KitchenAid KBRS36FKT02, KBRC36FMS02, KBRS36FKX01, KBRV36FPM01, KBRP36FMS02 User Manual

...
BOTTOM MOUNT BUILT-IN REFRIGERATOR
Use & Care Guide
For questions about features, operation/performance, parts accessories or service, call: 1-800-422-1230
In Canada, call for assistance 1-800-461-5681, for installation and service, call: 1-800-807-6777 or visit our website at...
www.kitchenaid.com or www.KitchenAid.ca
REFRIGERADOR EMPOTRADO,
CON MONTAJE INFERIOR
Manual de Uso y Cuidado
En Canadá, para obtener asistencia llame al 1-800-461-5681, para instalación y servicio llame al: 1-800-807-6777 o
visite nuestra página de Internet... www.kitchenaid.com
RÉFRIGÉRATEUR ENCASTRÉ AVEC
CONGÉLATEUR EN DESSOUS
Guide d’utilisation et d’entretien
Au Canada, pour assistance composez le 1-800-461-5681, pour installation ou service composez le 1-800-807-6777 ou visitez notre site web à...
www.KitchenAid.ca
Table of Contents/Índice/Table des matières .................................................................2
2257388
TABLE OF CONTENTS
REFRIGERATOR SAFETY.......................................................... 3
Proper Disposal of Your Old Refrigerator ....................................3
BEFORE USE ..................................................................................4
REFRIGERATOR USE ....................................................................4
Power On/Off Switch ...................................................................4
Normal Sounds ............................................................................5
Ensuring Proper Air Circulation....................................................5
Using the Controls .......................................................................6
REFRIGERATOR FEATURES ........................................................7
Water Filtration System................................................................7
Refrigerator Shelves.....................................................................8
Deli Locker....................................................................................8
Deli Locker Temperature Control.................................................8
Crispers and Covers ....................................................................9
Crisper Humidity Control .............................................................9
Covered Utility Bin .......................................................................9
Wine Rack ..................................................................................10
FREEZER FEATURES..................................................................10
Ice Maker and Storage Bin/Bucket............................................10
Pull-out Freezer Basket..............................................................10
DOOR FEATURES ........................................................................11
Door Bins....................................................................................11
REFRIGERATOR CARE ...............................................................11
Cleaning......................................................................................11
Changing the Light Bulbs........................................................... 12
Power Interruptions....................................................................12
Vacation Care .............................................................................12
TROUBLESHOOTING ..................................................................13
ASSISTANCE OR SERVICE .........................................................14
In the U.S.A. ...............................................................................14
In Canada ...................................................................................15
Accessories................................................................................15
WATER FILTER CERTIFICATIONS.............................................15
PRODUCT DATA SHEETS....................................................... 16
WARRANTY ..................................................................................17
ÍNDICE
SEGURIDAD DEL REFRIGERADOR........................................ 18
Cómo deshacerse de su refrigerador viejo ...............................18
ANTES DE USAR ..........................................................................19
USO DE SU REFRIGERADOR.....................................................19
Interruptor de Encendido/Apagado ...........................................19
Sonidos normales ......................................................................20
Cómo asegurar la debida circulación del aire ...........................21
Uso de los controles ..................................................................21
CARACTERÍSTICAS DEL REFRIGERADOR ..............................23
Sistema de filtrado de agua .......................................................23
Estantes del refrigerador ............................................................24
Cajón para carnes frías ..............................................................24
Control de temperatura del cajón para carnes frías ..................24
Cajones para verduras y tapas ..................................................24
Control de humedad del cajón para verduras...........................25
Compartimiento de uso general con tapa .................................25
Portabotellas ..............................................................................26
CARACTERÍSTICAS DEL CONGELADOR .................................26
Fábrica de hielo y depósito/balde de almacenamiento ............26
Canastilla removible del congelador..........................................27
CARACTERÍSTICAS DE LA PUERTA .........................................27
Recipientes de la puerta ............................................................27
CUIDADO DE SU REFRIGERADOR............................................28
Limpieza .....................................................................................28
Cómo cambiar los focos............................................................29
Cortes de corriente.....................................................................29
Cuidado durante las vacaciones................................................29
SOLUCIÓN DE PROBLEMAS......................................................29
AYUDA O SERVICIO TÉCNICO...................................................32
En los EE.UU. .............................................................................32
En Canadá..................................................................................32
Accesorios ..................................................................................32
HOJA DE DATOS DEL PRODUCTO........................................33
GARANTÍA.....................................................................................34
TABLE DES MATIÈRES
SÉCURITÉ DU RÉFRIGÉRATEUR ...........................................35
Mise au rebut de votre vieux réfrigérateur.................................35
AVANT L’UTILISATION ................................................................36
UTILISATION DU RÉFRIGÉRATEUR ..........................................36
Commutateur marche/arrêt........................................................36
Sons normaux ............................................................................37
Pour sassurer dune circulation dair appropriée......................38
Utilisation des commandes........................................................38
CARACTÉRISTIQUES DU RÉFRIGÉRATEUR ...........................40
Système de filtration d'eau ........................................................40
Tablettes du réfrigérateur...........................................................41
Tiroir de spécialités alimentaires................................................41
Commande de température du tiroir
de spécialités alimentaires .........................................................41
Bacs à légumes et couvercles ...................................................42
Réglage de lhumidité dans le bac à légumes...........................42
Casier utilitaire couvert...............................................................42
Casier à vin .................................................................................43
CARACTÉRISTIQUES DU CONGÉLATEUR...............................43
Machine à glaçons et bac/seau dentreposage ........................43
Panier du congélateur amovible ................................................44
CARACTÉRISTIQUES DE LA PORTE .........................................44
Compartiments dans la porte ....................................................44
ENTRETIEN DU RÉFRIGÉRATEUR ............................................45
Nettoyage ...................................................................................45
Remplacement des ampoules d’éclairage ................................46
Pannes de courant .....................................................................46
Entretien avant les vacances .....................................................46
DÉPANNAGE.................................................................................47
ASSISTANCE OU SERVICE .........................................................49
Accessoires ................................................................................49
FEUILLES DE DONNÉES SUR LE PRODUIT..........................50
GARANTIE .....................................................................................51
2

