Kinivo EBI-180 User Manual
Extended Battery Case EBI180
for iPhone 4S and iPhone 4
Specifications & User's Guide
Warranty
EBI180 is covered under 1 year limited
hardware warranty.
Please contact support@kinivo.com
if you need assistance or if you have
any questions.
www.kinivo.com
Email: support@kinivo.com
Product specifications
Model EBI180
Input Voltage 5.0V/1.0A(Max)
Output
Voltage
Nominal
pacity
Ca
Use for iPhone 4S, iPhone 4
Cell Type
Dimensions
Color Black
Weight 72g
5.0±0.25V/1.0A
5.8 Wh
Li-polymer
1850mAH
125
.4(±0.8)*62(±
0.8)* 16.8(±0.2)mm
Package Contents
Kinivo EBI180 Battery Case
USB power cable
User's Guide
Top part of the case (spare)
Illustrat
ion
Figure 1
LED status while charging
CHG
Capacity
LED
1 LED2 LED3 LED4
KING
BLIN
Low
25%
50%
75%
FULL ON ON ON ON
OFF OFF OFF
KING
BLIN
ON OFF OFF
KING
ON ON
ON ON ON
BLIN
LED status during regular use
Capacity
DCHG
1 LED2 LED3 LED4
LED
ON ON ON ON
Full
75%
ON ON ON OFF
ON ON OFF OFF
50%
25%
ON OFF OFF OFF
Empty OFF OFF OFF OFF
BLIN
OFF
KING
* Kinivo is a trademark of Kinivo LLC.
“Made for iPhone” means that an electronic
accessory has been designed to connect
specifically to iPhone and has been certified by
the developer to meet apple performance
standards
Apple is not responsble for the operation of this
device or its compliance with safety and
regulatory standards. Please note that the use
of this accessory with iPhone may affect
wireless performance.
iPhone is a trademark of Apple Inc., registered
in the US and other countries.
1 year warranty
www.kinivo.com
Contact: support@kinivo.com
Figure 2
Figur
e 3
talling iPhone into battery case
Ins
Gently pull and remove the top part of the
case (fig 2)
Slide iPhone into the battery part of the
case (fig 3)
Close the top part of the case
:
Notes
The iPhone will automatically stop charging
when the battery in the case has been
used up.
Use the included USB cable to charge and
sync the iPhone in the battery case
Charging EBI180 battery case
Connect the battery case to the included
USB charging cable.
Connect the USB end of the cable to any
USB charger or a computer's USB port.
This will start charging the battery case. It
will also charge the iPhone if it is installed
inside.
Note: The case can be charged with or
without the iPhone installed inside it.
Charging iPhone with EBI180
Press and hold on/off button (about 3 Sec)
to charge your iPhone from EBI180’s
battery.
Press and hold on/off button again (about 3
Sec) to power off the battery case when
iPhone is fully charged. This can save the
capacity of the built in battery for future use.
Press and release the on/off button to
check the EBI180's battery status.
2 3 4 5 6
Loading...