Kindermann 7488000300, Klick+Show TOUCH T1 Transmitter, Klick & Show K-10S Kit, 7488000301, Klick & Show K-10S Installation And User Manual
1
Wireless Presentation Solution
Ref.-No. 7488000300, 7488000301
Installation and User Manual
Release: Firmware 2.0.6
GB - 11.2017
2
Overview
Kindermann Klick & Show makes connecting or participate in a meeting by a most simple way, clicking a button.
It also allows the other to join in the meeting more actively. The result is to make the meeting more efficient and
productive. The Content is transmitted via WLAN from the mobile transmitters or mobile devices to the Baseunit. Additionally a HDMI Signal can be directly attached to the Base-unit.
The Klick & Show K-10S Kit (7488000300) contains of one Base-unit and two Senor-buttons TOUCH
(7488000301). Additional Sensor-buttons TOUCH (7488000301) are available.
The current version of this manual can also be downloaded from the website www.klickandshow.com.
Contents Klick & Show K-10S Kit (7488000300)
1 x Kindermann Klick & Show Base-unit
2 x Antenna (The antenna can rotate for an optimal wireless connection)
2 x Wireless Klick & Show Sensor-buttons TOUCH
1 Universal power-supply 100 – 240 VAC, 12 VDC/2A, with different adapters
1 Mounting set for installation at wall
1 Quick-start-guide
Main features
Wireless transmission of Windows or Mac laptops / PCs to a central screen
Can transmit PC’s mirror/extended desktop or Macbook's mirror desktop to the Base-unit
Can transmit smart devices' mirror, photos, videos, music etc.
Transmits USB-HID (f.e. mouse) for interactive units (Touch-displays, interactive WhiteBoards)
Support VESA PC resolution input, auto-detecting
Support remote mouse to control the active source devices from other smart devices (REMOTE Control)
Can remote monitoring the active display on screen from smart devices (REMOT View)
Support "Airplay" for apple device
External HDMI-Input at Base-Unit for cable-linked connection to another video-source (document camera, DVD, …)
Sensor-buttons TOUCH
Sensor-button with "Show-me" function with fast signal switching (app. 1s)
Status display with colored LEDs:, green indicates active source signal, red indicates power/link.
Support USB plug-in auto configuration/pairing at Base-Unit
“Show-me" button can independently step in/out the source of PC
3
Accessory:
Klick+Show TOUCH T1 Transmitter (7488000301)
Sensor-button for expansion of Klick & Show K-10S Kit
Safety instructions
Please read the instructions carefully and store them
The Kindermann Klick & Show K-10S can only be operated with a safety low voltage via the associated
power supply unit
The device must only be stored and used in a dry, closed environment without mechanical stress
Install the unit in a place with adequate ventilation
Do not use any liquids or thinners for cleaning (remove the power supply beforehand!)
Remove the power supply for long periods of non-use
The use of unsuitable accessories may result in damage or malfunction
Please observe the safety instructions of the devices to be connected
Catalogue
1. Overview .......................................................................................................................................................... 6
2. Hardware Interface .................................................................................................................................... 7
2.1 Connections and Buttons .......................................................................................................................... 7
2.1.1 Front Panel ...................................................................................................................................... 7
2.1.2 Rear Panel ....................................................................................................................................... 8
2.1.3 Sensor-Button TOUCH ................................................................................................................ 11
2.2 User Interface ....................................................................................................................................... 12
2.2.1 Home Page ................................................................................................................................... 12
3. Installation Klick & Show ............................................................................................................................ 16
3.1 Installation methods for the Base-unit.............................................................................................. 16
3.2 Wiring diagram ..................................................................................................................................... 18
3.3 Power Connection ................................................................................................................................ 18
WARNING
4
3.4 Video connection ................................................................................................................................. 19
3.5 Audio Connection ................................................................................................................................ 19
3.6 LAN connection .................................................................................................................................... 20
3.7 Usage of USB devices .......................................................................................................................... 22
4. Starting-up of Klick & Show ....................................................................................................................... 23
4.1 Mobile units: Wireless Connection .................................................................................................... 23
4.1.1 Enable portable hotspot: ............................................................................................................. 23
4.1.2 Enable LAN Connection: .............................................................................................................. 24
4.2 Pairing Sensor-button with Base-unit ............................................................................................... 25
4.3 Mirroring of the desktop..................................................................................................................... 26
4.3.1 PC / Laptop ................................................................................................................................... 26
4.3.2 Mobiles .......................................................................................................................................... 26
5. Menu “General setting ................................................................................................................................ 29
5.1 Ethernet ................................................................................................................................................. 30
5.1.1 IP address ...................................................................................................................................... 30
5.1.2 Ethernet MAC address ................................................................................................................. 30
