Kicker 41KPWB, 41KPWW Owner's Manual

™

KPw

|

41KPWB/41KPWW

Portable Wireless Speaker

Owner’s Manual | English

Manual del Propietario | Español
Bocina inalámbrica portátil KPw

Benutzerhandbuch | Deutsch
KPw Tragbarer drahtloser Lautsprecher

Manuel d’utilisation | Française
Haut-parleur sans fil portable KPw

Table of Contents

OPERATION 3–4 FUNCIONAMIENTO 7–8
TROUBLESHOOTING 5 RESOLUCIÓN DE PROBLEMAS 9
SPECIFICATIONS 6 ESPECIFICACIONES 10

BETRIEB 11–12 UTILISATION 15–16
PROBLEMBEHEBUNG 13 EN CAS DE DIFFICULTÉ 17

TECHNISCHE DATEN 14 CARACTÉRISTIQUES 18

Bluetooth wireless audio compatible with most Bluetooth enabled phones, tablets and computers
El audio inalámbrico de Bluetooth es compatible con la mayoría de los teléfonos, tabletas y computadoras con capacidad Bluetooth
Drahtloses Bluetooth-Lautsprechersystem, kompatibel mit den meisten Bluetooth-fähigen Telefonen, Tablets und Computern
Bluetooth wireless audio est compatible avec la plupart des ordinateurs, tablettes et téléphones équipés de la technologie Bluetooth

2

ENGLISH

The KICKER KPw is a water-resistant, Bluetooth® speaker system designed for portability without compromising
on sound quality. Use it anywhere tunes are desired!

Charging

It is important to fully charge the KPw for at least 5 hours before fi rst use. Peel back
the protective cap and, using the included USB cable, connect the power supply to
the micro USB charge port of the KPw. To maintain battery life, fully charge the
battery before storing for an extended period of time.

micro USB charge port power button

Powering

To turn on the KPw, press the power button. The KPw will play a system tone and
display a blinking green LED ring around the Bluetooth|Phone button. It is not necessary
to peel back the protective cap.

Bluetooth Pairing

To enter Bluetooth pairing mode at any time, press and hold the Bluetooth|Phone
button. The blue LED ring will blink. Search for devices from your Bluetooth device and

select ‘Kicker KPw’. The blue LED ring will be solid once your device is paired. Once
paired, the KPw will scan for and connect to your audio device when powered

on.

Bluetooth|Phone button

3

Volume Control

Use the volume slider to increase or decrease the volume level. When using the
auxiliary input, set the output level of your audio device as high as possible without
distorting, then adjust the volume slider of the KPw.

volume slider

1/8” [3.5mm] Aux Input battery status LED

Input Selection

The KICKER KPw will always default to Bluetooth input. If a connected Bluetooth source
is playing audio while you are attempting to use the 3.5mm auxiliary
input, the Bluetooth source will override the analog source. To use the Aux input, con­nect a 3.5mm stereo cable and stop playback from the connected Bluetooth device.

Speakerphone

The KPw will allow you to answer incoming
phone calls and communicate with the built-in
microphone, located on the front of the KPw
between the speakers. A system tone will
play when there is an incoming call. Press the
Bluetooth|Phone button when receiving
a phone call to answer. Audio playback will
resume when the call is completed.

BATTERY STATUS LED (RED)

Normal Battery Off
Low Battery 2 intermittent blinks
Charging Breathing
Finished Charging Solid

4

Troubleshooting

KPw is unresponsive or will not power on:

1. Check that the battery is fully charged by connecting the KPw to a known-good power source. Allow the
KPw to charge for at least 3.5 hours, then power on the speaker. The battery is full when the battery status
LED turns solid RED while charging.

2. Reset the KPw by pressing and holding the power button while inserting the USB charging cable. The

USB cable needs to be connected to a known-good power source.

KPw will not pair or connect:

1. If you have previously paired your device with the KPw, then please ‘Unpair’ or ‘Forget this Device’ per the

instructions for your audio device.

2. Press and hold the Bluetooth|Phone button for 5 seconds to enter pairing mode. Make sure your audio
device is scanning or in ‘discovery mode’, then select Kicker KPw.

Device paired and connected, but volume is low or inaudible:

Check the audio levels of both devices.

WARNING!

Keep out of reach of children. The content of this package includes small parts and cords that can cause choking or strangulation.

WARRANTY

KICKER products are warranted against defects. Duration and terms of warranty depend on the laws in the country in which it was
purchased. For details see your local KICKER Dealer or www.kicker.com/warranty.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.

5

SPECIFICATIONS

SPEAKERS

FREQUENCY RESPONSE: 180Hz–20kHz

INPUTS Bluetooth, 3.5mm Auxiliary

BATTERY 3.7V Lithium Ion, 3000mAh; 3.3 hours charge time

BLUETOOTH Version 3.0 + EDR, 10m [33ft] range

WEIGHT/DIMENSIONS

ACCESSORIES

C22.2 No.60065

Two 1-3/4” [44mm] Full Range Drivers
Two 2” [52mm] Passive Radiators

1.25 lbs [.57 kg]
Length - 7-11/16” [195mm]
Diameter - 2-11/16”[68mm]

Power supply with removable USB cable [600mm - Type A to USB
Micro]; Detachable carrying strap with carabineer

6