Agilent Technologies
5000 and 6000 Series Oscilloscope
Probes and Accessories
Selection Guide Data Sheet
Table of Contents
Probe Compatibility Table . . . . . . . . . . . 2
Passive Probes . . . . . . . . . . . . . . . . . . . . . 3
High-voltage Passive Probes . . . . . . . . 4
Active Differential Probes . . . . . . . . . . . 5
Active Single-ended Probes . . . . . . . . . 8
Mixed Signal Oscilloscope
Logic Probes . . . . . . . . . . . . . . . . . . . . . . 10
Current Probes . . . . . . . . . . . . . . . . . . . . 12
Wedge Probe Adapters . . . . . . . . . . . . 14
PC Connectivity . . . . . . . . . . . . . . . . . . . 15
Agilent IntuiLink Software . . . . . . . . . . . 15
Miscellaneous Accessories . . . . . . . . 16
Testmobile . . . . . . . . . . . . . . . . . . . . . . . . . 16
Carrying Cases . . . . . . . . . . . . . . . . . . . . . 16
Rackmount Kit . . . . . . . . . . . . . . . . . . . . . . 16
Sales and Service . . . . . . . . . . . . . . . . . 17
To get the most out of your scope, you need the right
probes and accessories for your particular application. That’s why Agilent Technologies offers a complete family of innovative probes and accessories for
the 5000 and 6000 Series scopes. For the most up-todate and complete information about Agilent’s accessories, please visit our web site at
www.agilent.com/find/scope_probes
2
Probe Compatibility Table
For ordering information when
replacing your probe or probe
accessory: Refer directly to the
page number listed in the table of
contents for your probe model.
To assist you in selecting
the proper probe for your
application: Use our probe
compatibility table below to find
DSO5000A DSO5000A MSO/DSO6000A
[5]
MSO/DSO6000A
[4]
Probe Type Probe Model 100 MHz 300 - 500 MHz 100 MHz 300 MHz - 1 GHz
Passive Probes N2863A 10:1 300 MHz Recommended Compatible Compatible Compatible
Page 3 (included in 5000 Series 100/300 MHz)
10070C 1:1 20 MHz Recommended Recommended Recommended Recommended
10073C 10:1 500 MHz Compatible Recommended Compatible Recommended
(included in 6000 Series 300 MHz 1 GHz and 5000 Series 500 MHz)
10074C 10:1 150 MHz Recommended Compatible Recommended Compatible
(included in 6000 Series 100 MHz)
High-voltage Passive Probes 10076A 4 kV Recommended Recommended Recommended Recommended
Page 4
N2771A 30 kV Recommended Recommended Recommended Recommended
Active Differential Probes 1130A 1.5 GHz
[1]
Incompatible Recommended Incompatible Recommended
Page 5
N2772A 20 MHz (use with N2773A) Recommended Recommended Recommended Recommended
1141A 200 MHz (use with 1142A) Compatible Recommended Compatible Recommended
Active Single-ended Probes 1156A 1.5 GHz
[2]
Compatible Recommended Incompatible Recommended
Page 8
1144A 800 MHz (use with 1142A) Incompatible Recommended Incompatible Recommended
1145A 750 MHz 2-ch (use with 1142A) Incompatible Recommended Incompatible Recommended
Mixed Signal Oscilloscope 10085-68701 2x8-channel Recommended Recommended Recommended Recommended
Logic Probes
[3]
Page 10 54620-68701 16-channel Incompatible Incompatible Recommended Recommended
(included in MSO6000A)
Current Probes 1146A 100 kHz Recommended Recommended Recommended Recommended
Page 11
N2780A 2 MHz (use with N2779A) Recommended Recommended Recommended Recommended
N2781A 10 MHz (use with N2779A) Recommended Recommended Recommended Recommended
N2782A 50 MHz (use with N2779A) Recommended Recommended Recommended Recommended
N2783A 100 MHz (use with N2779A) Recommended Recommended Recommended Recommended
1147A 50 MHz Recommended Recommended Incompatible Recommended
[1] The 1130A probe amplifier supports both single- and differential-ended measurements. Higher bandwidth InfiniiMax probe model 1131A, 1132A, and 1134A are also
supported by 5000 and 6000 Series 300 MHz - 1 GHz models.
[2] The 1157A and 1158A are also supported by all 5000 and 6000 Series 300 MHz - 1 GHz models.
[3] Recommended for MSO6000A MSOs only.
[4] These Infiniium active probes are not supported by 5000 and 6000 Series – 1152A, 1153A, 1154A, 1155A, 1159A, 1168A, and 1169A.
[5] MSO/DSO6000A 100 MHz models do not support any Agilent Infiniium active single-ended or differential probes.
the probes that are recommended
for use with your 5000 and 6000
Series oscilloscope.