REFRIGERATOR SAFETY

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
can be killed or seriously injured if you don't
You follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic
precautions:
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Disconnect power before servicing.
Replace all panels before operating.
Remove doors from your old refrigerator.
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
Use nonflammable cleaner.
Keep flammable materials and vapors, such as
gasoline, away from refrigerator.
Use two or more people to move and install
refrigerator.
Disconnect power before installing ice maker (on
ice maker kit ready models only).
Use a sturdy glass when dispensing ice or water (on some models).
SAVE THESE INSTRUCTIONS
Proper Disposal of
Yo ur O ld R ef r ig er a to r
WARNING
Suffocation Hazard Remove doors from your old refrigerator. Failure to do so can result in death or
brain damage.
IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous – even if they will sit for just a few days. If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.
Before you throw away your old refrigerator or freezer:
Take off the doors.
Leave the shelves in place so that children may not easily
climb inside.
3

BEFORE USE

Removing packaging materials
Remove tape and glue residue from surfaces before turning
on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see the Refrigerator Safety section.
Cleaning before use
After you remove all of the packaging materials, clean the inside of your refrigerator before using it. See the cleaning instructions in the Refrigerator Care section.
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when re­moving them to avoid impact from dropping.

REFRIGERATOR USE

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in
death, fire, or electrical shock.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
Power On/Off Switch
If you need to turn the power to your refrigerator ON or OFF, you must remove the top grille assembly to access the On/Off switch. Turn the power to the refrigerator OFF when cleaning or changing light bulbs.
Panel Models (on some models)
To remove top grille:
Grasp both ends of the top grille assembly.
1.
4
2. Push the top grille assembly straight up, then pull straight
out. Lay the assembly on a soft surface.
2 21
1. Top grille
2. Cabinet side trims
To replace top grille:
1. Insert top grille hooks (located on the back of the top grille)
into the slots on the side trim.
2. Pull grille down slightly to lock into place.
Wraparound Door Models (on some models)
To remove top grille:
1. Grasp both ends of louver panel. Push louver panel straight
up, then pull straight out. Lay the panel on a soft surface.
2. Grasp both ends of the top grille. Push top grille straight up,
then pull straight out. Lay the top grille on a soft surface.
1. Top grille
2. Cabinet side trim
3. Louver panel
To replace top grille:
1. Insert top grille hooks (located on the back of the top grille
panel) into the slots on side trim. Pull grille down slightly to lock into place.
2. Insert louver panel hooks (located on the back of the louver
panel) into the slots on the side trim. Pull panel down slightly to lock into place.
Normal Sounds
Your new refrigerator may make sounds that your old one didn’t make. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, such as the floor, walls, and cabinets, can make the sounds seem louder. The following describes the kinds of sounds and what may be making them.
If your product is equipped with an ice maker, you will hear a
buzzing sound when the water valve opens to fill the ice maker for each cycle.
Your refrigerator is designed to run more efficiently to keep
your food items at the desired temperatures and to minimize energy usage. The high efficiency compressor and fans may cause your refrigerator to run longer than your old one. You may also hear a pulsating or high-pitched sound from the compressor or fans adjusting to optimize performance.
You may hear the evaporator fan motor circulating air through
the refrigerator and freezer compartments. The fan speed may increase as you open the doors or add warm food.
Rattling noises may come from the flow of refrigerant, the
water line, or items stored on top of the refrigerator. Water dripping on the defrost heater during a defrost cycle
may cause a sizzling sound.
As each cycle ends, you may hear a gurgling sound due to
the refrigerant flowing in your refrigerator.
Contraction and expansion of the inside walls may cause a
popping noise. You may hear air being forced over the condenser by the
condenser fan.
You may hear water running into the drain pan during the
defrost cycle.
Ensuring Proper Air Circulation
In order to ensure proper temperatures, you need to permit airflow between the refrigerator and freezer sections. As shown in the illustration, cool air enters the freezer section through vents in the rear and top. The air flows forward through the freezer section and recirculates under the freezer floor. Cool air enters the refrigerator section through the top, flows down and across shelves to the doors and recirculates to return air vents at the bottom.
To Turn Power On or Off:
1. Remove top grille.
2. Press main power switch to the ON or OFF position.
3. Replace top grille. IMPORTANT: Be sure the power switch is set to the ON position
after cleaning refrigerator or changing light bulbs.
1
1. Power On/Off switch
Do not block any of these vents with food packages. If the vents are blocked, airflow will be prevented and temperature and moisture problems may occur.
5
IMPORTANT: Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To prevent odor transfer and drying out of food, wrap or cover foods tightly.
Using the Controls
Digital Controls
IMPORTANT:
The Refrigerator Control adjusts the refrigerator compartment
temperature. The Freezer Control adjusts the freezer compartment temperature.
Wait 24 hours after you turn on the refrigerator before you put
food into it. If you add food before the refrigerator has cooled completely, your food may spoil.
NOTE: Adjusting the Refrigerator and Freezer Controls to a lower (colder) setting will not cool the compartments any faster.
