Kingston KVR800D2S5K24G User Manual

Memory Module Specification

KVR800D2S5K2/4G

4GB (2GB 256M x 64-Bit x 2 pcs.) DDR2-800

CL5 200-Pin SODIMM Kit

DESCRIPTION:

ValueRAM's KVR800D2S5K2/4G is a kit of two 256M x 64-bit 2GB (2048MB) DDR2-800
CL5 SDRAM (Synchronous DRAM ) memory modules. Total kit capacity is 4GB (4096MB).
The components on each module include sixteen 128M x 8-bit DDR2-800 SDRAM in FBGA
packages. Each 200-pin SODIMM uses gold contact fingers and requires +1.8V. The electrical
and mechanical specifications are as follows:

FEATURES:

Clock Cycle Time (tCK) CL=5 2.5ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 57.5ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 127.5ns
Row Active Time (tRAS) 45ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 1.584 W (operating per module)
UL Rating 94 V - 0

Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).

(units = millimeters)

Figure 1: KVR800D2S5K2/4G 200-Pin SODIMM

Document No. VALUERAM0642-001.A00

03/18/08