Service Centers .......................................................................................................27
Customer Service ....................................................................................................28
2
Food Processor Safety
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire or electrical
shock.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you
and others.
All safety messages will follow the safety alert symbol and either
the word “DANGER” or “WARNING.” These words mean:
You can be killed or seriously injured
Danger
Warning
All safety messages will tell you what the potential hazard is, tell you how to
reduce the chance of injury, and tell you what can happen if the instructions are
not followed.
if you don’t immediately follow
instructions.
You can be killed or seriously injured
if you don’t follow instructions.
Electrical Requirements
Models 5KFPM771, 5KFPM775,
5KFPM776:
230-240 Volts A.C.
Hertz: 50 Hz
English
NOTE: Models 5KFPM771, 5KFPM775
and 5KFPM776 have a grounded plug.
To reduce the risk of electrical shock, this
plug will fit in an outlet only one way. If
the plug does not fit in the outlet, contact
a qualified electrician. Do not modify the
plug in any way.
Do not use an extension cord. If the
power supply cord is too short, have a
qualified electrician or serviceman install
an outlet near the appliance.
3
IMPORTANT SAFEGUARDS
When using electrical appliances, basic
safety precautions should always be
followed, including the following:
1. Read all instructions.
2. To protect against risk of electrical
shock do not put Food Processor in
English
water or other liquid.
3. Unplug from the outlet when not in
use, before putting on or taking off
parts, and before cleaning.
4. Avoid contacting moving parts.
5. Do not operate any appliance with a
damaged cord or plug, or after the
appliance malfunctions, or is dropped
or damaged in any manner. Return
appliance to the nearest Authorized
Service Facility for examination,
repair, or electrical or mechanical
adjustment.
6. The use of attachments not
recommended or sold by the
manufacturer may cause fire, electric
shock or injury.
7. Do not use outdoors.
8. Keep hands and utensils away
from moving blades or discs while
processing food to reduce the risk of
severe injury to persons or damage to
the Food Processor. A scraper may be
used but must be used only when the
Food Processor is not running.
9. Blades are sharp. Handle carefully.
10. To reduce the risk of injury, never place
cutting blade or discs on base without
first putting bowl properly in place.
11. Be certain cover is securely locked in
place before operating appliance.
12. Never feed food by hand. Always use
the food pusher.
13. Do not attempt to defeat the cover
interlock mechanism.
14. This product is designed for
household use only.
15. This appliance is not intended for use
by persons (including children) with
reduced physical sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
16. Children should be supervised to
ensure that they do not play with the
appliance.
17. Switch off the appliance and
disconnect from supply before
changing accessories or approaching
parts that move in use.
SAVE THESE INSTRUCTIONS
This appliance is marked according to the
European directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise
be caused by inappropriate waste handling
of this product.
The symbol
documents accompanying the product,
indicates that this appliance may not be
on the product, or on the
treated as household waste. Instead it shall
be handed over to the applicable collection
point for the recycling of electrical and
electronic equipment.
Disposal must be carried out in accordance
with local environmental regulations for
waste disposal.
For more detailed information about
treatment, recovery and recycling of this
product, please contact your local city
office, your household waste disposal
service or the shop where you purchased
the product.
4
Food Processor Features*
Work Bowl Cover
with Ultra Wide Mouth
Feed Tube
One of the industry’s
largest, the ultra wide
mouth feed tube
accommodates large items – like
tomatoes, cucumbers, and potatoes – with
a minimum of sectioning or slicing.
2-Piece Food Pusher
For smaller items, remove the
small pusher from the central
tube in the large pusher. The
small pusher and feed tube
make it easy to process herbs,
nuts, single carrots and celery. The small
pusher can also be used as a convenient
115 ml measuring cup.
2.8-Liter Work Bowl
The tough polycarbonate
bowl provides capacity for
large jobs.
Chef’s Bowl
(included only with
model 5KFPM776)
Place the 2.4 liter Chef’s Bowl
inside the Work Bowl, and
slice or shred a food item while keeping the
Work Bowl clean for another ingredient.
Mini Bowl and Mini Blade
950 ml bowl and stainless
steel blade are perfect for small
chopping and mixing jobs.
Fine (2 mm) Slicing Disc
Disc produces approximately
1.6 mm slices of most foods,
from delicate strawberries to
partially frozen meats.
Medium (4 mm) Slicing Disc
Disc produces approximately
3.2 mm slices of most foods.
Medium (4 mm)
Shredding Disc
Disc produces approximately
3.2 mm shreds of most firm
fruits, vegetables, and cheese.
