Kicker S10C, S12C, S8C, S15C User Manual 2
SC
SOLOCLASSICSUBWOOFER
S8C / S10C / S12C / S15C
English Version
Versión Español
Subwoofer Solo Classic
Manual del Propietario
Deutsche Version
Solo Classic Subwoofer
Benutzerhandbuch
Version Française
Haut-parleur d’extrêmes graves Solo Classic
Manuel d’utilisation
2009 SC Multilingual e01.indd 12009 SC Multilingual e01.indd 1 7/29/2010 4:44:25 PM7/29/2010 4:44:25 PM
SOLOCLASSICSUBWOOFEROwner’sManual
Models:
S8C / S10C / S12C / S15C
Authorized KICKER Dealer:
Purchase Date:
Speaker Model Number:
Speaker Serial Number:
The KICKER Solo Classic subwoofers are built to bring you the best quality bass in a limited space, such
as behind the seat of your truck or in the hatchback of your car, leaving you with plenty of storage space
while offering high-performance and high-SPLs in smaller, sealed enclosures.
WIRING
Solo Classic subwoofers are available with dual 2 (ohm) or dual 4 voice coils. Both coils must be
connected to a source of amplifi cation. The dual 2 woofer will generate a 1 load if the coils are wired
in parallel (make certain that your amp is 1 stable) or a 4 load if wired in series. The dual 4 woofer
will provide a 2 load when wired in parallel or an 8 load when wired in series. The terminals with the
white dots are for the fi rst voice coil. The terminals with the solid-red and solid-black markings are for the
second voice coil. See Figures 1 and 2.
+
Figure 1
Coil 2-
Coil 1
Amplifi er
Speaker
Connection
Coil 1-
+
Series Wiring
Dual 2 Voice Coils = 4 Load
Dual 4 Voice Coils = 8 Load
Figure 2
Coil 1+ Amplifi er +
Speaker
Connection
Amplifi er -
Coil 2+
Speaker
Connection
Coil 2-
Coil 1-
Parallel Wiring
Dual 2 Voice Coils = 1 Load
Dual 4 Voice Coils = 2 Load
Coil 2+
Amplifi er Speaker
Connection
SPECIFICATIONS
Model S8C S10C S12C S15C
Nominal Impedance [Zn], ohm [per coil] 2 or 4 2 or 4 2 or 4 2 or 4
Resonance Frequency [fs], Hz 38 27.7 26 18
Power Handling Watts, Peak (RMS) 600 (300) 900 (450) 1200 (600) 1500 (750)
Sensitivity [SPLo], dB @ 1W, 1m 82.7 86.2 87.2 88
Total Q-Factor [Qts] .567 .368 .464 .391
Mechanical Q-Factor [Qms] 11.65 10.63 10.19 9.74
Electrical Q-Factor [Qes] .596 .381 .486 .407
Effective Excursion [EXmax™] in (cc) .44 (1.1) .61 (1.6) .61 (1.6) .69 (1.8)
DC Resistance [Re], ohm 6.91 6.98 7.04 7.84
2
2009 SC Multilingual e01.indd 22009 SC Multilingual e01.indd 2 7/29/2010 4:44:47 PM7/29/2010 4:44:47 PM
SOLOCLASSICSUBWOOFER
SPECIFICATIONS
Model S8C S10C S12C S15C
3
Equivalent Volume [Vas], ft
Net Displacement, in
Outer Frame Dimension, in (cm) 8 1/2 (21.5) 10 5/8 (27) 12 1/2 (31.7) 15 1/2 (39.4)
Mounting Depth, in (cm) 4 5/16 (11) 5 3/4 (14.6) 6 5/16 (16) 7 7/8 (20)
Hole Cut-Out Diameter 7 1/16 (17.9) 9 1/4 (23.5) 11 1/8 (28.3) 13 7/8 (35.2)
(L) .46 (13.14) 1.7 (48.20) 3.31 (93.8) 10.1 (285.95)
3
(cc) 46.15 (756.3) 82.43 (1350.8) 97.44 (1596.8) 153.45 (2514.6)
SEALED ENCLOSURE APPLICATIONS
The Solo Classic is designed to be used solely with smaller, sealed enclosures and will generate more
sound pressure than any competing subwoofer on the market. The outlined sealed enclosure designs
give the smoothest response with increased energy at the lowest frequencies, 20 to 30Hz. These designs
deliver large amounts of highly-accurate bass and can be driven with punishing levels of amplifi er power.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. Do not make
the airspace greater than the recommended enclosure volume, as damage may occur. If you prefer an
ultra-smooth bass response, you should loosely fi ll your Solo Classic enclosure with poly-fi l stuffi ng. The
use of poly-fi l will slightly decrease effi ciency, but will deepen and extend the low frequency output.
Use 3/4” (1.9cm) or thicker MDF (medium density fi berboard) and seal the joints
with silicone. Use the “template” inside your Solo Classic’s shipping carton
to mark the mounting hole, then cut directly on the line. These designs need
internal bracing. Add triangular bracing between each of the larger unsupported
panels, making certain to account for the added volume displacement. See
Figure 3.