If the temperature is too warm or too cold in the refrigerator or
freezer, first check the air vents to be sure they are not blocked before adjusting the controls.
The preset settings should be correct for normal household
usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
For your convenience, your controls are preset at the factory. When installing your refrigerator, make sure that the controls are still preset to the “mid-settings” as shown. The digital control panel is located at the top of the refrigerator compartment.
NOTE: The factory recommended set points are 0°F (-18°C) for the freezer and 37°F (3°C) for the refrigerator.
To turn refrigerator on and view set points:
Press and hold POWER (ON/OFF) for 2 seconds.
Adjusting Digital Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
To adjust set point temperatures:
Press the refrigerator or freezer PLUS (+) or MINUS (-) key
pad until the desired temperature is reached.
NOTE: The set point range for the freezer is -9°F to 9°F (-23°C to
-13°C). The set point range for the refrigerator is 32°F to 46°F (0°C to 8°C).
CONDITION/REASON: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold Not set correctly for conditions
REFRIGERATOR too warm High use or room very warm
FREEZER too cold
REFRIGERATOR Control 1° higher
REFRIGERATOR Control 1° lower
FREEZER Control 1° higher
Not set correctly for conditions
FREEZER too warm/too little
FREEZER Control 1° lower
ice High use or heavy ice use
Additional Digital Control Panel Features
Additional features are located on the control panel at the top of the refrigerator compartment.
NOTE: After the refrigerator is turned on, the Over Temperature audio alarm and indicator light will activate every 1¹⁄₂ hours until the refrigerator and freezer temperatures are below 48°F (9°C) and 15°F (-9°C), respectively. To turn off the alarm and indicator light, press the OVER TEMPERATURE RESET. (See the “Over Temperature Reset section.)
To view the Celsius temperatures:
Press °C SELECT touch pad. The negative sign (-) will light
up. To redisplay degrees Fahrenheit, press °C SELECT again.
NOTE: If the freezer temperature is below zero, the negative sign next to the freezer display will light up. This is normal.
WATER FILTER Status & Reset
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
The water filter display will help you know when it is time to change your filter. To change the filter, see the Water Filtration System section.
INDICATOR: STATUS:
99 percent New filter installed
10 percent Order replacement filter
0 percent or flow decreases Replace filter
After replacing the water filter, press RESET and hold for 2
seconds to change the water filter display to 99 percent.
6
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full grocery loads, or temporarily warm room temperatures.
Press MAX COOL to turn on the Max Cool feature. The Max
Cool indicator light will remain on for 24 hours unless manually turned off.
Door Open
The Door Open indicator light will flash, an alarm will sound and the interior lights will turn off when a door is open for longer than 10 minutes. When the door is closed, the sound alarm will reset and turn off but the Door Open indicator light will continue to flash until the temperature is equal to or below 45°F (7°C) and 15°F (-9°C) for the refrigerator and freezer compartments respectively. You can also reset the Door Open sound alarm by pressing the OVER TEMPERATURE RESET.
NOTE:
the refrigerator returns to the previous temperature set points.
The temperature display will not change. After 24 hours,
Over Temperature Reset
The Over Temperature feature is designed to let you know when either the refrigerator temperature rises above 48°F (9°C) or the freezer temperature rises above 15°F (-9°C) for longer than 1¹⁄₂ hours. The audio alarm will shut off automatically when the temperature returns to normal, but the indicator light will continue to flash to let you know that an over temperature condition has occurred.
IMPORTANT:
may spoil. See the Power Interruptions” section for more information and minimize door openings until temperatures return to normal.
Press OVER TEMPERATURE RESET to turn off the audio
alarm and flashing indicator light.
The Over Temperature feature will continue to activate every
1¹⁄₂ hours until refrigerator and freezer temperatures are below 48°F (9°C) and 15°F (-9°C), respectively.
If the Over Temperature Alarm activates, your food
Holiday Mode
The Holiday Mode feature is designed for the traveler who wishes to save additional energy or for those whose religious observances require turning off the lights and ice maker. By selecting this feature, the temperature set points remain unchanged, the ice maker will be disabled and the interior lights will turn off.
Press HOLIDAY MODE to turn on the Holiday Mode feature.
This feature will remain on until the Holiday Mode key is pressed again.
REFRIGERATOR
FEATURES
Water Filtration System
The Base Grille Water Filter Status Light
The water filter indicator display or light will help you know when to change your water filter cartridge. The display or light is located at the top of the refrigerator compartment.
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
A new water filter should display a reading of 99% and will continue to decrease as the filter life is used. When display reads 10%, it is time to order a replacement filter. It is recommended that you replace the base grille water filter cartridge when the water filter indicator light changes to 0% OR when water flow to your water dispenser or ice maker decreases noticeably. (See Changing the Base Grille Filter later in this section.)
After changing the water filter cartridge, reset the water filter status light by pressing and holding the RESET for 2 seconds. The indicator light will change to 99% when the filter indicator is reset.
If the Max Cool feature has been selected prior to
NOTE:
turning on the Holiday Mode feature, then the set points will remain at 32°F (0°C) and -10°F (-23°C) for the refrigerator and freezer compartments until the Max Cool feature times out. The refrigerator will then return to the previous temperature set points.
Call Service
