When using electrical appliances, basic safety precautions should always
be followed, including the following:
1. Read all instructions.
2. To protect against risk of electric shock, do not put the Burr Grinder in water
or other liquid.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug the Burr Grinder from the outlet when not in use, before putting on
or taking off parts, and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug, or after the
appliance malfunctions or is dropped or damaged in any manner. Return the
appliance to the nearest authorized service facility for examination, repair,
or electrical or mechanical adjustment.
7. The use of attachments not recommended or sold by KitchenAid may cause
re, electric shock, or injury.
BURR GRINDER SAFETY | 3
BURR GRINDER SAFETY
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Check the bean hopper for the presence of foreign objects before using.
SAVE THESE INSTRUCTIONS
This product is designed for household use only.
ELECTRICAL REQUIREMENTS
Volts: 120 V.A.C.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
Hertz: 60 HZ
NOTE: This Burr Grinder has a 3 prong
grounded plug. To reduce the risk of
electrical shock, the plug will t in an
outlet only one way. If the plug does
not t in the outlet, contact a qualied
electrician. Do not modify the plug in
any way.
A short power-supply cord is provided
to reduce the risk resulting from
becoming entangled in or tripping
over a longer cord. Extension cords
are available and may be used if care
is exercised in their use.
If a longer extension cord is used:
The marked electrical rating of the
extension cord should be at least
as great as the electrical rating of
the appliance.
• The extension cord should be
a grounding-type 3 wire cord.
• The cord should be arranged so it
will not drape over the countertop
or tabletop where it can be pulled
on by children or tripped over.
4 | BURR GRINDER SAFETY
USING THE BURR GRINDER
GRIND SETTING CHART
NOTE: The bean hopper holds a maximum of 7 oz (200 g) of beans.
HELPFUL TIP: Because partially ground coffee beans may remain between the burrs
after the Burr Grinder is turned off, it is recommended to select a ner grind setting
while the Burr Grinder is running.
This Burr Grinder offers 15 different grind levels, available in half-step increments
from 1 to 8. Select the grind by turning the grind control dial to the desired setting
on the grind settings ring, as shown in this chart. With continued use, you will be
able to rene the setting to match your own tastes.
GRINDCOFFEE TYPESETTING
COARSEFRENCH PRESS1-3
MEDIUM-COARSESIPHON 3-5
MEDIUMAUTOMATIC DRIP5-6
MEDIUM-FINEPOUR OVER6-7
FINE ESPRESSO8
ENGLISH
ASSEMBLING AND RUNNING THE BURR GRINDER
NOTE: Before using the Burr Grinder, wipe the motor housing and cord with a clean
damp cloth. Wash the bean hopper, lid, and ground jar in hot soapy water, then rinse
and dry; or, wash in the top rack of a dishwasher.
Make certain the Burr Grinder is
unplugged. Attach the bean hopper
1
to the top of the motor housing,
turning clockwise until snug.
Slide the ground jar onto the
jar platform, making certain it
2
is centered in the middle.
USING THE BURR GRINDER | 5
USING THE BURR GRINDER
Fill the bean hopper, then attach
3
the lid.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
Select your desired grind setting,
4
using the “Grind setting chart”.
Plug the Burr Grinder into
a grounded 3 prong outlet.
Flip the POWER switch up to turn
on, and begin grinding your coffee.
5
Flip the POWER switch down when
you have ground the desired amount
of coffee.
6 | USING THE BURR GRINDER
After grinding, remove the ground
jar from the Burr Grinder, and scoop
6
out the ground coffee.
USING THE BURR GRINDER
ADJUSTING THE BURRS FOR A FINER OR COARSER GRIND
If you’re an espresso or French Press acionado, you may wish to adjust the factory
setting of the cutting burrs to provide optimum performance for your style of brewing.
ENGLISH
Make sure the bean hopper is
empty; then, flip the POWER switch
1
up to turn on and run for a few
seconds to clear any debris.
Using a 5/32 in (4mm) allen wrench
or a hex-head screwdriver, remove
the screw from the front of the
grind control dial by turning it
3
counterclockwise. You will be able
to see the grind control gear after
the dial is removed.
For maximum grind fineness: Turn
the grind control dial to level 8.
2
For maximum grind coarseness:
Turn the grind control dial to level 1.
For maximum grind fineness: Flip
the POWER switch up to turn on
the Burr Grinder.
4
For maximum grind coarseness:
You do not need to turn the Burr
Grinder on while adjusting the burrs.
NOTE: If you cannot get the exact
maximum coarseness of grind you prefer
by adjusting the Burr Grinder while it is
off, try adjusting with the Burr Grinder
turned on.
FOR DETAILED INFORMATION ON USING THE BURR GRINDER:
Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes,
and tips on how to use your Burr Grinder.
USING THE BURR GRINDER | 7
USING THE BURR GRINDER
For maximum grind fineness:
Turn the grind control gear
clockwise, one “click” at a time,
until you hear a distinct grating
or rubbing sound that signifies
5a
the burrs are touching. Then, turn
the grind control gear one “click”
counterclockwise. The grating or
rubbing sound will stop.