5.1.3 Proxy & IP settings ....................................................................................................................... 30
5.1.4 PPPoE settings .............................................................................................................................. 31
5.2 Tethering & portable hotspot ............................................................................................................ 31
5.2.1 Portable Wi-Fi hotspot ................................................................................................................ 31
5.2.2 Show WLAN-name and password ............................................................................................. 31
5.2.3 Set up Wi-Fi hotspot .................................................................................................................... 32
5.2.4 Auto change Wi-Fi hotspot password ....................................................................................... 33
5.2.5 Wi-Fi analyzer ............................................................................................................................... 34
5.3 General settings ................................................................................................................................... 37
5.3.1 Automatic creation of Starter-program .................................................................................... 37
5.3.2 Auto Standby ................................................................................................................................ 37
5.3.3 Airplay screen quality .................................................................................................................. 37
5.3.4 HDMI output resolution .............................................................................................................. 37
5.3.5 Background image Home screen ............................................................................................... 38
5.3.6 Volume .......................................................................................................................................... 38
5.4 Security setting ..................................................................................................................................... 38
5
5.4.1 LAN discovery & Connection ..................................................................................................... 38
5.4.2 Remote view lock ......................................................................................................................... 38
5.4.3 Clear History after meeting ......................................................................................................... 38
5.4.4 Change admin password............................................................................................................. 39
5.5 Language ............................................................................................................................................... 39
5.6 System Update ..................................................................................................................................... 39
5.7 Date & Time .......................................................................................................................................... 39
5.8 About Device ........................................................................................................................................ 39
6. System Firmware-Update............................................................................................................................ 40
6.1 Check current firmware information of: ............................................................................................ 40
6.2 Upgrading Firmware Base-unit .......................................................................................................... 41
6.3 Upgrading Sensor-button TOUCH .................................................................................................... 44
6.4 Software update of Starter-Program ................................................................................................. 45
6.5 Clean left files of older versions of Starter-program in Laptop ..................................................... 47
7. Operation Guide for Klick & Show ............................................................................................................ 48
7.1 Transmitting PC desktop ..................................................................................................................... 48
7.1.1 Microsoft Windows PC / Laptop ................................................................................................ 48
7.1.2 Mac OS PC/Laptop ....................................................................................................................... 50
7.2 Transmitting iOS mobile device ......................................................................................................... 52
7.2.1 How to use airplay? ..................................................................................................................... 52
7.2.2 App “WirelessMedia” for iOS ...................................................................................................... 52
7.3 Transmit Android device wireless ...................................................................................................... 57
7.3.1 “WirelessMedia” Apk for Android .............................................................................................. 57
7.4 HDMI Input Select ................................................................................................................................ 60
8. Specification Klick & Show ......................................................................................................................... 61
9. Trouble Shooting ......................................................................................................................................... 63
6
1. Overview
ID
Name
Description
1
Klick & Show Base-Unit
Host / Base-unit with WiFi receiver
2
Sensor-button TOUCH
Sensor-button with WiFi transmitter for PC/Laptop to share
the desktop/extended desktop
3
WirelessMedia for
Android
APP for smart android devices to share the screen, transmit
photos/music/video/files, exchange files, remote view and
review mouse.
4
WirelessMedia for IOS
APP for smart IOS devices to share the screen, transmit
photos/music/video/files, exchange files, remote view and
review mouse.
Action chart:
7
2. Hardware Interface
2.1 Connections and Buttons
Overview
Front panel
Rear Panel
Sensor-button TOUCH
2.1.1 Front Panel
ID
Name
Description
1
Front USB connector
USB port, for Klick & Show TOUCH pairing, mouse control, USB
touch screen etc.
2
POWER button and back-lit LED
indicator
Unit ON/OFF with green status-LED ON/OFF/FLASHING
(STANDBY)
USB port
To be able to use a Sensor-button it should be paired to the Base-unit you are using. Insert the Sensor
button to an USB port of the Base-unit you are using. If necessary, the Firmware of the button is automatically
updating. Follow the instructions at screen.
