AC Powered, Digital Display, Plug-In
Alerts user to replace
CO alarm after 7 years
Alerts user to replace CO alarm
after 7 years of operation
Carbon Monoxide Alarm
Part Number 900-0076 Model KN-COPP-3
DigitalDisplay
Displays the level of carbon monoxide the unit is sensing.
The unit updates this reading every 15 seconds.
Test/ResetButton
Tests unit’s electronic circuitry and horn and
resets the unit during alarm.
PeakLevelButton
Displays the peak CO level recorded by the alarm since
it was last reset or unplugged.
9VBatteryBack-Up
Provides protection during a power outage.
Description
The Kidde 900-0076 AC powered, plug-in carbon monoxide alarm utilizes sophisticated electronic components
and unmatched sensor technology to protect you and
your family from the dangers of CO. The 900-0076
includes a 9V battery backup that provides continuous
monitoring of CO levels, even during power outages,
when AC-only units are not providing protection.
The 900-0076 will detect and store measured data of
concentrated CO levels as low as 11 and up to 999 PPM
with its peak level memory display. This alarm gives you
several mounting options, including: direct-plug, a 6’
power cord or table top.
Consumer Benefits
The Kidde 900-0076 AC powered, plug in carbon monoxide alarm provides you and your family with warning
signal to protect against dangerous levels of carbon monoxide in your home. This alarm is easily installed in any of
your AC wall outlets. The digital display feature allows for
easy viewing of carbon monoxide levels from 30-999PPM
(parts per million). The 900-0076 is UL listed and offers a
7-year life and a 5-year limited warranty.
Features and Benefits
• DigitalDisplay – Displays the level of carbon monoxide
the unit is sensing. The unit updates this reading every
15 seconds.
• PeakLevelButton – Displays the peak CO level
recorded by the alarm since it was last reset or unplugged.
• 9VBatteryBack-up – Provides protection during
power outage.
• TestButtonFunctions –
– Tests the unit for proper operation
– Resets the Carbon Monoxide alarm
• LEDOperation –
– Blinking dot in lower right corner of display denotes
normal operation
– Digital readout displays CO concentration in parts
per million (30-900PPM)
In alarm condition you will hear 4 quick beeps,
5 seconds off, repeat.
AC Powered, Digital Display, Plug-In
Carbon Monoxide Alarm
Part Number 900-0076
Model KN-COPP-3
Architectural and Engineering
Specifications
The carbon monoxide alarm shall be Kidde Unit Number KN-COPP-3
(part number 900-0076) or approved equal. It shall be powered by a
120VAC, 60 Hz source along with a 9V battery back up. The temperature operating range shall be between 40˚F and 100˚F (4˚C and 38˚C)
and the humidity operating range shall be 5% - 95% relative humidity.
The CO sensor shall be of a fuel cell design and shall meet the
sensitivity requirements of Underwriters Laboratories UL2034 Single
and Multiple Station Carbon Monoxide Alarms. The unit shall provide
accuracy of +/-20% + 15 parts per million (ppm) when reading CO concentration levels.
The alarm shall include an attached plug that can be installed in any
outlet following the UL/NFPA/Manufacturer’s recommended guidelines.
The plug can be snapped into the back of the unit and shall be capable
of being rotated so the alarm remains vertical independent of whether
the electrical socket is mounted vertically or horizontally. In addition,
the alarm plug will have an attached extension cord so the unit can be
plugged into the wall outlet and then placed on a table or shelf.
The unit shall incorporate a digital display that meets the sensitivity
requirements of UL 2034. The display will identify the levels of CO in
parts per million (ppm) once that level reaches 30ppm (i.e.: “abnormal”
levels). The display will have a red dot in the lower right corner that will
blink to indicate the normal operation.
The alarm shall include a test button that will electronically simulate
the presence of CO and cause the unit to go into alarm. This sequence
tests the unit’s electronics to ensure proper operation.
In accordance with UL 2034, the CO sensor will not alarm to levels
of CO below 30 ppm and will alarm in the following time range when
exposed to the corresponding levels of CO.
70 ppm CO concentration 60 – 240 minutes
150 ppm CO concentration 10 – 50 minutes
400 ppm CO concentration 4 – 15 minutes
The alarm shall include a piezoelectric horn that is rated at 85
decibels at 10 feet. When the unit detects carbon monoxide, the
alarm pattern will be four (4) short beeps – followed by five (5) seconds
of silence – followed by four (4) short beeps. A number reading will
appear on the digital display identifying the measured CO concentration
(in ppm).
The unit shall include a peak level memory feature that will store
the peak CO level sensed since the unit was last reset. The peak CO
level stored in the unit’s memory shall be displayed (in ppm) on the
digital display by pressing the appropriate button on the unit. The
memory shall also be capable of being reset.
The unit shall also indicate a low battery warning utilizing each of
the following methods: a brief alarm chirp occurring approximately
once per minute and having “Lb” displayed on the digital display.
The unit shall be listed to UL 2034. It shall also include a 5-year
manufacturer’s limited warranty.
Technical Specifications
Part Number: 900-0076
Model: KN-COPP-3
UPC Number: 7-84908-00760-5
Power Source: 120VAC
Sensor: Electrochemical
Audio Alarm: 85dB at 10ft
Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C)
Humidity Range: 5%-95% relative humidity (RH)
Size: 6.0625”L x 3.75”W x 1.75”H
Weight: 1lb
Interconnects: No
Wiring: Plug-In
LED: Displays CO concentration in PPM
Warranty: 5 year limited
Ordering Information
UPC: 7-84908-00760-5
Part Dimensions Case/ Layers/ Skid
Number I2of5 PackQuantity (wxdxhinches) Weight Skid Skid Weight
900-0076** N/A Individual 7.25 x 2 x 10.75 1lb N/A N/A N/A
900-0076-01 107 84908 00760 2 PDQ (2 units) 8 x 6.25 x 11.25 3lbs 105 3 475lbs
900-0076-14 407 84908 00760 3 Master Pack (4 units) 7.5 x 12 x 11.5 5lbs 100 5 660lbs
900-0076-16 207 84908 00760 9 Cut Case (12 units) 14.75 x 17.5 x 12 14lbs 18 3 300lbs
900-0076-036 307 84908 00760 6 Power Tower (36 units) 20 x 24 x 41 (incl. pallet) 40lbs 3 3 120lbs
21005294 047871 05294 3 Bulk Pack (6 units) 12.5 x 6.25 x 7 6lbs 105 3 630lbs
**Not for sale by individual unit
1016 Corporate Park Drive
Mebane NC 27302
1-800-880-6788
www.Kidde.com
Distributed by:
KL-900-0076 sheet rev. 01-2009