Keys Fitness KF-T4-0 User Manual
Owner’s Manual
CAUTION
KF-T4.0
Customer Service
(800) 340-0482
Manufactured By:
Keys Fitness Products
4009 Distribution Drive
Suite 250
Garland, TX 75041
Read all precautions and
instructions in this manual
before using this equipment.
Model Name : KF-T4.0
Serial Number :____________
Serial number can be found at
the location specified above.
100051
08/27 Rev 4.0
www.keystness.com
TABLE OF CONTENTS
Table of Contents
Important Safety Information
Assembly
Console Information
Workout Information
Troubleshooting
Parts Information
Warranty Information
KEYS FITNESS SERIES
MoDEl: KF-T4.0
QUESTIoNS?
CAll
800-388-0482
Monday - Friday
8:30 am - 5:30 pm Central Time
2
3
4
13
22
26
32
35
ThANK YOu
Thank You for making this unit a part of your exercise program.
Keys Fitness assures the very best in value, appearance, durability
and biomechanics.
This manual will guide you through the assembly process. If at any
time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Help line. We have
trained service technicians on site to take care of you, our valued
customer.
REGISTRATION CARD
To avoid unnecessary delays in warranty parts and to insure that a
permanent record of your purchase is on file with our company, be
sure to send in the warranty registration card or register on-line at
www.keysfitness.com within 10 days of purchase.
2
Table of Contents
Thank you for purchasing the Keys Fitness T4.0! The quality product you have chosen was
designed to meet your needs for cardiovascular exercise. Before you start, please read the
owner’s Manual and become familiar with the operation of your new unit. Remember to take
time to perform stretching exercises, provided in this manual, to help avoid injury. If you are
taking medication, consult your physician to see what effect the medication will have on your
exercise heart rate. If you have heart problems, you are not active, and/or are over the age of
35 years, do not use the pre-set programs or start an exercise program without rst contacting
and receiving approval from your physician. To avoid the risk of electrical shock, always keep
the console dry. Do not spill liquids on the console.
www.keystness.com
WARNING!
Before using this treadmill or starting any exercise program, consult your physician. This is especially important for persons
over the age of 35 and or persons with pre-existing health problems. The manufacturer or distributor assumes no responsibility
for personal injury or property damage sustained by or through the use of this product. To reduce the risk of electrical shock,
burns, fire, or other possible injuries to the user, it is important to review this manual and the following precautions before operation.
SAFETY PRECAuTIONS AND TIPS:
1. Always secure Safety Key firmly to waistband.
It is the owner’s responsibility to ensure that all users of this treadmill have read the owner’s Manual and are familiar with
2.
warnings and safety precautions.
3. This treadmill has a user maximum capacity of 300 pounds.
4. The treadmill should only be used on a level surface and is intended for indoor use only. The treadmill should not be placed in a
garage, patio, or near water and should never be used while you are wet. Keys recommends a treadmill mat be placed under the
treadmill to protect floor or carpet and for easier cleaning.
5. Follow safety information in regard to plugging in your treadmill. Keep the power cord away from the incline wheels and do not run
the power cord underneath your treadmill. Do not operate the treadmill with a damaged or frayed power cord.
6. Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use the treadmill with bare feet, sandals,
socks or stockings.
7. Always straddle the belt and allow it to start moving before stepping onto the belt.
8. Hold on to handrail when adjusting speed or other controls.
9. Always examine your treadmill before using to ensure all parts are in working order.
10. Allow the belt to fully stop before dismounting.
11. Pets should never be allowed near or on the treadmill.
12. Close supervision is necessary when this appliance is used by or near children, invalids or disabled persons.
13. Never operate the treadmill where oxygen is being administered, or where aerosol products are being used.
14. Never insert any object or body parts into any opening.
15. For safety and to prevent damage to your treadmill, no more than one person should use the treadmill at a time.
16. Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an authorized
service representative, unless authorized and/or instructed by the manufacturer
17. Failure to follow these instructions will void the treadmill warranty.
18. Never leave the treadmill unattended when plugged in. Unplug from outlet when not in use and before service or maintenance.
19. Always unplug this appliance immediately after using and before cleaning. To disconnect, turn all controls to the off position, then
remove plug from outlet.