Other functions of USB-port.
The USB port is used to update the software of Klick & Show.
The USB port is used for connecting a mouse to:
1. Navigate in the SETTING configuration
2. Control a PC desktop that is mirroring to the screen by using the Sensor-button TOUCH
3. Control a PC desktop that is connected to the local HDMI Input
8
Instead of a Mouse also a local connected touch Screen can be used
Via this USB Port you can create a USB Stick containing the Starter-Program-Software for the Sensor-button
TOUCH
POWER button
The button at the front of the Base-unit has a power on/off function once the Base-unit is powered.
Pressing the Button switches the unit on and off (takes a few seconds each).
2.1.2 Rear Panel
ID
Name
Description
1
DC Power socket
Connect the included power adapter DC 12V/2A to this socket,
and connect the plug to an available electrical outlet
2
LAN
Connect an Ethernet cable between this jack and a LAN to
connect the Base-unit to LAN; PoE ready
3
USB port
USB port, for pairing Sensor-button TOUCH, mouse control, USB
touch screen etc.; same functions as front-USB
4
Reset
for restoring the factory default setting
5
HDMI OUT
To connect an HD or 4K/HDMI2.0 output device
6
LINE OUT
2 channel analog audio output. Connect a 3.5 mm mini-jack PC
connector from this jack to the Line In jack of an audio system.
7
HDMI IN
Connect an local HDMI input, up to 4K_60Hz, HDCP2.2 source
device
8
LINE IN
2 channel analog audio input is active, when it detects no audio
signal in HDMI IN, like DVI-Input. Connect a 3.5 mm mini-jack
PC connector from this jack to the Line Out jack of an external
audio source devices.
9
ANT.
Screw up the included two antennas to these two ports
9
Reset button
On pressing the Reset button, a program restart is initiated at Base-unit.
Start up the Base-unit.
When the Home Page is shown up, press the reset button at the rear panel of Base-unit. Press this button
with a pointed object, e.g. an unbent paper clip, until the factory reset page is shown up as below, for at least
2 seconds.
Use a mouse to connect to Base-unit and click Factory Reset. The Base-unit will reboot after 3 seconds to be
default configuration. All previous settings will be lost and you will need to do the set-up once more.
Or click Cancel to return.
After Reset, all Sensor-buttons must be paired again to Base-unit, because SSID has changed (see chapter
4.2).
Default Configuration
Ethernet
Proxy: None
IP setting: DHCP
Tethering & portable hotspot
Portable Wi-Fi hotspot: ON
SSID: WMB-****,
Security: WPA2 PSK
Frequency: 5GHZ
Channel: 40Hz
10
Settings
Airplay quality: High
output Resolution: 1920x1080_60Hz,
Background image: standard
Volume: 100
Security setting
LAN connection: Disable mobile devices can discover/connect the Base-unit in same LAN
Presenter Lock: Disable remote view the main screen from mobile device application
Language: English
Date & time
automatic date & time: use network-provided time
Mechanical fixture points
Brackets for wall-mounting are in delivery. The mechanical fixture points are located at the bottom of the Baseunit. Wall-mounting see chapter 3.1.
11
2.1.3 Sensor-Button TOUCH
The Klick & Show Sensor-button TOUCH is a dongle, which is used for extending or mirroring the desktop from a
personal PC or MAC desktop to the Base-unit and the main screen in a meeting.
ID
Name
Description
1
USB connector
- To connect to an USP-port of a PC/Laptop ( for sharing
your screen) or
- pairing the Button to the Base-unit or
- for Updating its software)
2
Sensor-button
TOUCH
Touch-function with tactile response,
for switching On and Off the presentation of the screen
3
Status LED
Indicates the status of the button
4
USB-Stick
USB-Stick with Starter-program„WirelessMedia.exe“ for
copying of to PC or MAC
Status LED
LED indicator is static green: ready to transmit a picture, waiting on USER for touch.
LED indicator is static red: 1. Transmits a picture,
2. Pairing is done (at the Base-unit). You can now unplug the Button
from the Base-unit.
LED indicator is flashing green: 1. The button is plugged in the laptop and initializing,
2. Pairing/software upgrading of the button in the Base-unit is in
progress.
LED indicator is Off: the button is not plugged in the PC/Laptop, defective or
USB port or computer might be defective.
