Kidde PE9 User Manual
Battery Powered
Photoelectric Smoke Alarm
• Model PE9 • Part Number PE9E
Description
The Kidde PE9E is a battery operated smoke alarm,
equipped with a photoelectric sensor, designed to alert
you and your family to the dangers of smoke and fire.
The PE9E includes a 9V, protecting you even during a
power failure. This unit is UL Listed and offers a 5-year
limited warranty.
Consumer Benefits
The Kidde PE9E photoelectric smoke alarm is battery
operated protecting you and your family even during
power outages. This unit does not require any wiring and
can be installed in minutes. The PE9E is equipped with a
test button that allows you to test the alarm’s electronic
circuitry, horn and battery function.
Features and Benefits
•Test Button – Tests unit’s electronic circuitry, horn and
battery function.
• Battery Operated (9V Battery Included) – Protects
even during a power outage.
• Low Battery Indicator – Smoke alarm will chirp in
the event of a low battery.
•Tamper Resist Locking Pin – Helps deters alarm
tampering or theft.
Test Button
Tests unit’s electronic circuitry, horn and battery function
Red LED
Flashes every 30-40 seconds to indicate that the smoke
alarm is operating
1394 South Third Street, Mebane NC 27302
1-800-880-6788 • www.kiddeus.com
Architectural and Engineering
Specifications
The smoke alarm shall be Kidde Model PE9 or approved equal. It
shall be powered by a 9V battery. The unit shall incorporate an
photoelectric sensor with nominal sensitivity of 2.06%/ft. The temperature operation range shall be between 40°F and 100°F (4°C
and 38°C) and the humidity operation range shall be 5% - 95%
relative humidity.
The unit shall provide optional tamper resistance that helps
deter removal of the unit from the wall or ceiling. The alarm shall
include a test button that will electronically simulate the presence
of smoke and cause the unit to go into alarm. This sequence tests
the unit’s electronics, battery and horn to ensure proper operation.
The unit shall include a piezoelectric horn that is rated at 85dB at
10 feet. The unit shall also include a low battery warning utilizing a
brief alarm chirp every 30-40 seconds along brief flashed from the
safety light for a minimum of seven (7) days.
The unit shall incorporate one red LED to indicate the alarm’s
current status and mode of operation. The red LED will indicate
one of two conditions:
Standby Condition: The red LED will flash every 30-40 seconds
to indicate that the smoke alarm is operating
properly.
Alarm Condition: When the alarm senses products of
combustion and goes into alarm, the red LED
will flash rapidly (one flash per second). The
rapid flashing LED and pulsating alarm will
continue until the air is cleared.
The unit shall at a minimum meet the requirements of UL217,
NFPA72, (chapter 11 2002 edition), The State of California Fire
Marshall, NFPA 101 (One and two family dwellings) Federal
Housing Authority (FHA), Housing and Urban Development (HUD).
It shall also include a 5-year manufacture’s limited warranty.
Battery Powered Photoelectric Smoke Alarm Model PE9
Distributed by:
Ordering Information
Gift Box UPC: 0-25417-16509-8
**Not for sale by individual unit
MASTER PACK
12
1
UNIT
Part Dimensions Case/ Layers/ Skid
Number I 2 of 5 Pack Quantity (w x d x h inches) Weight Skid Skid Weight
PE9** N/A Individual 5.2 x 1.5 x 5.2 1lb N/A N/A N/A
PE9E 20025417165092 Master Pack (12 units) 10.75 x 10.75x 5.5 12lbs 128 16 1635lbs
Technical Specifications
UPC: 0-25417-16509-8
Power Source: 9V Battery (included)
Audio Alarm: 85dB at 10ft
Temperature Range: 40˚F to 100˚F (4˚C to 38˚C)
Humidity Range: 5%-95% relative humidity (RH)
Sensor: Photoelectric
Size: 5” in diameter x 1.5” depth
Weight: .8lbs
Interconnects: No
LED: Red, normal operation
Warranty: 5 year limited
5" 1.5"
Loading...