SUPER BRIGHT GREEN
3.5x2.8mm SURFACE MOUNT LED LAMP
P/N: KAA-3528SRSGC SUPER BRIGHT RED
Features
BOTH CHIPS CAN BE CONTROLLED SEPARATELY.
SUITABLE FOR ALL SMT ASSEMBLY AND
SOLDER PROCESS.
AVAILABLE ON TAPE AND REEL.
PACKAGE: 1500PCS / REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 4.
RoHS COMPLIANT.
Package Dimensions
Description
The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.
The Super Bright Green source color devices are made with
Gallium Phosphide Green Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subjected to change without notice.
SPEC NO: DSAB6996 REV NO: V.4 DATE: MAR/02/2006 PAGE: 1 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG
Selection Guide
Viewing
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
Min. Typ.
Angle [1]
2θθθθ1/2
KAA-3528SRSGC
SUPER BRIGHT RED (GaAlAs)
WATER CLEAR
50 150
SUPER BRIGHT GREEN (GaP) 4 20
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/
-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak
λD [1]
∆λ1/2
Peak Wavelength
Dominant Wavelength
Spectral Line Half-width
C Capacitance
VF [2] Forward Voltage
IR Reverse Current
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Super Bright Red
Super Bright Green
Super Bright Red
Super Bright Green
Super Bright Red
Super Bright Green
Super Bright Red
Super Bright Green
Super Bright Red
Super Bright Green
Super Bright Red
Super Bright Green
660
565
640
568
20
30
45
15
1.85
2.2
2.5
2.5
10
10
nm IF=20mA
nm IF=20mA
nm IF=20mA
pF VF=0V;f=1MHz
V IF=20mA
uA VR = 5V
120°
Absolute Maximum Ratings at T
Parameter Super Bright Red Super Bright Green Units
Power dissipation 75 62.5 mW
DC Forward Current 30 25 mA
Peak Forward Current [1] 155 140 mA
Reverse Voltage V
Operating/Storage Temperature -40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAB6996 REV NO: V.4 DATE: MAR/02/2006 PAGE: 2 OF 4
APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG
A=25°C
5
Loading...