12
2.2 User Interface
2.2.1 Home Page
Connect a mouse to either USB port to navigate in the menu. The default password for entering is “admin”.
ID
Name
Description
1
SSID
Service Set Identifier: WIFI name of the Base-unit hotspot
2
PASS
WIFI password of Base-unit
3
WiFI IP
LAN IP
WIFI IP-address of Base-unit in wireless Lan
IP-address of Base-unit in Lan
4
Create Starterprogram
Copy Start-program „WirelessMedia.exe“ to USB-stick
5
Info
Show status-bar 1,2,3 in Home-screen
6
HDMI Input
Click to selection switch the local HDMI input
7
Setting
Here you can change the system settings
8
Help (?)
User manual in PDF format
13
9
Windows /MacOS
Quick Start
Steps to instruct how to transmit with Laptop / Mac,
First-time-user must copy and execute one time the
Starter-program to Laptop / Mac
10
Android/IOS
Quick Start
Steps to instruct how to transmit smart mobile devices
either powered by Android or IOS, onto the main screen.
First-time-user must download the APP from appropriate
Store (scan OCR code)
WiFI-network name (SSID) + password
To connect the Hotspot of Klick & Show Base-unit by Wi-Fi.
Note:
if it shows “N/A”, please click the Setting page, find Tethering & Portable hotspot and check on the Portable Wi-Fi
hotspot.
Password
Authentication with a password secures the connection of wireless Lan for authorized users only. To avoid that a
participant of last meeting can view an actual meeting with the APP “Remote View” of WirelessMedia, the WiFi
password will change on a certain configurable time, unless at least one button is connected to the Base-unit –
see chapter 5.2.4.
LAN IP
It shows the IP address in the LAN (Local Area Network).
Note:
when it shows “N/A”, means the Base-unit is not connected to the LAN by by CAT cable or it failed to get an
available IP address by the corporation router.
WiFi IP
It shows the WiFi-address in the network.
HDMI Input
Click this button to toggle the local HDMI input on the Klick & Show
14
Main menu settings
User shall use the USB connected mouse or the Remote Mouse function in the APP for Android „WirelessMedia”
Apk or “WirelessMedia for IOS” APP”. It is always recommended to have a USB-mouse connected to the Baseunit. If necessary, use a wireless mouse.
It includes the sub-menu as below:
Ethernet
Tethering & Portable hotspot
General setting
Security setting
Language & input
System Update
Date & Time
About Device
Help
User Manual.
The current version of this manual can also be downloaded from the website www.klickandshow.com.
Klick & Show TOUCH quick-to-start steps
When you are using Klick & Show for the first time on your laptop of for guests, you have to copy the Starterprogram “WirelessMedia“ first on your Laptop / PC. Run this Starter-program.
Note:
You do not need Admin-rights for installing the Starter-program.
When the Starter-program is pre-installed one time, Klick & Show is ready to use, continue with Step 5.
There are 4 possibilities for loading and executing the App “WirelessMedia-windows.exe“ for Windows or
„WirelessMedia-macOS.app“ for MAC:
1. Copy the APP from integrated USB-stick of Sensor-button TOUCH on PC, continue with 5.
2. Download APP from Internet www.klickandshow.com , continue with 5.
3. Download the APP via LAN or WiFI of Base-unit, use IP-addresses in status-bar of Home screen, continue
with 5.
4. Store APP on a USB-stick at Base-unit: plug a USB-stick to USB port of Base-unit and copy Start-program
„WirelessMedia.exe“ to USB-stick by clicking on symbol .
15
Copy Starter-program at a USB-stick on Base-unit.
5. Plug the Sensor-button TOUCH into your PC/Laptop via USB.
6. Wait until LED indicator is static green.
7. Touch Sensor-button to show your screen: LED is static red.
8. Touch Sensor-button again, to stop transmission: LED is static green.
Smart mobile devices quick-to-start steps
1. Download APK/APP namely “WirelessMedia” from appropriate store (use OCR-code).
2. Connect your mobile device with the wireless network of Base-unit.
3. Open the application and click “Mirror” to show your mobile screen. Further functions see section 7.2, 7.3.
16
3. Installation Klick & Show
Overview
Installation methods for the Base-unit
Table mounting
Wall mounting
Antenna placement and orientation
Wiring Diagram
Power Connection
Video Connection
Audio Connection
LAN Connection
USB Connection
3.1 Installation methods for the Base-unit
The Base-unit can be placed on a table in meeting room or be mounted on the wall.
