Kisan 10APF User Manual

10APF

Refer to your Owners Manual or inspect
the fuse block and its cover to identify the
Turn Signal fuse.

Make sure that the fuse to replace is
dedicated to turn signals only. If not, wiring
in a separate fuse holder may be
necessary.

 Self-timing, RE-SETTABLE solid-state fuse
Time-out programmable for 10, 20 or 30 seconds

 Maximum load rating is 10A – do not exceed!
(4) x 27W bulbs @ typical 14 volts

 Overload or a short-circuit will force a shutdown – Blue LED indication
Can be reset up to (8) times

 Reverse polarity protection – Blue LED indication
Prevents damage to the bike or itself

 SPECIFICALLY DESIGNED FOR FLASHING CIRCUITS like turn
signals. Do not use it for any other purpose.

- 2