If the Call Service indicator light is flashing, call for service. See the Assistance or Service section for information on calling for service.
Changing the Base Grille Filter
Locate the water filter cartridge cap in the front base grille.
1.
Rotate the cap counterclockwise to a vertical position and pull the cap and filter cartridge out through the base grille.
There will be water in the cartridge. Some spilling may
NOTE:
occur. Remove the cartridge cap by sliding it off the end of the old
2.
cartridge. The cap will slide to the left or right. DO NOT DISCARD THE CAP.
7
3. Take the new cartridge out of its packaging and remove
protective cover from o-rings.
4. Slide the cartridge cap onto the new cartridge. See
illustration in Step 2.
5. With cartridge cap in the vertical position, push the new filter
cartridge into the base grille until it stops. Rotate the cartridge cap clockwise to a horizontal position. Discard the first three batches of ice produced after replacing the filter.
Using the Ice Maker Without the Water Filter
You can run the ice maker without a water filter cartridge. Your ice will not be filtered.
1. Remove the base grille water filter cartridge.
2. Slide the cartridge cap off the end of the filter cartridge. DO
NOT DISCARD THE CAP. With the cartridge cap in the vertical position, insert the cap into the base grille until it stops.
Shelves and Shelf Frames
To remove and replace a shelf/frame:
1. Remove the shelf/frame by tilting it up at the front and lifting it
out of the shelf supports. Pull shelf straight out.
2. Replace the shelf/frame by guiding the rear shelf hooks into
the shelf supports. Tilt the front of the shelf up until the rear shelf hooks drop into the shelf supports.
3. Lower the front of the shelf and check to make sure that the
shelf is securely in position.
Deli Locker
The Deli Locker is designed to provide colder storage temperatures than the average refrigerator temperature. The air in the drawer can be set to the National Livestock and Meat Board recommended storage temperature range of 28°- 32°F (-2°- 0°C) for fresh meats. It is also large enough to store large party trays.
To remove and replace the Deli Locker drawer:
1. Remove the deli locker by rolling it out to the stop. Lift up
front slightly. Pull deli locker out the rest of the way.
2. Replace by positioning the rollers between the front roller of
track and the track. Push deli locker up and onto track. Slide back until stops.
3. Rotate the cartridge cap to a horizontal position. The
cartridge cap might not be even with the base grille.
Refrigerator Shelves
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when re­moving them to avoid impact from dropping.
The shelves in your refrigerator are adjustable to meet your individual storage needs.
Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open, and save energy.
Deli Locker Temperature Control
The Deli Locker temperature control allows you to adjust the storage temperature of the Deli Locker. Cold air flows into the Deli Locker through an air duct between the freezer and the refrigerator. Setting the control allows more or less cold air through the air duct. Set the control to “COLD” to close the air duct.
IMPORTANT: If a food item freezes in the Deli Locker, utility drawer, or crisper, turn the Deli Locker temperature control to COLD.
8
Meat Storage Guide
Store most meat in original wrapping as long as it is airtight and moisture-proof. Rewrap if necessary. See the following chart for storage times. When storing meat longer than the times given, freeze the meat.
Fresh fish or shellfish .................use same day as purchased
Chicken, ground beef, variety meat (liver, etc.)......... 1-2 days
Cold cuts, steaks/roasts ...........................................3-5 days
Cured meats ........................................................... 7-10 days
Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.
Replace the crisper cover by holding the glass shelf firmly
2.
with both hands, tilt the shelf at an angle and position it above the support rails. Place shelf gently on support rails on side wall.
Crispers and Covers
To remove and replace the crisper or utility drawer:
Remove contents from the drawer.
1.
Using the handle, slide the crisper drawer straight out to the
2.
stop. Lifting up slightly on the crisper cover, remove the crisper
3.
drawer roller from the side wall track and pull the drawer out at an angle to remove the crisper drawer roller from behind the large roller in the center support track.
Replace the crisper drawer by lifting up slightly on the crisper
4.
cover and angling the crisper roller behind the large roller in the center support track, then engage the other crisper roller into the side wall track. Slide the drawer back in fully.
Crisper Humidity Control
You can control the amount of humidity in the moisture-sealed crisper. The crisper controls are located on the front of the crispers. Adjust the control to any setting between LOW and HIGH.
LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.
Fruit: Wash, let dry and store in refrigerator in plastic bag or
crisper. Do not wash or hull berries until they are ready to use. Sort and keep berries in original container in crisper, or store in a loosely closed paper bag on a refrigerator shelf.
Vegetables with skins: Place in plastic bags or plastic
container and store in crisper.
HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.
Leafy vegetables: Wash in cold water, drain and trim or tear
off bruised and discolored areas. Place in plastic bag or plastic container and store in crisper.
Humidity control locations:
To remove and replace the crisper covers:
Remove food from crisper cover. Pull both crispers out about
1.
4 in. (10.16 cm). Reach under the glass shelf with both hands and lift gently upward until back of shelf is free. Tilt shelf at an angle and remove shelf from refrigerator being careful not to bump the glass.
Covered Utility Bin
For long-term storage, store eggs in a covered container
NOTE:
or in their original carton on an interior shelf.
9
Wine Rack
To remove and replace the wine rack:
Remove the rack by pulling it straight out from the shelf.
1.
Replace the rack by sliding it in between the shelf and the
2.
wall of the refrigerator.