For more advice on box building, refer to your Authorized Kicker Dealer, or click on the Support tab on
the Kicker homepage, www.kicker.com. Please e-mail support@kicker.com or call Technical Support at
(405) 624-8583 for specifi c or unanswered questions.
Figure 3
Panel Dimensions for Sealed Enclosures using 3/4” (1.9cm) thick MDF (See Figure 4)
3
Model Volume ft
S8C .33 ft
S10C .66 ft
S12C .88 ft
S15C 1.25 ft
NOTE: All specifi cations and performance fi gures are subject to change.
Please visit www.kicker.com for the most current information. To get the
best performance from your new KICKER Subwoofer, we recommend using
genuine KICKER Accessories and Wiring. Please allow two weeks of break-in
time for the subwoofer to reach optimum performance.
(L) Panel A in. (cm) Panel B in. (cm) Panel C in. (cm)
3
(9.34L)
10x10 (25.4x25.4) 10x8 (25.4x20.3) 8x8.5 (20.3x21.6)
3
(18.69L) 12x12 (30.5x30.5) 12x10.5 (30.5x26.7) 10.5x10.5 (26.7x26.7)
3
(24.92L) 13x13 (33x33) 13x11.5 (33x29.2) 11.5x11.5 (29.2x29.2)
3
(35.4L) 16x16 (40.6x40.6) 16x10.25 (40.6x26) 10.25x14.5 (26x36.8)
B
Figure 4
A
C
stillwaterdesigns
P.O. Box 459 • Stillwater, Oklahoma 74076 • USA • (405) 624–8510
2009 SC Multilingual e01.indd 32009 SC Multilingual e01.indd 3 7/29/2010 4:44:49 PM7/29/2010 4:44:49 PM
3
NoticeD’utilisationSOLOCLASSICSUBWOOFER
Modèles:
S8C / S10C / S12C / S15C
Revendeur KICKER agréé:
Date d’acquisition:
Numéro de modèle de haut-parleur:
Numéro de série de haut-parleur:
Les subwoofers (haut-parleurs de graves) Solo Classic KICKER sont conçus pour apporter la meilleure
qualité de graves dans un espace confi né, comme derrière le siège d’un camion ou bien dans le haillon
arrière d’une voiture, laissant un grand volume de rangement tout en proposant des hautes performances
et des pressions acoustiques élevées dans des enceintes hermétiques de petit format.
CÂBLAGE
Les subwoofers Solo Classic sont disponibles avec deux bobines de 2 (ohms) ou deux bobines de 4
(ohms). Les deux bobines doivent être connectées à une source d’amplifi cation. Le woofer à 2 bobines
de 2 génère une charge d’un si les bobines sont câblées en parallèle (s’assurer que l’ampli est stable
à 1) ou une charge de 4 si elles sont câblées en série. Le subwoofer à deux bobines de 4 génère,
lui, une charge de 2 avec un câble en parallèle ou une charge de 8 avec un câblage en série. Les
bornes repérées ar des points blancs sont réservées à la première bobine. Les bornes repérées par des
traits rouges et des traits noirs sont réservées à la seconde bobine. Voir les fi gures 1 et 2.
Figure 1
Bobine 1
Amplifi cateur +
Haut-parleur
Connexion
Câblage en série
Doubles bobines de 2 = charge de 4
+
Doubles bobines de 4 = charge de 8
Bobine
-
2
Bobine 2
Bobine 1-
Amplifi cateur -
Haut-parleur
+
Connexion
Figure 2
Bobine
-
2
Bobine 1+
Amplifi cateur +
Haut-parleur
Connexion
Bobine 1-
Câblage en parallèle
Doubles bobines de 2 = charge de 1
Doubles bobines de 4 = charge de 2
Bobine 2+
Amplifi cateur -
Haut-parleur
Connexion
SPECIFICATIONS
Modèle S8C S10C S12C S15C
Impédance nominale [Zn], ohm [par bobine] 2 ou 4 2 ou 4 2 ou 4 2 ou 4
Fréquence de résonance [fs], Hz 38 27.7 26 18
Tenue en puissance Watts, Pic (RMS) 600 (300) 900 (450) 1200 (600) 1500 (750)
Sensibilité [SPLo], dB @ 1W, 1m 82.7 86.2 87.2 88
Facteur de qualité total [Qts] .567 .368 .464 .391
Facteur de qualité mécanique [Qms] 11.65 10.63 10.19 9.74
Facteur de qualité électrique [Qes] .596 .381 .486 .407
Excursion effective [EXmax™] en (cc) .44 (1.1) .61 (1.6) .61 (1.6) .69 (1.8)
Résistance CC [Re], ohm 6.91 6.98 7.04 7.84
4
2009 SC Multilingual e01.indd 42009 SC Multilingual e01.indd 4 7/29/2010 4:44:49 PM7/29/2010 4:44:49 PM
SOLOCLASSICHAUT-PARLEURD’EXTRÊMESGRAVES
Loading...