Keys Fitness Series KF-R4.0 Owner's Manual
1
315-00134
09/18 Rev 9.0
Owner’s Manual
Customer Service
(800) 340-0482
Manufactured By:
Keys Fitness Products
4009 Distribution Drive
Suite 250
Garland, TX 75041
Read all precautions and instructions
in this manual before using this equipment.
CAUTION
KF-R4.0
Model Name : KF-R4.0
Serial Number :
Serial Number can be found in
the location specified above.
2
www.keystness.com
Table of Contents
Table of Contents 2
Important Safety Information 3
Assembly 4
Parts Identifier 4
Assembly Steps 7
Console Information 21
Workout Information 28
Parts List 32
Exploded View 34
Warranty 35
TABLE OF CONTENTS
THANK YOU for making this unit a part of your exercise program. Keys Fitness
Products assures the very best in value, appearance, durability and biomechanics.
This manual will guide you through the assembly process. If at any time you are
having trouble with the assembly or use of this product, then please contact us at
our Keys Fitness Products Help line. We have trained service technicians on site
to take care of you, our valued customer.
THANK YOU
REGISTRATION CARD
To avoid unnecessary delays in warranty parts and to insure that a permanent
record of your purchase is on file with our company, be sure to send in the warranty registration card or register on-line at www.keysfitness.com within 10 days of
purchase.
Keys Fitness series
M
oDel: KF-R4.0
QUeSTIoNS?
CAll
(800) 340-0482
Monday-Friday
8:30 am - 5:30 pm Central Time
3
www.keystness.com
WARNING!
Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or
persons with pre-existing health problems. The manufacturer or distributor assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
To reduce the risk of electrical shock, burns, re, or other possible injuries to the user, it is important to
review this manual and the following precautions before operation.
SAFETY PRECAUTIONS AND TIPS
1. It is the owner’s responsibility to ensure that all users of this unit have read the owner’s Manual and are familiar with warnings and
safety precautions.
2. This unit has a user maximum capacity of 300 pounds.
3. The unit should only be used on a level surface and is intended for indoor use only. The unit should not be placed in a garage,
patio, or near water and should never be used while you are wet. Keys Fitness Products recommends a mat be placed under the
unit to protect oor or carpet and for easier cleaning.
4. Follow safety information in regards to plugging in your unit. Do not run the power cord underneath your unit. Do not operate the
unit with a damaged or frayed power cord.
5. Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use the unit with bare feet, sandals,
socks or stockings.
6. Always examine your unit before using to ensure all parts are in working order.
7. Allow the unit to fully stop before dismounting.
8. Pets should never be allowed near the unit.
9. Do not leave children unsupervised near or on the unit.
10. Never operate the unit where oxygen is being administered, or where aerosol products are being used.
11. Never insert any object or body parts into any opening.
12. For safety and to prevent damage to your unit, no more than one person should use the unit at a time.
13. Always unplug the unit before cleaning and/or servicing. Service to your unit should only be performed by an authorized
service representative, unless authorized and/or instructed by the manufacturer.
14. Failure to follow these instructions will void the unit warranty.
Thank you for purchasing the Keys Fitness Products KF-R4.0! The quality product you have chosen was designed to meet your needs for cardio-
vascular exercise. Before you start, please read the owner’s Manual and become familiar with the operation of your new unit. Remember to take
time to perform stretching exercises, provided in this manual, to help avoid injury. If you are taking medication, consult your physician to see what
effect the medication will have on your exercise heart rate. If you have heart problems, you are not active, and/or are over the age of 35 years, do
not use the pre-set programs or start an exercise program without rst contacting and receiving approval from your physician. T
o avoid the risk
of electrical shock, always keep the console dry. Do not spill liquids on the console. Keys Fitness Products recommends a sealed water bottle for
beverages consumed while using the unit.
Important Safety information
4
www.keysfitness.com
Assembly
5
www.keystness.com
Parts Identifier
Prior to assembly, remove components from the box and verify that all the listed parts were supplied.