FREEZER FEATURES

Ice Maker and Storage Bin/Bucket
To turn the ice maker on/off:
The on/off switch for the ice maker is a wire shutoff arm located on the side of the ice maker.
To turn the ice maker on, simply lower the wire shutoff arm.
1.
REMEMBER:
Allow 24 hours to produce the first batch of ice.
Discard the first three batches of ice produced to avoid
impurities that may be flushed out of the system. The quality of your ice will be only as good as the quality of
the water supplied to your ice maker.
Avoid connecting the ice maker to a softened water supply.
Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.
It is normal for the ice cubes to be attached at the corners.
They will break apart easily. Do not force the wire shutoff arm up or down.
Do not store anything on top of the ice maker or in the ice
storage bin.
It may take three to four days for the ice bin to completely fill,
if no ice is used.
Pull-out Freezer Basket
The freezer basket can be used to store bags of frozen fruits and vegetables that may slide off freezer shelves.
To remove and replace the freezer basket:
Turn off the ice maker. Pull basket out of freezer.
1.
Lift basket up and out.
2.
NOTE:
made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position.
To manually turn the ice maker off, lift the wire shutoff arm to
2.
the OFF (arm up) position and listen for the click to make sure the ice maker will not continue to operate.
Your ice maker has an automatic shutoff. As ice is
To increase ice production rate:
In normal ice production, the ice maker should produce
approximately 7 to 9 batches of ice in a 24-hour period. If ice is not being made fast enough, turn the Freezer Control toward a higher (colder) number. Wait 24 hours between each increase.
To care for ice storage bin:
Empty the ice bin. Use warm water to melt the ice if
1.
necessary.
NOTE:
bin. This can cause damage to the ice container and the dispenser mechanism.
Wash ice bin with a mild detergent, rinse well and dry
2.
thoroughly. Do not use harsh or abrasive cleaners or solvents.
Never use anything sharp to break up the ice in the
Replace the basket by placing rear of basket in shelf tracks.
3.
Lower front of basket Tur n o n i ce m ak e r.
4.
Frozen Food Storage Guide
Storage times will vary according to the quality and type of food, the type of packaging or wrap used (should be airtight and moisture-proof), and the storage temperature. Ice crystals inside a sealed package are normal. This simply means that moisture in the food and air inside the package have condensed, creating ice crystals.
Put no more unfrozen food into the freezer than will freeze within 24 hours (no more than 2 to 3 lbs. of food per cubic foot [907-1,350 g per L] of freezer space). Leave enough space in the freezer for air to circulate around packages. Be careful to leave enough room for the door to close tightly.
For more information on preparing food for freezing, check a freezer guide or reliable cookbook.
10

