Kicker BassStation PT8, BassStation PH12, BassStation PT10, BassStation PHD12 Owner's Manual

LIVIN’ LOUD

Powered Subwoofer Enclosure

English Version

Versión Español

Subwoofer Autoamplificado

Deutsche Version

Aktivsubwoofer

Version Francaise

Caisson de Graves Actif

POWERED SUBWOOFER
ENCLOSURE Owner’s Manual

MODEL: PT8 / PT10 / PH12 / PHD12

Authorized KICKER Dealer:

Purchase Date:

Model Number:

Serial Number:

The space-saving KICKER BassStation™ Powered Enclosures offer the quickest and easiest way to add a
subwoofer to your vehicle. These systems have been meticulously fi ne-tuned by KICKER engineers to deliver
astounding performance and sound without the time-consuming setup required for a typical amp-sub upgrade.

Model: PT8 PT10 PH12 PHD12

Subwoofer | inches [cm] 8 [20] 10 [25] 12 [30] 2x 12 [30]

RMS Power @ 14.4V [10% THD] 100W 100W 100W 200W

RMS Power @14.4V [d1% THD] 90W 90W 90W 160W

Net Weight | lbs. [kg] 13.8 [6.2] 18 [8.2] 25 [11.3] 43.2 [19.5]

Height | inches [mm] 11-1/4 [285] 12-13/16 [325] 14-15/16 [380] 14-15/16 [380]

Width | inches [mm] 16-15/16 [430] 19-5/16 [490] 16-13/16 [427] 31-1/2 [800]

Depth at top | inches [mm] 4 [102] 4-11/16 [118] 7-11/16 [195] 7-11/16 [195]

Depth at base | inches [mm] 6-5/8 [168] 7-11/16 [195] 11-1/4 [285] 11-1/4 [285]

All Models:

Frequency Response ± 1dB 25–120Hz

Signal-to-Noise Ratio >95dB

Crossover variable 50–120Hz, 12dB/octave lowpass

Subsonic Filter 24dB/octave @ 25Hz

Phase Switch 0° / 180°

Input Sensitivity low level: 125mV–5V

high level: 250mV–10V

KickEQ Bass Boost variable to +6dB @ 40Hz

Remote Bass included

Enclosure Type sealed

INSTALLATION

Mounting: Choose a structurally sound location to mount your KICKER powered subwoofer enclosure. Carefully
check the areas where the mounting straps will be placed. Make sure the mounting screws will not puncture
the gas tank/brake lines/wiring or interfere with any mechanical parts on the underside of the mounting surface.
Choose a location that allows at least 4” (10cm) of open ventilation for the amplifi er. If possible, mount the
enclosure in the climate-controlled passenger compartment.

2

BassStation™

mounting straps

1

included screws
and washers

3

2

4

If the supplied mounting hardware is not applicable to your installation, some other means of
securely attaching the enclosure to the vehicle must be used.

3