B
E
G
A2
H
C
D
Tools
F
Rear Main frame
Front Main frame
Back Rest
Seat
Upright
Handlebar
Front Stabilizer
Console
Upright post
Rear stabilizer
Seat Slide
Adjustment Handle
A1
A11
6mm
5mm
3mm
15mm
13mm
6
www.keystness.com
Parts Identifier
1/4"x40L
Seat
Tube Support
Side Handlebar - Right
Side Handlebar - Left
Pedal Strap - Left
Flat Washers
M8x16x1.2T
Allen Screws
M8 x 105
Set Screw
M6x8
Washer (Black)
M8x16x1.2T
Allen Screws
M8x20
Screws M4x15
Allen Screws
M6x10
Allen Screws
Allen Screws
M8x35
Spring Washers M8
Upright tube cover
Water bottle
Accessory
Tray - Left
Accessory
Tray - Right
I
J1-L
L-L
P
K
Allen Screws
M8 x15
Washer 8x4.5
J2-R
S4
S5
Pedal Strap - Right
L-R
Right Pedal
Left Pedal
M2
M1
N1
N2
N3
N4
N5
N6
N7
N8
N9
N10
N11
N12
S
Adapter
P1
Back Rest
Support Tube
7
www.keystness.com
A1
B
N7
C1
N2
N3
Assembly
1
ASSEMBLY FOR FRONT STABILIZER
Secure the front stabilizer (B) to the front
main frame (A1) using 2 allen screws (N7),
2 spring washers (N2) and 2 flat washers
(N3).
Note: Front stabilizer (B) is very similar to
rear stabilizer (C), but contains transport
wheels. Make sure not to get them mixed
up.
Use Tool
6mm
8
www.keystness.com
A2
N4
C
C1
N2
N3
Assembly
ASSEMBLY FOR REAR STABILIZER
Secure the rear stabilizer (C) to the rear
main frame (A2) using allen screws (N4),
2 spring washers (N2) and 2 flat washers
(N3).
Use Tool
6mm
Note:
After you finish the assembly for front and rear
stabilizer bars in order to add stability to the
unit, you may need to adjust the levelers that
are located on the bottom of the unit.
9
www.keystness.com
A1
A2
N1
N2
N3
A3
A4
C1
Assembly
3
ASSEMBLY FOR FRONT & REAR MAIN FRAME
Step 1:
Connect the front (A4) and rear (A3) pulse wires together.
Step 2:
Attach the front (A1) and rear (A2) main frames together - make sure all
wires are lined up correctly so that they are not pinched when assembling
the two frames together. Then secure, them using 6 allen screws (N1), 6
spring washers (N2) and 6 flat washers (N3).
Use Tool
6mm
10
www.keystness.com
Assembly
ASSEMBLY FOR UPRIGHT POST
Step 1:
Insert the upright post cover (I) into the upright tube
(D).
Step 2:
Connect the lower pulse wire (A4) with the upper
pulse wire (A34). Also, connect the lower sensor
wire (A36) with the upper sensor wire (A33).
Step 3:
Secure the upright post to the main frame (A1)
using 3 allen screws (N7), 3 spring washers (N2)
and 3 flat washers (N3).
Step 4:
Slide the upright tube cover (I) down to conceal
tube connection.
4
A1
I
D
N7
N2
N3
A33
A34
A4
A36
Note: Be careful not to pinch the sensor wire connection during assembly.
Use Tool
6mm
11
www.keystness.com
Assembly
5
A2
P
N1
J1
N8
J1-1
A10
R
A3
For Cosmetic
Purposes Only
P1
N1
N3
(Not used in this model)
ASSEMBLY FOR SEAT SUPPORT FRAME
Attach the seat support tube (P1) to the seat slide assembly (A10)
and secure it using 4 allen screws (N1).
ASSEMBLY FOR LEFT HANDLEBAR
Step 1:
Connect pulse wire (J1-1) from left handlebar
(J1) and pulse wire (A3) from seat slide assembly
(A10).
Step 2:
Mount the left handlebar (J1) to the seat slide assembly (A10) and secure with 4 allen screws (N8).
Use Tool
5mm
Use Tool
6mm
ASSEMBLY FOR BACK REST SUPPORT TUBE
Attach the back rest support tube (P) to the seat support tube (P)
and secure using 3 allen screws (N1) and 3 flat washers (N3).
Loading...