Kingston KVR800D2S51GBK User Manual

Memory Module Specification

KVR800D2S5/1G

1GB 128M x 64-Bit DDR2-800

DESCRIPTION:

This document describes ValueRAM's 128M x 64-bit 1GB (1024MB) DDR2-800 CL5
SDRAM (Synchronous DRAM) memory module. The components on this module include
sixteen 64M x 8-bit DDR2-800 SDRAM in FBGA packages. This 200-pin SODIMM uses
gold contact fingers and requires +1.8V. The electrical and mechanical specifications are as
follows:

FEATURES:

Clock Cycle Time (tCK) CL=5 2.5ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 57.5ns (min.)
Refresh to Active/Refresh Command Time (tRFC) 105ns
Row Active Time (tRAS) 45ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 1.800 W (operating)
UL Rating 94 V - 0

CL5 200-Pin SODIMM

Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 30mm.

(units = millimeters)

Figure 1: KVR800D2S5/1G 240-Pin SODIMM

Document No. VALUERAM0543-001.A00

02/07/07