KINGBRIGHT DSAD3603 User Manual
8mm BLINKING LED LAMP
Part Number: L-796BID HIGH EFFICIENCY RED
Features
z8mm DIAMETER BIG LAMP WITH BUILT-IN
BLINKING IC.
zOPERATION VOLTAGE FROM 3.5V to 14V.
zBLINKING FREQUENCY FROM 3.0Hz to 1.5Hz.
zRoHS COMPLIANT.
Package Dimensions
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAD3603 REV NO: V.5 DATE: APR/07/2007 PAGE: 1 OF 3
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU
Selection Guide
V
Part No.
Dice Lens Type
L-796BID HIGH EFFICIENCY RED (GaAsP/GaP) RED DIFFUSED
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Iv (mcd)
V=9V
Min. Typ.
18 60
iewing
Angle
2 θ 1/2
60°
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Min. Typ. Max. Units Test Conditions
λpeak
λD
Δλ1/2
IF Forward Current High Efficiency Red 8 22 mA
ISON Supply Current High Efficiency Red 8 mA VF = 3.5V
Peak Wavelength High Efficiency Red 627 nm
Dominant Wavelength High Efficiency Red 625 nm
Spectral Line Half-width High Efficiency Red 45 nm
Min:VF=3.5V
Typ:V
F=5V
ISON Supply Current High Efficiency Red 44 mA VF = 14V
f Blink Frequency High Efficiency Red 1.5 3 Hz VF = 3.5V~14V
Absolute Maximum Ratings at T
A=25°C
Parameter High Efficiency Red Units
Power dissipation 310 mW
Forward Voltage 14 V
Reverse Voltage 0.5 V
Operating Temperature -40°C To +70°C
Storage Temperature -40°C To +85°C
Lead Solder Temperature [1] 260°C For 3 Seconds
Lead Solder Temperature [2] 260°C For 5 Seconds
Notes:
1. 2mm below package base.
2. 5mm below package base.
SPEC NO: DSAD3603 REV NO: V.5 DATE: APR/07/2007 PAGE: 2 OF 3
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU
Loading...