Safety Information
3
Assembly
ww w.keysfitness.com
4
LEFT FENDER
RIGHT FENDER
CONSOLE
SAFETY KEY
ALLEN BOLTS M8*55
WASHER 9* 16* 1.6MM
ALLEN BOLTS
M8*15*15
PHILLIPS SCREW M6*30
WASHER 6.6* 12* 1.6MM
TOOL
6MM
MAIN FRAME
FENDER
SCREW/MISC
PHILLIPS SCREW M6*20
PHILLIPS SCREW ST4.2*16
END CAP LEFT
END CAP RIGHT
WASHER 11* 20*2MM
PHILLIPS SCREW ST4.2*13
Prior to assembly, remove components from the box and verify
that all the listed parts were supplied.
www.keystness.com
Parts Identifier
5
www.keystness.com
ALLEN BOLT M8*15*15
ALLEN BOLT M8*55
WASHER 9*16*1.6mm
ALLEN BOLT M8*15*15
ALLEN BOLT M8*55
WASHER 9*16*1.6mm
TOOL
6MM
ASSEMBLY FOR uPRIGhT TuBES
Step 1:
After unpacking the box, lift up the upright
tubes so that the screw holes are aligned.
Step 2:
Secure the upright connection with allen
bolts M8*55 (Qty 6) and flat washers
9*16*1.6 mm (Qty 6) at the upright tubes.
In the same area you will need to use allen
bolts M8*15*15 (Qty 4) and flat washers
9*16*1.6 mm (Qty 4) to secure as well.
1
Note: Be careful not to pinch the wire
harness.
Note: Hand tighten bolts until console
is attached and secure as indicated in
page 8. Then tighten with tool provided.
6
Assembly
RIGHT FENDER
LEFT FENDER
SCREW ST4.2*16
www.keystness.com
2
ASSEMBLY FOR FENDERS
Slide the right and left fenders down the upright
assembly.
ASSEMBLY FOR END CAPS
Slide the end caps onto the main frame
and secure them with screws ST4.2*16
(Qty 2).
Assembly
7
www.keystness.com
WASHER 9* 16* 1.6MM
CONSOLE
HARNESS
ALLEN BOLT
M8*15*15
TOOL
6MM
3
ASSEMBLY FOR CONSOLE
Step 1:
Attach console to the left and right uprights
using flat washers 9*16*1.6 mm (Qty 6) and
allen bolts M8*15*15 (Qty 6).
Step 2:
Connect the console harness wire to the
console.
Step 3:
Attach safety key to the console.
Note: Be careful not to pinch the wire con-
nection during assembly.
8
Assembly
SCREW ST4.2*13
PHILLIPS SCREW M6*30
PHILLIPS SCREW M6*20
WASHER 6.6* 12*1.6mm
TOOL
6MM
www.keystness.com
4
ASSEMBLY FOR FENDERS
Step 1:
lift up the base of the treadmill until the
pop pin located on the left side engages.
Step 2:
on the outer part of the fenders, secure the
right and left fenders with 2 phillips screws
M6*30 and 2 flat washers M6*12*1.6 mm.
Step 3:
on the inner part of the fender secure the
right and left fenders with 2 phillips screws
M6*20 and 2 flat washers M6*12*1.6.
ASSEMBLY FOR END CAPS
In the treadmill’s folded position, secure
the end caps with screws ST 4.2*13 (Qty
4).
Assembly
9
10
Congratulations!
You have completed the assembly of your
new Keys Fitness T4.0 Treadmill!
www.keystness.com
Moving Instructions
Caution! To avoid the risk of injury, never attempt to move the treadmill while it is in the unfolded operating position. To reduce the
possibility of injury while lifting, bend your legs and keep your back straight. As you raise the treadmill, lift using your legs, not your
back. In order to raise or lower the treadmill safely, you must be able to lift 45 pounds (20kg). It is suggested you always use the aid of
a second person when moving the treadmill.
With the treadmill in the folded locked position (safety latch is engaged) carefully tilt the treadmill back until it rolls freely on the wheels. Using
extreme caution, move the treadmill to the desired location. To set the treadmill down, carefully lower treadmill onto base in resting position. Do
not attempt to move the treadmill over an uneven or rough surface.
Note: The treadmill pictured below may not be identical to your particular model.
Moving Instructions
11
Loading...