Julienne Disc
(included with models
5KFPM775 and 5KFPM776)
Slices potatoes, carrots, zucchini,
summer squash, and other firm fruits and
vegetables into true 3.5 mm x 2.5 mm
julienne matchsticks.
English
* Depending on the model you have purchased, some features
shown may not be included.
5
Food Processor Features*
Disc Stem
Stem fits over the power shaft
on the base and into the bottom
of a slicing or shredding disc.
Stainless Steel
Multipurpose Blade
English
blends, mixes, and emulsifies in a matter
of seconds.
yeast dough.
and desserts.
cone for larger items, such as
grapefruit, and the inner cone
for lemons and limes.
Versatile blade chops, minces,
Dough Blade
The dough blade is specially
designed for mixing and kneading
Egg Whip
The egg whip will quickly
whip cream and egg whites for
meringues, mousses, soufflés,
Citrus Press
(included with models 5KFPM775
and 5KFPM776)
Press consists of a
Strainer Basket, 2-Piece
Cone, and Lever Arm.
Use the removable outer
Heavy-Duty Base
The base features the
“O”, “I”, and Pulse
Buttons along with the
power shaft, which
rotates the blades and discs.
Spatula/Cleaning Tool
Special shape facilitates
food removal from
bowls, discs, and blades.
Chef’s Accessory Case
Stylish and durable slim-line case organizes
and protects blades, discs, and accessories
The accessory case included with models
5KFPM775 and 5KFPM776 is designed to
hold up to five discs. If an additional disc is
purchased, it can be stored in the case with
the original four discs included with these
two models.
5KFPM7715KFPM775 &
5KFPM776
* Depending on the model you have purchased, some features
shown may not be included.
6
Preparing the Food Processor for Use
I
O
Pulse
ARTISAN
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
Before First Use
Before using your Food Processor for the
first time, wash the work bowl, work
bowl cover, chef’s bowl, mini bowl, feed
tube pushers, discs, and blades either by
hand or in the dishwasher (see “Care and
Cleaning” on page 15).
Work Bowl Assembly
1. Place the Food Processor base on a
dry, level countertop with the controls
facing forward. Do not plug in the unit
until it is completely assembled.
2. With the handle just to the left of
center, place the work bowl on the
base, fitting the center opening over
the power shaft.
3. Grasp the work bowl handle and turn
the bowl to the right until it locks
into position.
4. Insert the desired accessory into
the work bowl. See pages 8–11 for
accessory instructions.
5. Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the
feed tube and turn the cover to the
right until it locks into place.
English
NOTE: To avoid damage to the work
bowl, do not attach the cover to the work
bowl before the work bowl is locked on to
the base.
6. Fit the 2-piece food pusher into the
feed tube.
Continued on next page
7
Preparing the Food Processor for Use
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire or electrical
shock.
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
English
7. Plug into a proper electrical outlet (see
“
Electrical Requirements” on page 3).
NOTE: Your Food Processor will not
operate unless the work bowl and work
bowl cover are properly locked on the
base, and the pusher is inserted to the
maximum fill line on the feed tube.
To avoid damage to the work bowl, do
not remove the work bowl from the base
without first removing the work bowl cover.
Multipurpose Blade and
Dough Blade Assembly
Place the blade on the power shaft.
Rotate the blade so it falls into place on
the shaft.
Slicing and Shredding Disc Assembly
1. Place the disc stem on the power shaft.
8
Preparing the Food Processor for Use
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
2. Fit the disc over the metal pin on the
disc stem with the raised-blade side
up. The disc has a raised nub on the
top and grooves underneath to help
align it properly. Rotate the disc until it
falls fully onto the stem.
3. To remove the mini bowl after
processing, lift the bowl using the two
finger grips located along the top edge
of the bowl.
English
Mini Bowl Assembly
1. Place the mini bowl inside the work
bowl over the power shaft. Rotate the
mini bowl until it falls into place. When
properly seated in the work bowl, the
mini bowl cannot be rotated.
2. Fit the mini blade on the power shaft.
It may be necessary to rotate the blade
until it falls into place.The mini bowl can
also be placed in the chef’s bowl in a
similar manner.
Chef’s Bowl Assembly (5KFPM776)
Place the chef’s bowl inside the work
bowl over the power shaft. Rotate the
chef’s bowl until it falls into place. When
properly seated in the work bowl, the
chef’s bowl cannot be rotated.
The chef’s bowl can only be used with
the slicing and shredding discs – the
multipurpose blade cannot be used. To
remove the chef’s bowl after processing,
lift the bowl using the two finger grips
located along the top edge of the bowl.
Continued on next page
9
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.