Agilent 59307A VHF Switch
Data Sheet
REAR PANEL
Address Switch Assembly: Switches A(sub)1 through A(sub)5 establish listen address on bus. Switches A(sub)6
and A(sub)7 are not used.
In/Out Terminals, Groups An and B: 50 ohm BNCs numbered to correspond with front panel switches. One of
four outputs for each input (or vice-versa) are selectable under front panel or program control.
Bus Connector: 24-pin connector (1251-3283: Amphenol 57-2-240-2); mates with cable HP 10631A/B/C.
FRONT PANEL
On Indicator: Light means the 59307A is powered.
Remote Indicator: Light means the 59307A is under the control of remote programming.
Local Reset: Pushbutton resets to front panel control unless "local lockout" command has been given.
Pusbuttons, Set A and Set B: Provide local control for switch settings. Light means that position is connected to
the common (regardless of whether 59307A is under remote or local control).
INTERFACE FUNCTIONS AND USES
Listener: Receives programming codes
Remote-Local: Switches operation to/from front panel pushbuttons and program codes.
PHYSICAL
Height: 101.6 mm (4 inches) including feet
Width: 212.9 mm (8.38 inches)
Depth: 294.6 mm (11.6 inches)
Rack Height: 88.9 mm (3½ inches); half-width module
Net Weight: 2.64 kg (5 lb, 13 oz)
Shipping Weight: 3.23 kg (7 lb 2 oz)
OTHER
Environmental:
Operating Temperature: 0° to 50° C;
Relative Humidity: to 95% at 40° C
Power Requirements: 50 to 400 Hz, 50 VA max; 115V or 230V ±10%.
Relay Settling Time: 20 ms
Relay Contacts: 0.5 am @ 25V <1 ns tr
VSWR: >40 dB @ 100 MHz
Loading...