a prompt for action.
If the Temperature during a Bake cycle is moved from 350°F to 450°F (177°C to
232°C) the unit will Bake at 450°F (232°C).
W11114332A ®/™ ©2019 KitchenAid. All rights reserved. All other trademarks are owned by their respective companies. D190462KCA