King Canada K-2750 Instruction Manual

COPYRIGHT ©

2010

ALL

RIGHTS RESERVED BY KING CANADA TOOLS INC.

UNIVERSAL POWER TOOL

WORKSTATION

INSTRUCTION MANUAL

MODEL: K-2750

WARRANTY INFORMATION

2-YEAR

LIMITED WARRANTY

FOR THIS UNIVERSAL WORKSTATION

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARRANTY

FOR NON-COMMERCIAL USE.

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

LIMITED TOOL WARRANTY

King Canada makes every effort to ensure that this product meets high quality and
durability standards. King Canada warrants to the original retail consumer a 2-year
limited warranty as of the date the product was purchased at retail and that each
product is free from defects in materials. Warranty does not apply to defects due
directly or indirectly to misuse, abuse, normal wear and tear, negligence or
accidents, repairs done by an unauthorized service center, alterations and lack of
maintenance. King Canada shall in no event be liable for death, injuries to persons
or property or for incidental, special or consequential damages arising from the use
of our products.

To take advantage of this limited warranty, return the product at your expense
together with your dated proof of purshase to an authorized King Canada service
center. Contact your retailer or visit our web site at www.kingcanada.com for an
updated listing of our authorized service centers. In cooperation with our authorized
serviced center, King Canada will either repair or replace the product if any part or
parts covered under this warranty which examination proves to be defective in
workmanship or material during the warranty period.

KING CANADA INC. DORVAL, QUÉBEC, CANADA H9P 2Y4

www.kingcanada.com

1. KNOW YOUR TOOL

Read and understand the instruction manual and labels affixed to the tool. Learn its
application and limitations as well as its specific potential hazards.

2. USE RIGHT TOOL.

Don’t force the tool or the attachment to do a job for which it was not designed.

3. WEAR PROPER APPAREL.

Do not wear loose clothing, gloves, neckties or jewelry (rings, watch) because they could
get caught in moving parts. Non-slip footwear is recommended. Wear protective hair
covering to contain long hair. Roll up long sleeves above the elbows.

4. MAINTAIN TOOL WITH CARE.

Keep tool clean for best and safest performance. Follow instructions for operation and
changing accessories.

5. DISCONNECT TOOLS.

Before servicing, when changing accessories or attachments.

6. USE RECOMMENDED ACCESSORIES.

Consult the manual for recommended accessories. Follow the instructions that
accompany the accessories. The use of improper accessories may cause hazards.

7. CHECK FOR DAMAGED PARTS.

Before further use of the tool, a guard or other parts that are damaged should be
carefully checked to ensure they will operate properly and perform their intended
function. Check for alignment of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard or other parts which are damaged
should be properly repaired or replaced.

SPECIFIC SAFETY INSTRUCTIONS

Read the following safety instructions before attempting to assemble or use this product.

1. Always select a level surface, free from obstructions, when working with power tools.

2. Secure power tools to the table top before starting work.

3. Always wear ANSI approved safety goggles when using any power tool.

4. When folding or unfolding stand, be careful not to pinch your fingers.

5. Make sure all supports are in line with work surfaces.

6. Work extensions and supports must be adjusted within safe operating limits and

locked into place before operating any power tool on the workstation.

7. When working with long or heavy workpieces use additional supports.

8. Test your set-up for stability before each use.

9. Always make sure adjustment keys and wrenches are removed from the work table

before operating any power tool on the workstation.

10. Keep work area clean and uncluttered, also keep children away while setting-up

and/or operating power tools.

11. Check for alignement and binding of moving parts, broken parts or other

conditions which may affect safe operation. Any damaged part should be repaired or
replaced by a qualified technician.

12. Only use identical replacement parts when servicing.

GENERAL & SPECIFIC

SAFETY INSTRUCTIONS

GETTING TO KNOW

YOUR WORKSTATION

1. Folding workstation leg

2. Folding leg spring locking pin

3. Roller support bracket

4. Roller support bracket lock knob

5. Roller support with work stop

6. Height adjustment lock knob

7. Extension

8. Extension lock knob

9. Quick mount vise

10. Power tool mounting hardware

11. Quick mount support

12. Aluminum bed

13. Work light

14. Work light quick mount support

15. 4 Power outlets (120V)

16. Storage compartment

17. 8” wheel

SPECIFICATIONS

Model ......................................................................................................................K-2750

Working height ..............................................................................................................32”

Minimum extension........................................................................................................68”

Maximum extension ....................................................................................................114”