AMPHITHEATER
Models: 40iK5BT2
Owner’s Manual | English Manual del Propietario | Español
Manuel d’utilisation | Française
TM
High Performance Audio System
Compatible with most Bluetooth devices
iK5BT2 User Manual Translations Rev 6.indd 1iK5BT2 User Manual Translations Rev 6.indd 1 11/1/2013 3:31:03 PM11/1/2013 3:31:03 PM
2
ENGLISH
Setup
In the Box
power switch
reset button
Note: Press the reset button to perform a factory reset and clear Bluetooth
paired devices.
Status LED
LED color displays audio source:
• Blue - connected bluetooth device
• Purple - 1/8” (3.5mm) auxiliary input
LED status indicators:
• illuminated when the AMPHITHEATER is powered
• fl ashes blue when in Bluetooth pairing mode
• fl ashes white while initializing connection
• fl ashes when receiving commands from the remote
• breathes slowly when your speaker is muted
Status LED
iK5BT2 User Manual Translations Rev 6.indd 2iK5BT2 User Manual Translations Rev 6.indd 2 11/1/2013 3:31:06 PM11/1/2013 3:31:06 PM
3
ENGLISH
•8-band EQ
•customizable presets
•spatialization control
•autoplay
•device fi rmware updates
•prioritize devices for auto-connect
•enable bluetooth auto-connect
•disconnect
For advanced DSP control and access to even more features, download the
KICKSTART app from your device’s app store.
For more information on the KICKSTART app, visit www.kicker.com/KICKSTART
Before you play your device, make sure that the input is set to the correct
source. Touch the SOURCE button to select your audio source. When the
status LED is blue, your audio source is Bluetooth.
decrease / increase volume.
mute
SOURCE | PAIR
audio source select /
press and hold to pair
Pair and Connect Bluetooth® Devices
1. Press and Hold SOURCE | PAIR button on the dock or the remote control to
enter pairing mode (status LED fl ashes blue).
2. From your bluetooth device menu, make sure bluetooth is enabled. Scan for
devices and pair with Amphitheater BT.
If a code is required by your device, use [ 0000 ]
3. When your bluetooth device is paired and connected, the status LED will be
solid blue.
iK5BT2 User Manual Translations Rev 6.indd 3iK5BT2 User Manual Translations Rev 6.indd 3 11/1/2013 3:31:06 PM11/1/2013 3:31:06 PM
4
ENGLISH
Play Auxiliary Devices
Touch SOURCE to listen to music
from your external device. The auxinput is activated when the status
LED is purple.
iK5BT2 User Manual Translations Rev 6.indd 4iK5BT2 User Manual Translations Rev 6.indd 4 11/1/2013 3:31:06 PM11/1/2013 3:31:06 PM
5
ENGLISH
Using the Remote
USB Charging
Note: The rear USB port acts
solely as a power source for
charging or powering your USB
devices.
source
trebbass
iK5BT2
play / pause
mute
volume up/down
skip backward
(hold down to REW)
skip forward
(hold down to FF)
bass up/down
treble up/down
source select /
(hold to pair)
iK5BT2 User Manual Translations Rev 6.indd 5iK5BT2 User Manual Translations Rev 6.indd 5 11/1/2013 3:31:07 PM11/1/2013 3:31:07 PM
6
ENGLISH
Specifi cations
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all the instructions listed in this manual. Keep these instructions and heed all warnings. Follow all safety and
procedural recommendations to prevent damage to your self, your KICKER product, or your portable media device.
The AMPHITHEATER should not be used near water or in an environment where exposure to liquids is possible. This
includes but is not exclusive to areas where splashing, dripping, leaks, spills, and exposure to rain can occur. Liquid
containers should not be placed on or near the AMPHITHEATER. The AMPHITHEATER should not be cleaned with liquid
cleaners. Use only a dry cloth to clean the AMPHITHEATER.
Only use the AMPHITHEATER in areas with adequate open ventilation allowing at least 4” of space on all sides of the
AMPHITHEATER. Do not set the AMPHITHEATER on any surface or cover the AMPHITHEATER with any object that could
impede the airfl ow to and from the AMPHITHEATER. The AMPHITHEATER should not be placed near any source of heat.
The battery pack or batteries installed shall not be exposed to excessive heat. This includes but is not limited to stoves,
radiators, heating elements, electronic heat sources, and areas where excessive solar heat can be generated. Do not place
the AMPHITHEATER near any fl ame or place any fl ammable objects near the device.
The power outlet used to provide power to the AMPHITHEATER should be accessible at all times. The power cord
should be situated in a way that protects it from being pinched, walked on, tripped over, or accidentally pulled from the
electrical outlet or the electrical input on the AMPHITHEATER. Where the MAIN plug or an appliance coupler is used
as the disconnect device, the disconnect device shall remain readily operable. Do not run the cable through doorways
or underneath objects that could damage the wire or tear the insulating material surrounding the wire. Only use the
manufacturer supplied power supply with the AMPHITHEATER. We recommend using a surge protector/power conditioner
and unplugging the AMPHITHEATER during any electrical storms or situations that could cause voltage fl uctuations in the
electrical system.
DISCLAIMER: Bluetooth wireless audio compatible with most Bluetooth enabled phones, tablets and computers
•50W Stereo Amplifi er with DSP
•5”[127mm] Mid-bass Woofers
•3/4”[20mm] Silk-Dome Tweeters
•6”[152mm] Square Refl ex Subwoofer
24V-2.9A Power Supply
Freq. Response
40Hz—20kHz ±3dB
Weight
9.7 lbs [4.4kg]
• iPhone 5 • iPad (3rd and 4th Generation)
• iPhone 4S • iPad 2
• iPhone 4 • iPad
• iPhone 3GS • iPod touch® (2nd, 3rd, 4th, and 5th generation)
• iPhone 3G • iPod nano® (7th generation)
• iPad mini
19” [483mm]
9.14”
[232mm]
8.87”
[225mm]
Made for
iK5BT2 User Manual Translations Rev 6.indd 6iK5BT2 User Manual Translations Rev 6.indd 6 11/1/2013 3:31:07 PM11/1/2013 3:31:07 PM
Loading...