King Canada KAC-410 Instruction Manual

COPYRIGHT ©

2009

ALL

RIGHTS RESERVED BY KING CANADA TOOLS INC.

PORTABLE AIR CLEANER

WITH REMOTE CONTROL

INSTRUCTION MANUAL

MODEL: KAC-410

WARRANTY INFORMATION

2-YEAR

LIMITED WARRANTY

FOR THIS AIR CLEANER

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARRANTY

FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

REPLACEMENT PARTS

Replacement parts for this product are available at our authorized King Canada
service centers across Canada.

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product meets high quality and
durability standards. King Canada warrants to the original retail consumer a 2-year
limited warranty as of the date the product was purchased at retail and that each
product is free from defects in materials. Warranty does not apply to defects due
directly or indirectly to misuse, abuse, normal wear and tear, negligence or
accidents, repairs done by an unauthorized service center, alterations and lack of
maintenance. King Canada shall in no event be liable for death, injuries to persons
or property or for incidental, special or consequential damages arising from the use
of our products.

To take advantage of this limited warranty, return the product at your expense
together with your dated proof of purshase to an authorized King Canada service
center. Contact your retailer or visit our web site at www.kingcanada.com for an
updated listing of our authorized service centers. In cooperation with our authorized
serviced center, King Canada will either repair or replace the product if any part or
parts covered under this warranty which examination proves to be defective in
workmanship or material during the warranty period.

PARTS DIAGRAM & PARTS LISTS

Refer to the Parts section of the King Canada web site for the most updated parts
diagram and parts list.

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4

www.kingcanada.com

SPECIFIC SAFETY INSTRUCTIONS

FOR AIR CLEANERS

1. FOR YOUR OWN SAFETY, READ
INSTRUCTION MANUAL BEFORE
OPERATING. Learn the tool’s application

and limitations as well as the specific
hazards peculiar to it.

2.

DO NOT ATTEMPT TO REMOVE OR
REPLACE THE FILTER(S) WHILE THE
MACHINE IS IN OPERATION. MAKE
SURE AIR CLEANER IS DISCONNECTED
FROM THE POWER SOURCE.

3. DO NOT OPERATE THE AIR CLEANER
WITHOUT THE FILTERS IN PLACE TO
AVOID EXPOSURE TO ROTATING
PARTS AND OVERLOADING THE
MOTOR.

4. THE USE of filters and attachments
which are not recommended may result
in product damage or the risk of
personal injury.

5. When suspending the Air Cleaner from
the ceiling

MAKE CERTAIN the

hardware is securely anchored into a
wood structure. Always keep a minimum
of 7 feet between bottom of Air Cleaner
and the floor surface to allow for
adequate head clearance. Also, use only
properly sized chain to prevent the tool
from falling.

6.

TO REDUCE THE RISK OF

ELECTRICAL SHOCK,

do not expose to

water or rain, and do not lift the Air
Cleaner by the power cord. DO NOT use
the power cord as a hanging device.

7. When used in the portable application,
MAKE CERTAIN the Air Cleaner is
adequately supported, or securely
clamped to the work surface to eliminate
any potential for movement or damage
from falling.

8.

ALWAYS WEAR ADEQUATE EYE

PROTECTION.

9. WHEN NOT IN USE, BE CERTAIN TO
STORE AIR CLEANER IN A SAFE
LOCATION TO ELIMINATE THE
POTENTIAL OF DAMAGE TO THE
POWER CORD OR TRIPPING
HAZARDS.

10. MAKE WORKSHOP CHILDPROOF by

unplugging tools from power source,
using padlocks, or by using a master
switch.

11.

MAINTAIN TOOLS IN TOP

CONDITION. Keep filters clean for

optimum performance. Follow
instructions for changing and cleaning
filters.

12.

DANGER: DO NOT use this machine to

filter any metal dust. Combining wood
and metal dust can create an explosive
hazard. This Air Cleaner is intended to be
used to filter non-explosive atmospheres
only.

13.

IF YOU ARE NOT thoroughly familiar

with the operation of the Air Cleaner,
obtain advice from your supervisor,
instructor or other qualified person.

14.

WARNING: DO NOT operate your Air

Cleaner until it is completely assembled
and installed according to the instruction
manual.

15.

PLACE POWER CORD IN A SAFE
LOCATION TO ELIMINATE TRIPPING
HAZARDS.

16. USE FACE OR DUST MASK AND EYE
PROTECTION. WARNING: The dust

generated by certain woods and wood
products can be hazardous to your
health. Always operate machinery in
well-ventilated areas and provide for
proper dust removal.

17.

WARNING: TOAVOID A POTENTIALLY
DANGEROUS SITUATION, DO NOT
USE AIR CLEANER TO DISSIPATE
FUMES OR SMOKE.

This Air Cleaner is
intended for use in non-explosive,
non-metallic atmospheres where only dry
airborn dust is present.

18.

SAVE THESE INSTRUCTIONS. Refer

to them frequentely and use them to
instruct other users.

SPECIFICATIONS &

ELECTRICAL INFORMATION

Specifications

Outer filter ................................................................................................5 Microns

Inner filter ..................................................................................................1 Micron

Overall dimensions (LxWxH)............................................................21” x 17” x 11”

Sound rating @ 3ft. ....................................................................High speed- 69db

..............................................................................................Medium speed- 67 db

....................................................................................................Low speed- 62 db

Air flow. ................................................................................High speed- 410 CFM

........................................................................................Medium speed- 362 CFM

..............................................................................................Low speed- 260 CFM

Motor......................................................................................120V, 60Hz, 1 Phase

Weight ..........................................................................................................30 lbs.

GROUNDING

This air cleaner must be grounded. If it
should malfunction or breakdown,
grounding provides a path of least
resistance for electric current, to reduce the
risk of electric shock. This air cleaner is
equipped with a cord having an equipment­grounding conductor and grounding plug.
The plug must be plugged into an
appropriate outlet that is properly installed
and grounded in accordance with all local
codes and ordinances.
WARNING: TO MAINTAIN PROPER
GROUNDING, DO NOT REMOVE OR
ALTER THE GROUNDING PRONG IN ANY
MANNER.

As received from the factory, your air
cleaner is ready to run on 120V currant.
This air cleaner is intended for use on a
circuit that has an outlet and a plug which
looks like the one illustrated in Fig.1.

A separate electrical circuit should be used
for your tools. This circuit should be no less
than than #12 wire and should be protected
with a 20 amp fuse. Make sure the electric
current is of the same characteristics as
stamped on the machine nameplate.
Running on low voltage will damage the
motor.

THERMAL PROTECTOR

This air cleaner is thermally protected. In
the case of an overload the fuse will blow

and will need to be replaced with an
equivalent 2 amp. fuse.

EXTENSION CORDS

The use of any extension cord will cause
some loss of power. Use the following table
to determine the minimum wire size
(A.W.G-American Wire Gauge) extension
cord needed. Use only extension cords
which accept the tool’s plug.

For circuits that are further away from the
electrical circuit box, the wire size must be
increased proportionately in order to
deliver ample voltage to the motor. Refer to
Fig.2 for wire length and size.

Figure 1

Current
carrying
prongs

Grounded outlet

Grounding
prong

Figure 2

REQUIRED GAUGE

(AWG) 120V LINES

NO.16
NO.16
NO.14

EXTENSION

LENGTH

0-25 Feet

26-50 Feet

51-100 Feet