DOOR FEATURES

REFRIGERATOR CARE

Door Bins
The top two door bins hold 2-liter bottles and are adjustable. The bottom door bin is fixed and can hold gallon containers.
Gallon Door Bin
Do not place an interior shelf directly across from the
NOTE:
gallon door bin, as shown following. The gallon door bin or its contents will prevent the refrigerator door from closing and could cause damage to bins and shelves.
Door Bins
To remove and replace the door bins:
Remove the bin by lifting it up and pulling it straight out.
1.
Replace the bin by insert the hooks into the slots on both
2.
sides of the refrigerator door. Push the bin down to lock it into place.
Cleaning
Explosion Hazard
Use nonflammable cleaner.
Failure to do so can result in death, explosion, or fire.
Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to prevent odors from building up. Wipe up spills immediately.
To clean your refrigerator:
Remove the top grille, see the Power On/Off Switch
1.
section. Press power switch to the OFF position.
2.
Remove all removable parts from inside, such as shelves,
3.
crispers, etc. Hand wash, rinse, and dry removable parts and interior
4.
surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in warm water.
Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on plastic parts, interior and door liners or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools. These can scratch or damage materials.
To help remove odors, you can wash interior walls with a
mixture of warm water and baking soda (2 tbs. to 1 qt. [26 g to .95 L] of water).
Wash stainless steel and painted metal exteriors with a clean
5.
sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth. For additional protection against damage to painted metal exteriors, apply appliance wax (or auto paste wax) with a clean, soft cloth. Do not wax plastic parts.
NOTE:
new and to remove minor scuffs or marks, it is suggested that you use the manufacturer’s approved Stainless Steel Cleaner & Polish.
IMPORTANT:
Do not allow the Stainless Steel Cleaner & Polish to come into contact with any plastic parts such as the trim pieces, dispenser covers or door gaskets. If accidental contact does occur, clean plastic part with a sponge and mild detergent in warm water. Dry thoroughly with a soft cloth. To order the cleaner, see the “Accessories” section.
To keep your Stainless Steel refrigerator looking like
This cleaner is for Stainless Steel parts only!
11
6. Clean the condenser coils located behind the top grille
ventilation panel regularly. Coils may need to be cleaned as often as every other month. This may help save energy.
Use a vacuum with an extended attachment to clean the
condenser coils when they are dusty or dirty.
7. Clean defrost pan using mild detergent in warm water. Dry
thoroughly.
Remove the base grille by removing a screw at each end.
Remove the defrost pan by pushing up on the retaining
clip under the refrigerator while sliding the pan forward.
21
1. Defrost pan
2. Retaining clip
Replace the defrost pan by positioning the edge of the
defrost pan approximately 7 in. (17.8 cm) from the left side of the refrigerator. Lift defrost pan into guides and push back and place pan inside of retaining clip. Replace the base grille and base grille screws.
8. Press the power switch to the ON position.
9. Replace the top grille. See the Power On/Off Switch
section.
Changing the Light Bulbs
NOTE: Not all appliance bulbs will fit your refrigerator. Be sure to replace the bulb with one of the same size and shape. The lights require a 40-watt to 60-watt maximum appliance bulb. Replacement bulbs are available from your dealer.
1. Remove the top grille. See the “Power On/Off Switch
section.
2. Press power switch to the OFF position.
3. Remove light shield when applicable as shown. NOTE: To clean a light shield, wash it with warm water and a
liquid detergent. Rinse and dry the shield well.
4. Remove light bulb and replace with one of the same size,
shape and wattage.
5. Replace light shield when applicable as shown.
6. Press the power switch to the ON position.
7. Replace the top grille. See the Power On/Off Switch
section.
Refrigerator Control Panel Lights
Reach behind the refrigerator and freezer control panel (located at the top of the refrigerator compartment) to remove and replace the light bulb.
Freezer Light (Above Ice Storage Bin)
Reach behind the panel (located at the top of the freezer compartment) to remove and replace the light bulb.
Power Interruptions
If the power will be out for 24 hours or less, keep both refrigerator doors closed to help food stay cold and frozen.
If the power will be out for more than 24 hours, do one of the following:
Remove all frozen food and store it in a frozen food locker.
Place 2 lbs. (907 g) of dry ice in the freezer for every cubic
foot (28 L) of freezer space. This will keep the food frozen for two to four days.
If neither a food locker nor dry ice is available, consume or
can perishable food at once.
REMEMBER: A full freezer stays cold longer than a partially filled one. A freezer full of meat stays cold longer than a freezer full of baked goods. If you see that food contains ice crystals, it may be refrozen, although the quality and flavor may be affected. If the condition of the food is poor, dispose of it.
Va cat io n C ar e
Your refrigerator is equipped with the Holiday Mode feature which is designed for the traveler who wishes to save additional energy. By selecting this feature, the temperature set points remain unchanged, the ice maker will be disabled and the interior lights will turn OFF.
If you choose to leave the refrigerator on while you’re away:
1. Use up any perishables and freeze other items.
2. Press HOLIDAY MODE pad.
3. If your refrigerator has an automatic ice maker, shut off water
supply to the ice maker.
4. Empty the ice bin.
5. When you return from vacation, press HOLIDAY MODE to
return to normal operation.
12
If you choose to turn the refrigerator off before you leave:
Remove all food from the refrigerator.
1.
If your refrigerator has an automatic ice maker:
2.
Turn off the water supply to the ice maker at least one day
ahead of time.
When the last load of ice drops, raise the wire shutoff arm
to the OFF (up) position.
Depending on your model, turn the Thermostat Control
3.
(or Refrigerator Control) to OFF see the Using the Controls section.
Clean refrigerator, wipe it, and dry well.
4.
Tape rubber or wood blocks to the tops of both doors to prop
5.
them open far enough for air to get in. This stops odor and mold from building up.