3
• Designed for optimal performance
with your Agilent 5000 and 6000
Series scope
• 1:1 and 10:1 attenuation
• 20 MHz to 500 MHz
Rugged, high-quality probes
at a reasonable price
Agilent 10070-family passive
probes are a great choice if you’re
looking for high quality at a very
reasonable price. These generalpurpose probes are designed
specifically to give you optimal
performance with your 5000
and 6000 Series oscilloscopes.
Ruggedized for general-purpose
measurements, they feature a
durable cable and a solid stainless
steel probe body encased with a
hard, fracture-resistant plastic.
They’re designed and tested to
ensure the probes operate in
the toughest of conditions The
N2863A low-cost passive probe
provides a 10:1 attenuation and
features a high input resistance
of 10 MΩ.
Probes come with the following
accessories:
• General-purpose retractable
hook tip hooks onto wires and
test points for hands-free
probing
• Ground bayonet provides
short, flexible ground lead for
high-frequency measurements
• General-purpose alligator clip
ground lead for versatile
grounding
• Color tags (2 orange, 2 white,
2 blue and 2 green) to place at
both ends of probe cable to
help you quickly identify probes
Accessories available for
passive probes
5081-7705 Probe-tip-to-BNC (m) adapter
8710-2063 Dual-lead adapter provides easy
connection from probe signal and
ground to fine-pitch probing
accessories.
10072A Fine-pitch probing kit includes
10 SMT clips and 2 dual-lead
adapters.
10075A 0.5 mm IC probing kit.
contains four 0.5 mm IC clips and
2 dual-lead adapters.
Passive Probes
Ordering information for Agilent
passive probes
All 10070-family passive probes
include one retractable hook tip,
one ground bayonet, one IC probing tip, one alligator ground lead
and a compensation screwdriver.
N2863A 10:1 300 MHz passive
probe
10070C 1:1 20 MHz passive probe
10073C 10:1 500 MHz passive
probe
10074C 10:1 150 MHz passive
probe
10072A Fine-pitch probing kit
10075A 0.5 mm IC probing kit
5081-7705 Probe-tip-to-BNC (m)
adapter
8710-2063 Dual-lead adapter
Specifications for Agilent 10070 Family Passive Probes
10070C 10073C 10074C N2863A
Bandwidth 20 MHz 500 MHz 150 MHz 300 MHz
Risetime (Calculated) < 17.5 ns < 700 ps < 2.33 ns < 1.16 ns
Attenuation Ratio 1:1 10:1 10:1 10:1
Input Resistance 1 MΩ 2.2 MΩ 10 MΩ 10 MΩ
(when terminated into 1 MΩ)
Input Capacitance Approx 70 pF Approx 12 pF Approx 15 pF Approx 12 pF
Maximum Input (dc + peak ac) 500 V CAT I 500 V CAT I 500 V CAT I 300 Vrms
400 V CAT II 400 V CAT II 400 V CAT II
Compensation Range None 6 - 15 pF 9 - 17 pF 5 - 30 pF
Probe Readout Yes Yes Yes Yes
Cable Length 1.5 m 1.5 m 1.5 m 1.2 m
10074C passive probe
4
High-voltage Passive Probes
• Ideal for measuring up to 30 kV
• Up to 250 MHz bandwidth
• 100:1 or 1000:1 attenuation
10076A high-voltage probe
The Agilent 10076A 4 kV 100:1
passive probe gives you the voltage and bandwidth you need for
making high-voltage measurements. Its compact design makes
it easier to probe today’s small
power electronics components
and its rugged construction
means it can withstand rough
handling without breaking.
Specifications for 10076A
Bandwidth 250 MHz (–3dB)
Risetime < 1.4 ns
(Calculated)
Attenuation Ratio 100:1
Input Resistance 66.7 MΩ (when
terminated into 1 MΩ)
Input Capacitance Approx 3 pF
Maximum Input 4000 Vpk
Compensation 6-20 pF
Range
Probe Readout Yes
Cable Length 1.8 m
10076A passive probe
N2771A high-voltage probe
10076A derating curve
N2771A derating curve
Ordering information for Agilent
high-voltage probe
10076A High-voltage probe
includes one retractable
hook tip, one ground
bayonet, one IC probing
tip, one alligator ground
lead and a compensation
screwdriver
N2771A High-voltage probe
includes alligator ground
lead, 1 sharp probe tip
10077A Accessory kit for 10076A
includes one retractable
pincher tip, one ground
lead, one insulation cap,
two measuring pins and
two colored tags
N2771A high-voltage probe
The N2771A is a 1000:1 divider
probe for the measurement of
fast high voltage signals. Up to
30 kV dc + peak ac, 10 kV rms.
The probe’s large size and rugged
construction provides superior
protection. The ground lead is fed
through the body of the probe
and protrudes behind the safety
barrier, keeping the ground connection away from the high voltage. Typical applications include
PMT’s, motor drives, high voltage
switches, magnatrons and modern projection systems.
