Kidde NC-7100W User Manual
Dual Sensor, Battery Operated
Smoke Alarm
• PI9000 • Item Number 442007
Dual Sensor
Contains both a photoelectric and ionization
sensors providing the best protection in your home.
Hush
®
Feature
Temporarily silences nuisance alarms.
Red LED
Flashes every 30-40 seconds to indicate that
the smoke alarm is operating properly.
Test/Reset Button
Tests unit’s electronic circuitry and horn.
Description
The Kidde PI9000 is a 9V battery powered smoke alarm.
Both photoelectric and ionization sensors are built into to
alarm providing the best overall protection. This smoke
alarm functions as a single unit smoke alarm and features
Hush
®
, allowing you to quickly silence nuisance alarms.
The PI9000 is easy to install, no wiring is required.
Consumer Benefits
The Kidde PI9000, 9V battery powered smoke alarms
provides continuous protection against smoke and fire
hazards even during power outages. The dual ionization
and photoelectric sensors offer the best protection
against both fast flaming and slow smoldering fires.
The PI9000 also includes flashing LEDs to signal the alarm
is functioning properly, a low battery warning and a loud
85dB alarm. The Kidde PI9000 is UL listed and offers a
5-year limited warranty.
Features and Benefits
• Ionization Sensor – Protects best against fast flaming
fires.
• Photoelectric Sensor – Protects best against slow
smoldering fires.
• Battery Operated (9V battery included) – Provides
continuous protection even during power outages.
•Tamper Resistant – Deters from tampering or theft.
• Hush
®
Feature – Temporarily silences nuisance alarms.
• Red LED – Flashes every 30-40 seconds to indicate that
the smoke alarm is operating properly.
•Test/Reset Button – Tests smoke alarm circuitry and
horn.
1394 South Third Street, Mebane NC 27302
1-800-880-6788 • www.kiddeus.com
Architectural and Engineering
Specifications
The smoke alarm shall be Kidde Unit PI9000 or approved
equal. It shall be powered by a 9V battery. The unit shall
incorporate both an ionization smoke sensor and a photoelectric smoke sensor with a nominal alarm sensitivity of
1.99%/ft. The temperature operating range shall be
between 40˚F and 100˚F (4˚C and 38˚C) and the humidity
operating range shall be 5% - 95% relative humidity.
The alarm can be installed on the surface of any wall or
ceiling following the UL/NFPA/Manufacturer’s recommended
placement guidelines. The unit shall provide optional tamper resistance that deters removal of the unit from the wall
or ceiling.
The alarm shall include a test button that will electronically simulate the presence of smoke and cause the unit to
go into alarm. This sequence tests the unit’s electronics,
battery and horn to ensure proper operation.
The unit shall include a piezoelectric horn that is rated
at 85 decibels at 10 feet. In a smoke incident, the horn will
sound in the repetitive manner – three (3) beeps, a pause,
three (3) beeps, a pause.
The unit shall include the Hush
®
feature that silences
the unit. By pressing the Hush
®
button, it will desensitize
the unit form approximately 7 minutes if a nuisance condition occurs. The alarm will chirp every 30-40 seconds during this time and will automatically reset after approximately 7 minutes and sound the alarm if particles of combustion
are still present. The Hush
®
feature shall be overridden and
the unit will alarm if the smoke is too dense.
The unit shall also include a low battery warning utilizing a brief alarm chirp every 30-40 seconds for a minimum
of seven (7) days.
The alarm will utilize a red LED that shall flash once every
30-40 seconds to indicate the alarm is receiving power.
Dual Sensor, Battery Operated
Smoke Alarm
Unit Number PI9000
Item Number 442007
Technical Specifications
Unit Number: PI9000
Item Number: 442007
UPC Number: 0-47871-42007-0
Power Source: 9V Battery
Sensor: Dual Ionization and Photoelectric
Audio Alarm: 85dB at 10ft
Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C)
Humidity Range: 5%-95% relative humidity (RH)
Size: 5.75” in diameter x 1.8” depth
Weight: 1lb
Interconnects: No
LED: Red, normal operation
Warranty: 5 year limited
The unit shall at a minimum meet the requirements of
UL2034, UL217, NFPA72, (chapter 11, 2002 edition) The
State of California Fire Marshall, NFPA101 (One and two
family dwellings) Federal Housing Authority (FHA), Housing
and Urban Development (HUD). It shall also include a 5year manufacturer’s limited warranty.
UNIT MASTER PACK CUT CASE
1
3
20
Ordering Information
UPC: 0-47871-42007-0
Part Dimensions Case/ Layers/ Skid
Number I 2 of 5 Pack Quantity (w x d x h inches) Weight Skid Skid Weight
442007** N/A Individual 7.25 x 1.75 x 11 1lb N/A N/A N/A
442007-02 100 47871 42007 7 Master Pack (3 units) 8 x 6.25 x 12 3.4lbs 105 3 475lbs
442007-16 200 47871 42007 4 Cut Case (20 units) 24 x 16 x 12 21lbs 3 3 75lbs
**Not for sale by individual unit
5.75" 1.8"
Distributed by:
Loading...