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
Your refrigerator will not operate
Is the power supply cord unplugged?
3 prong outlet.
Has a household fuse or circuit breaker tripped?
the fuse or reset the circuit breaker.
Is the refrigerator or freezer control turned to the OFF position?
Is the refrigerator defrosting?
See the Using the Controls section.
Recheck to see if the refrigerator is operating in 30 minutes. Your refrigerator will regularly run an automatic defrost cycle.
Is the refrigerator not cooling?
For models with digital controls, turn the unit OFF then ON again to reset. See the Using the Controls section. If this does not correct the problem, call for service.
The lights do not work
Is the power supply cord unplugged?
3 prong outlet.
Is a light bulb loose in the socket or burned out?
Changing the Light Bulb(s)” section.
Has the door been open more than 10 minutes?
door is held open for more than 10 minutes, the Door Open indicator light will flash and the interior lights will shut off. See Door Open in the Using the Controls section.
There is water in the defrost drain pan
Is the refrigerator defrosting?
normal for water to drip into the defrost pan.
Is it more humid than normal?
the water in the defrost pan will take longer to evaporate.
The water will evaporate. It is
When it is humid, expect that
Plug into a grounded
Replace
Plug into a grounded
See the
When the
The motor seems to run too much
Is the room temperature hotter than normal?
will run longer under warm conditions. At normal room temperatures, expect your motor to run about 80% of the time. Under warmer conditions, it will run even more.
Has a large amount of food just been added to the refrigerator?
Adding a large amount of food warms the refrigerator. The motor normally will run longer to cool the refrigerator back down.
Are the doors opened often?
The motor will run longer when this occurs. Conserve energy by getting all items out at one time, keeping food organized, and closing the door as soon as possible.
Are the controls not set correctly for the surrounding conditions?
Are the doors not closed completely?
Refer to the Using the Controls section.
Close the doors firmly. If they do not close completely, see The doors will not close completely later in this section.
Are the condenser coils dirty?
This prevents air transfer and makes the motor work harder. Clean the condenser coils. Refer to the “Cleaning” section.
Are the door gaskets not sealed all the way around?
Contact a technician or other qualified person.
Your new refrigerator will run longer than your old one
NOTE:
due to its high-efficiency motor.
The motor
The refrigerator seems to make too much noise
The sounds may be normal for your refrigerator.
Normal Sounds section.
See the
The ice maker is not producing ice or not enough ice
Has the ice maker just been installed?
to 17 lbs. (6.4 to 7.7 kg) of ice. The ice bin can take three to four days to completely fill, if no ice is used during this time.
Is the freezer temperature cold enough to produce ice?
Wait 24 hours after ice maker hook-up for ice production. See the Using the Controls section.
Is the ice maker wire shutoff arm in the OFF (wire shutoff arm up) position (on some models)?
to the ON (wire shutoff arm down) position. See the “Ice Maker and Storage Bin/Bucket section.
Is the water line shutoff valve to the refrigerator not turned on?
Turn on the water valve. See the Connect Water
Line to Refrigerator section in the Installation Instructions.
Is an ice cube jammed in the ice maker ejector arm?
Remove the ice from the ejector arm with a plastic utensil. See the Ice Maker and Storage Bin/Bucket section.
Does the ice maker mold have water in it or has no ice been produced?
Make sure your refrigerator has been connected to a water supply and the supply shutoff valve is turned on. See the Connect Water Line to Refrigerator section in the Installation Instructions.
Has a large amount of ice just been removed?
to four days for an empty ice bin to completely fill, if no ice is used during this time.
Are the controls set correctly?
See the Using the Controls
section.
If not due to any of the above, there may be a problem
NOTE:
with the water line. Call for service.
The ice bin holds 14
Lower wire shutoff arm
Allow three
13
Off-taste, odor or gray color in the ice
The doors will not close completely
Are the plumbing connections new, causing discolored or off-flavored ice?
Have the ice cubes been stored too long?
Discard the first few batches of ice.
Throw old ice
away and make a new supply.
Does the freezer and ice bin or bucket need to be cleaned?
See the “Cleaning” or “Ice Maker and Storage Bin/
Bucket section.
Has food in the freezer or refrigerator been wrapped properly?
Use airtight, moisture-proof packaging to help
prevent odor transfer to stored food.
Does the water contain minerals (such as sulfur)?
may need to be installed to remove the minerals.
The divider between the two compartments is warm
The warmth is probably due to normal operation of the automatic exterior moisture control. If still concerned, call for service.
Temperature is too warm
Are the air vents blocked in either compartment?
prevents the movement of cold air from the freezer to the refrigerator. Remove any objects from in front of the air vents. See the Ensuring Proper Air Circulation section for the location of air vents.
Are the door(s) opened often?
The refrigerator will warm when this occurs. Keep the refrigerator cool by getting all items out at one time, keeping food organized, and closing the door as soon as possible.
Has a large amount of food just been added to the refrigerator or freezer?
Adding a large amount of food warms the refrigerator. It can take several hours for the refrigerator to return to the normal temperature.
Are the controls set correctly for the surrounding conditions?
Is the refrigerator not cooling?
See the Using the Controls section.
For models with digital controls, turn the unit OFF then ON again to reset. See the Using the Controls section. If this does not correct the problem, call for service.
There is interior moisture buildup
A filter
This
Are food packages blocking the door open?
Rearrange containers so that they fit more tightly and take up less space.
Is the ice bin or ice bucket out of position?
Push the ice bin in all the way. If the ice bin does not go in all the way, it may not be put in straight. Pull it out and try again. See the Ice Maker and Storage Bin/Bucket section.
Are the pans, shelves, bins, or baskets out of position?
Put the crisper cover and all pans, shelves, bins, and baskets back into their correct positions. See the Crisper and Crisper Covers section for more information.
Are the gaskets sticking?
Clean gaskets according to the
directions in the “Cleaning section.
Does the refrigerator wobble or seem unstable?
Level the refrigerator. See the Adjust Doors and Level Refrigerator sections in the Installation Instructions.
The doors are difficult to open
Are the gaskets dirty or sticky?
the directions in the “Cleaning” section.
Clean gaskets according to
ASSISTANCE
OR SERVICE
Before calling for assistance or service, please check Troubleshooting. It may save you the cost of a service call. If you still need help, follow the instructions below.
When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you only use factory specified replacement parts. Factory specified replacement parts will fit right and work right because they are made with the same precision used to build every new KITCHENAID
To locate factory specified replacement parts in your area, call our Customer Interaction Center telephone number or your nearest designated service center.
®
appliance.
Are the air vents blocked in the refrigerator?
Remove any objects from in front of the air vents. See the “Ensuring Proper Air Circulation section for the location of air vents.
Are the door(s) opened often?
Avoid humidity buildup by getting all items out at one time, keeping food organized, and closing the door as soon as possible.
Is the room humid?
It is normal for moisture to build up
inside the refrigerator when the room air is humid.
Is the food packaged correctly?
Check that all food is securely wrapped. Wipe off damp food containers before placing in the refrigerator.
Are the controls set correctly for the surrounding conditions?
Was a self-defrost cycle completed?
See the Using the Controls section.
It is normal for
droplets to form after the refrigerator self-defrosts.
14
In the U.S.A.
Call the KitchenAid Customer Interaction Center toll free:
Our consultants provide assistance with:
1-800-422-1230.
Features and specifications on our full line of appliances. Installation information. Use and maintenance procedures. Accessory and repair parts sales. Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
Referrals to local dealers, repair parts distributors, and
service companies. KitchenAid designated service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in the United States.
To locate the KitchenAid designated service company in your area, you can also look in your telephone directory Yellow Pages.
For further assistance
If you need further assistance, you can write to KitchenAid with any questions or concerns at:
KitchenAid Brand Home Appliances Customer Interaction Center 553 Benson Road Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
In Canada
Call the KitchenAid Canada Customer Interaction Center toll free:
1-800-461-5681
Saturday 8:30 a.m. - 4:30 p.m. (EST).
Our consultants provide assistance with:
Features and specifications on our full line of appliances.
Referrals to local dealers.
For service in Canada
Call
1-800-807-6777.
technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to KitchenAid Canada with any questions or concerns at:
KitchenAid Canada Customer Interaction Center 1901 Minnesota Court Mississauga, Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
Monday to Friday 8:00 a.m. - 6:00 p.m. (EST).
KitchenAid Canada designated service
WATER FILTER
CERTIFICATIONS
Accessories
To order accessories, call appropriate part number listed below or contact your authorized KitchenAid dealer. In Canada, call
1-800-442-9991
1-800-807-6777
Stainless Steel Cleaner & Polish
Order Part #8171420
Base grille water filter cartridges:
NOTE: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Standard Cartridge:
Order Part #4396164 (LC 400)
and ask for the
.
15