5b
For maximum grind coarseness:
Turn the grind control gear
counterclockwise, one “click”
at a time, until the clicking sound
diminishes and the gear offers
little resistance to being turned.
Flip the POWER switch off.
If you adjusted for maximum grind
fineness: Reattach the grind control
dial, making certain the dial indicator
points to grind level 8.
6
If you adjusted for maximum grind
coarseness: Reattach the grind
control dial, making certain the dial
indicator points to grind level 1.
IMPORTANT: If the Burr Grinder produces a grating or “rubbing” sound during use,
the burrs have been improperly adjusted. Damage to the burrs will result. Readjust
the burrs immediately.
8 | USING THE BURR GRINDER
CARE AND CLEANING
CLEANING THE BURR GRINDER AND BURRS
IMPORTANT: To avoid damage, never wash or immerse the Burr Grinder main body,
cutting burrs, burr-shaft assembly, or faceplate in water, or place in the dishwasher.
The bean hopper and lid, and grind jar are dishwasher safe, top rack only.
ENGLISH
After using the Burr Grinder, remove
the bean hopper, lid, and grind jar.
Wash these pieces by hand with
1
a soft cloth, in warm sudsy water;
or, wash in the top rack of the
dishwasher.
Remove the faceplate assembly by
loosening the screws on either side.
3
Screws can be loosened by hand.
IMPORTANT: If the Burr Grinder is used frequently, the burrs should be cleaned
regularly for best performance. Cleaning enables the burrs to achieve the nest,
most consistent grinds possible.
FOR DETAILED INFORMATION ON CLEANING THE BURR GRINDER:
Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes,
and tips on how to use your Burr Grinder.
Clean the Burr Grinder main body
and all its parts by hand only.
Wash with a soft, damp cloth. Dry
2
thoroughly with a soft dry cloth. Do
not wash in the dishwasher. Do not
immerse in water.
Pull the burr-shaft assembly out
to clean with the other parts. Using
the burr-cleaning brush, clean the
4
burr mounted on the burr-shaft
assembly and the burr mounted
in the motor housing.
CARE AND CLEANING | 9
TROUBLESHOOTING
If your Burr Grinder should malfunction or fail to operate during use, please check
the following:
- If the Burr Grinder runs when switched
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions
can result in death, fire, or
electrical shock.
- Is the Burr Grinder plugged in? Check
to see if the Burr Grinder is plugged
into a grounded 3 prong outlet. If it is,
unplug the Burr Grinder, then plug it into
the same outlet again. If it still does not
work, check the fuse or circuit breaker on
the electrical circuit the Burr Grinder is
connected to and make sure the circuit is
closed. If it does not run after taking these
steps, a foreign object may be jamming
the cutting burrs. Refer to “Care and
cleaning” section for detailed information
on cleaning the cutting burrs.
on, but coffee does not grind: The burrs
require cleaning or are worn. Refer
to “Care and cleaning” section for
detailed information on cleaning
the cutting burrs.
- If the Burr Grinder is operating normally,
but stops abruptly: Immediately turn
off the Burr Grinder. A coffee bean
may have jammed the cutting burrs.
Refer to “Care and cleaning” section
for detailed information on cleaning
the cutting burrs.
- If the grind is too coarse, or the Burr
Grinder isn’t producing an acceptable
range of grinds: Refer to the “Adjusting
the burrs for a ner or coarser grind”
section for more information.
If the problem is not due to one of
the above items, see the “Arranging
for Service” chapter in the “Warranty
and service” section.
Do not return the Burr Grinder to the
retailer, as they do not provide service.
10 | TROUBLESHOOTING
WARRANTY AND SERVICE
KITCHENAID® BURR GRINDER WARRANTY FOR
THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA,
PUERTO RICO, AND CANADA
This warranty extends to the purchaser and any succeeding owner for Burr Grinders
operated in the 50 United States, the District of Columbia, Puerto Rico, and Canada.
Length of Warranty:One Year Full Warranty from date of purchase.
KitchenAid Will Pay
for Your Choice of:
KitchenAid Will
Not Pay for:
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
IMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED
TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY
BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD
ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS
OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT
APPLY TO YOU.
IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER’S SOLE AND
EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE
TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA
DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES. This warranty gives you specic legal rights and you may also have other
rights which vary from state to state or province to province.
Hassle-Free Replacement of your Burr Grinder. See
the next page for details on how to arrange for
service, or call the Customer eXperience Center
toll-free at 1-800-541-6390.
OR
The replacement parts and repair labor costs to correct
defects in materials and workmanship.
Service must be provided by an Authorized
KitchenAid Service Center.
A. Repairs when your Burr Grinder is used in
other than normal single family home use.
B. Damage resulting from accident, alteration,
misuse or abuse.
C. Any shipping or handling costs to deliver
your Burr Grinder to an Authorized Service Center.
D. Replacement parts or repair labor costs for
Burr Grinders operated outside the 50 United
States, District of Columbia, Puerto Rico,
and Canada.
ENGLISH
WARRANTY AND SERVICE | 11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.