Mounting on ceiling is not allowed!
The antennas are removable. They can rotate or tilt for better wireless connection.
Note:
For optimum function, install the Base-unit near monitor. Avoid obstacles between Sensor-button TOUCH and
Base-unit.
Necessary tools
• A drill (type of drill depends on the type of wall/table)
• Flat screwdriver
• Additional screwdriver that matches the mounting screws (mounting screws not included in the package).
Necessary parts
• 2 mounting screws (the head of the screw has to be smaller than the whole of the bracket)
• 2 plugs fitting to Wall and Screws
• 2 mounting bracket (included in the box).
How to install
1. Drill two holes in the wall as indicated on the drawing. Horizontal distance: 177 mm ± 0.15.
2. At the bottom of Base-unit, place the bracket on the 4 holes and turn in 4 delivered flat screws to be fasten
17
enough.
3. Drive in 2 screws. Please leave at least a dimension 0.15mm space to place the bracket between the screw
header and wall.
4. Place the Base-unit on the wall, so that the holes on the bracket matches the 2 unfixed screws on the wall..
Hoop the bracket on the screw and slide the Base-unit downwards until it is fixed in the 2 screw on the wall.
Antenna placement rules
The antennas should be oriented vertically, so perpendicular to the ceiling and parallel to the walls.
The antennas should be installed far enough (at least 50cm/1.6ft) from metallic surfaces to avoid
unwanted reflections and far enough (at least 1m/3.3ft) from other radio equipment that operates in the
same frequency range, e.g. other Wi-Fi access points, cordless telephone, microwave ovens,…. It is also
best to install antennas at least 15 cm (6 inches) from concrete walls.
The most favorable situation is a direct line of sight between antennas and Sensor-buttons TOUCH. Any
obstruction will cause the signal to follow a longer propagation path, which can result in performance
degradation.
Due to the particular radio pattern of the dipole antennas, the antennas should not be placed just above
potential positions of Sensor-buttons users. As a result, the advised position for the obstruction antennas
is at the side of the meeting room.
18
3.2 Wiring diagram
3.3 Power Connection
Supplied is a universal power supply for mains 100 – 240 VAC, 12 VDC/2A with different, external power
adapters.
Adapter types
1. Choose the appropriate power plug for your country (see www.iec.ch/worldplugs.) and slide it in power
supply
2. Connect the power adapter with the Base-unit.
3. Connect the power cable plug into the wall outlet.
TYP A (USA, Japan) Typ C (EU, except UK) Typ G (UK etc.) Typ I (Australia)
19
Note:
Once the Base-unit is powered, it starts up (booting). From now on please use the POWER button with Status LED
on front of Base-unit to switch on or off.
3.4 Video connection
1. Connect the HDMI-Output of Base-unit to a 4K or HD display by a quality HDMI cable.
2. Switch the Base-unit ON.
3. After started, the system shows the Home page.
3.5 Audio Connection
The WiFI of Sensor-button TOUCH transmits the audio output of the PC/Laptop, re-direct and send to the Baseunit together with the video signal. The audio will be output at line levels from mini jack socket 3.5 mm
connector and via the HDMI output connectors simultaneously. It is up to the user to decide whether to send the
audio signal together with the video signal.
Audio via HDMI output
When your display/projector is connected via HDMI and it support audio together with video than a separate
audio connection is not necessary. The audio signal is sent together with the video signal to the display.
20
Audio Output
Connect the audio (mini Jack 3.5mm) of the Base-unit with the meeting room’s sound system by using a fitting
cable.
PC/Laptop Sound
As default set, Klick & Show will mute the internal speaker of PC/Laptop and route the audio to the Base-unit,
after PC/Laptop is successfully mirroring desktop to the main screen, in order to avoid the repeated audio. When
transmission is stopped at Sensor-button, local loudspeaker will return to previous status.
Note:
to keep the internal speaker of PC/Lap muted while route the audio to the Base-unit, use the audio mute icon in the
status bar.
3.6 LAN connection
The Base-unit can be connected to a local network or directly to a PC/Laptop. For normal operation, a LAN
connection is not necessary. When needed, it is suggested to connect the Klick & Show to the internet.
Loading...