PRODUCT DATA SHEETS

Base Grille Water Filtration System Model WF-LC400/LC400
Tested and certified by NSF International against ANSI/NSF Standard 42 for the reduction of Chlorine (Class I) Taste and Odor and against ANSI/NSF Standard 53 for the reduction of Lead, Cysts and Turbidity.
Substance Reduction Aesthetic Effects
Chlorine Taste/Odor Particulate
Contaminant Reduction
Cyst Turbidity
Lead
: @ pH 6.5
Lead
: @ pH 8.5
Capacity: Service Flow Rate:
U.S. EPA MCL
N/A N/A
U.S. EPA MCL
99.95%**
0.5 NTU
0.015 mg/L
0.015 mg/L
400 Gallons (1514 Liters)
0.5 GPM (1.89 L/min.) @ 60 psi.
Average Influent
2.0 mg/L 610,000/mL*
Average Influent
89,250/mL* 29 NTU
0.16 mg/L***
0.16 mg/L***
Maximum Effluent
N/A N/A
Maximum Effluent
6/mL
0.12 NTU
0.001mg/L
0.002 mg/L
Average Effluent
0.04 mg/L 154/mL
Average Effluent
2.3/mL
0.09 NTU
0.001 mg/L
0.001 mg/L
Minimum % Reduction
N/A N/A
Minimum % Reduction
99.993%
99.59%
99.4%
98.8%
Average % Reduction
98% 99%
Average % Reduction
99.997%
99.69%
99.4%
99.4%
NSF Test Number
994707 994711
NSF Test Number
994710 994710
994708 994709
It is essential that operational, maintenance, and filter
replacement requirements be carried out for the product to perform as advertised.
Model WF-LC400
The filter monitor system measures the amount of water that passes through the filter and alerts you to replace the filter. When 90% of the filter’s rated life is used, the filter indicator light changes from green to yellow. When 100% of the filter’s rated life is used, the filter indicator light changes from yellow to red, and it is recommended that you replace the filter. Use replacement cartridge LC400, part# 4396164. 2002 suggested retail price of $39.95 U.S.A./ $49.95 Canada. Prices are subject to change without notice.
The product is for cold water use only.
Do not use with water that is microbiologically unsafe or
■■■■
of unknown quality without adequate disinfection before or after the system.
Refer to the front cover or Assistance or Service section for
the Manufacturer’s name, address and telephone number. Refer to the “Warranty section for the Manufacturer’s limited
warranty.
Application Guidelines/Water Supply Parameters
Water Supply Water Pressure Water Temperature
30 - 120 psig (207 - 827 kPa)
33° - 100°F (0.6° - 37.8° C)
City or Well
Test requirement is at least 100,000 particles/ml of AC Fine Test Dust.
*
Cyst performance is % reduction based on NSF Standard 53.
**
Test requirement is 0.15 mg/L ± 10%. These contaminants are not necessarily in your water supply. Performance may vary based on local water
***
conditions.
® NSF is a registered trademark of NSF International.
16
Loading...
+ 36 hidden pages