Specifications for N2771A
Bandwidth 50 MHz (–3dB)
Risetime <7 ns
Attenuation Ratio 1000:1
Input Resistance 100 MΩ (when
terminated into 1 MΩ)
Input Capacitance 1 pF
Compensation Range 7-25 pF
Max. Voltage 15 kV dc, 10 kV rms,
30 kV dc + peak ac
Operating 0°C to +50°C, 80% RH
Temperature
Storage Temperature –20°C to +70°C, 90% RH
Dimensions 2 cm (max width of probe
stem after handle) x 33 cm
7.5 cm (max probe width
at probe handle) x 33 cm
4000 V
1000 V
100 V
Volts dc + peak ac
10 V
1 MHz
100 kHz
100000 V
10000 V
1000 V
U (VDC)
100 V
10 V
1 V
10 MHz
Frequency
100 MHz
250 MHz
100 kHz
16.614 k
Frequency
500 kHz
1 MHz
10 MHz
50 MHz
5
High Frequency Active Differential Probe
Agilent 1130A InfiniiMax High-Performance Active Probe System
• 1.5 GHz InfiniiMax probe system
• InfiniiMax probe amplifier supports
both differential- and single-ended
measurements for a more
cost-effective solution
• Unrivaled InfiniiMax probing
accessories support browsing,
solder-in, and socketed use models
at the maximum performance
available
• Compatible with 5000 and 6000
Series oscilloscopes (300 MHz 1 GHz only)
The 1.5 GHz 1130A InfiniiMax
probe amplifier is a perfect complement to the 6000 Series 1 GHz
models. Its 1.5 GHz bandwidth,
extremely low input capacitance
(0.32 pF), high common mode
rejection and the patented resistor probe tip technology provide
ultra low loading of the DUT and
superior signal fidelity. Agilent’s
innovative InfiniiMax 1130A
differential probe is the easiestto-use, and highest performance
probing system available for highspeed digital design, and represent a new industry standard for
accuracy, flexibility and reliability.
Designers can achieve 1 GHz system bandwidth in conjunction
with 1 GHz 6000 Series oscilloscopes even when manually
browsing with the probe or making hands-off measurements.
Optional solder-in probe heads
and solder-in sockets as well as
browser configuration provide
full bandwidth at the probe tip.
Specifications
Operating Characteristics
Probe Bandwidth (–3dB) > 1.5 GHz
Rise and Fall Time (10% to 90%) 233 psec
System Bandwidth (–3dB) 1130A with MSO/DSO610xA: 1 GHz
Input Capacitance Cm = 0.1 pF Cm is between tips
Cg = 0.34 pF Cg is ground for each tip
Cdiff = 0.27 pF Differential mode capacitance = Cm + Cg/2
Cse = 0.44 pF Single-ended mode capacitance = Cm + Cg
Input Resistance Differential mode resistance = 50 kΩ ±1%
Single-ended mode resistance = 25 kΩ ±1%
Input Dynamic Range ±2.5 V
Input Common Mode Range ±6.75 V dc to 100 Hz; ±1.25 V > 100 Hz
Maximum Signal Slew Rate 18 V/ns when probing a single-ended signal
30 V/ns when probing a differential signal
DC Attenuation 10:1 ± 3% before calibration on oscilloscope
10:1 ± 1% after calibration on oscilloscope
Offset Range ± 12.0 V when probing single-ended
Maximum Input Voltage 30 Vpeak, CAT I
ESD Tolerance >8 kV from 100 pF, 300 Ω HBM
Maximum Number of Probes 2
Supported by 5000/6000 Series
Agilent 1130A InfiniiMax probe offers you the highest performance available for
measuring differential and single-ended signals.
6
High Frequency Active Differential Probe (continued)
Agilent 1130A InfiniiMax High-Performance Active Probe System
Ordering Information for Agilent InfiniiMax 1130A probe and accessories
Probe Amplifier
1130A 1.5 GHz InfiniiMax probe amplifier (order one or more probe heads or connectivity kits per amplifier)
Connectivity Kits
E2669A InfiniiMax connectivity kit for differential/single-ended measurements.
E2668A InfiniiMax connectivity kit for single-ended measurements.
Individual Probe Heads
E2675A InfiniiMax differential browser probe head and accessories
E2676A InfiniiMax single-ended browser probe head and accessories
E2677A InfiniiMax differential solder-in probe head and accessories
E2678A InfiniiMax single-ended/differential socketed probe head and accessories
E2679A InfiniiMax single-ended socketed probe head and accessories
E2695A Differential SMA probe head
For more comprehensive
information about 1130A
InfiniiMax probe amplifier and
its accessories, refer to the
Agilent Infiniium 54800 Series
Osclloscope Probes, Accessories,
and Options data sheet with
Agilent literature number
5968-7141EN.
Loading...