Kinivo WID320 User Manual

WID320 Wireless N USB Adapter

User Manual

p.1

Please contact [e-mail] if you need assistance or if you have any questions.
You may also visit www.kinivo.com or support.kinivo.com

WID320 Wireless N USB Adapter

User Manual

p.2

Contents

1. Product Overview 3

1.1 Pack age Contents 3

1.2 Features 3

1.3 System Requirements 4

2. Operation 4

2.1 Windows Installation (XP, Vista, 7) 4

2.2 Connecting to a wireless network (Windows 7) 9

2.3 Installing on Linux (Kernel 2.6 and newer) 12

3. Troubleshooting and FAQ 19

3.1 Nothi ng happens when the WID320 is plugged in 19

3.2 I nst alle r is not detecting the WID320 19

3.3 After selecting a wireless network, I’m unable to connect 19

3.4 I can’t see any wireless networks 19

3.5 Slo w connection speed or constantly dropped connections 19

3.6 M y connection shows a lower link speed 19

4.

Technical specifications

4.1 Hardware Features 20

4.2 W ireless Features 20

4.3 Ot h er Information 20

5. FCC statement 21

6.

Warranty

7. Contact

Please contact [e-mail] if you need assistance or if you have any questions.
You may also visit www.kinivo.com or support.kinivo.com

Us

20

22
23

WID320 Wireless N USB Adapter

User Manual

p.3

Read all safety and operation instructions before installing and using your WID320 Wireless
Adapter.

Warning: To reduce the risk of fire or electric shock, do not expose this USB adapter to water or
moisture.

Important Safety

Instructions

1. Do not expose the WID320 to liquid, moisture or areas of high humidity.

2. Do not expose the WID320 to extremely high or low temperatures.

3. Do not attempt to open or modify the WID320 in any way.

4. Always dispose of the packaging and unit in accordance with the local regulations and in
a responsible manner.

5. To avoid electronic interference and/or compatible conflicts, do not use the WID320 in
any facilities where posted notices instruct you to do so. For example: Aircraft, Military
Base, Hospital or Health Care Facilities.

6. Keep away of fire, water, and high voltage equipment’s.

7. Store the WID320 in a cool dry place.

1. Product Overview

WID320 is a 802.11n USB dongle that can allow you to connect to Wifi networks with speeds
upto 150/300 Mbps (fully compatible with 802.11b/g). It has a small form factor and can be
connected to any Windows (7, Vista), Linux or Mac computer via USB. WID320 has built-in
antenna that enhances the signal strength and throughput while consuming minimal power from
the host computer.

Please refer to this manual for installation procedure and contact us at [e-mail] if
you have any questions or concerns.

1.1 Package Contents

● WID320 Wireless N USB Adapter

● Software CD (contains driver and user manual)

1.2 Features

● Wireless N speeds up to 150/300Mbps. Please note that the actual throughput/speed
will depend on distance and other conditions.

● Backward-compatible with 802.11b/g devices.

● Wifi security modes include WEP, WPA, WPA2, and WPS

● Supports Ad-Hoc (Client to Client) and Infrastructure (AP to Client) modes.

Please contact [e-mail] if you need assistance or if you have any questions.
You may also visit www.kinivo.com or support.kinivo.com

WID320 Wireless N USB Adapter

User Manual

p.4

1.3 System Requirements

Minimum computer requirements:

● CD Drive (for driver installation). Alternatively the drivers and the manual can be
Downloaded from http://support.kinivo.com

● 733MHz CPU or faster

● 64MB Memory or higher

● Operating System
○ Windows XP or higher
○ Linux 2.6 or newer
○ Mac OS X 10.4 or newer

2. Operation

To use the WID320 Wireless-N USB Adapter, simply plug the device into an available USB slot
on the computer or laptop.

If the drivers have not been loaded previously, continue by installing the dr i v ers for your
respective operating system (see the following sections).

Note: Under normal operation, the WID320 LED indicator will turn on when plugged in. When
the adapter is in use, the LED indicator will blink.

2.1 Windows Installation (XP, Vista, 7)

Note: You will be required to restart your computer after installing.

1. Insert the Kinivo Software CD and run the setup when prompted. Alternatively, you can
download the drivers from support.kinivo.com

.

Please contact [e-mail] if you need assistance or if you have any questions.
You may also visit www.kinivo.com or support.kinivo.com

WID320 Wireless N USB Adapter

User Manual

p.5

2. Click Install to start the installation process.

Please contact [e-mail] if you need assistance or if you have any questions.
You may also visit www.kinivo.com or support.kinivo.com

WID320 Wireless N USB Adapter

User Manual

p.6

3. Accept the agreement and press Next.

Please contact [e-mail] if you need assistance or if you have any questions.
You may also visit www.kinivo.com or support.kinivo.com

WID320 Wireless N USB Adapter

User Manual

p.7

4. Click Install to continue.

Please contact [e-mail] if you need assistance or if you have any questions.
You may also visit www.kinivo.com or support.kinivo.com