Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
follow instructions.
can be killed or seriously injured if you don't
You
instructions.
follow
2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools Needed
■ Tape measure
■ Phillips screwdriver
■ Level
B
A
A. 14" (35.6 cm)
B. 22³⁄₈" (56.8 cm)
C. 11¹⁄₈" (28.3 cm)
Parts Needed
■ Screws (type to be determined by the requirements of the
Product Dimensions
C
cabinet material)
F
E
A. 26³⁄₈" (66.9 cm)
B. 23¹⁄₈" (58.8 cm)
C. 20¹⁄₄" (51.5 cm)
A
B
C
D
D. 20³⁄₈" (51.8 cm)
E. 23½" (59.7 cm)
F. 5½" (14.0 cm)
3
Cabinet Cutout Dimensions
The dimension chart and illustration below include cutout dimensions and minimum spacing requirements for all built-in outdoor
products. The illustration is for reference. The design of your cabinet layout can be personalized, but the dimensions for the cutouts and
minimum spacing must be followed.
Installation must conform to local codes.
3" (7.6 cm) min.
to open hood
C
K
9¹⁄₈"
(23.2 cm)
K
5"
(12.7 cm) min.
C
E
Warming
Drawer
E
12" min.
to any
12" (30.5 cm) min.
to any accessory
accessory
D
A
Grills or
Side
or
Sear
Burners
Utility
or
Trash
Drawer
J
Refreshment Centers
D
Access Doors
20⁷⁄₈" (53.0 cm)
1¹⁄₂"
(3.8 cm) min.
20⁵⁄₈" (52.4 cm)
Refrigerator
or
Ice Maker
L
H
K
2¹⁄₂" (6.4 cm) min.
G
K
K
F
B
M
Minimum Spacing Requirement Between Cutouts - Dimension K
Between 2 or more sets of Access Doors adjacent to each other:
K = 14" (35.6 cm) when 2 adjacent doors are opened to 90 degrees
K = 8" (20.3 cm) when 1 of the adjacent doors is opened to 90 degrees
Between a set of Access Doors and a Trash Drawer, Utility Drawer, Warming Drawer, Refrigerator, or Ice Maker:
K = 8" (20.3 cm) when 1 of the adjacent doors is opened to 90 degrees
Between a Trash Drawer, Utility Drawer, or Warming Drawer:
K = 3" (7.6 cm)
Cabinet Height and Depth Dimensions
Dimension A MinimumDimension B Minimum
With outdoor refrigerator37" (94.0 cm)26" (66.0 cm)
Grill with insulated jacket36½" (92.7 cm)27" (68.6 cm)
Grill without insulated jacket35½" (90.2 cm)26" (66.0 cm)