Keys Fitness KF-R2.0 User Manual

Owner’s Manual

CAUTION

KF-R2.0

Customer Service

[phone]
Manufactured By:

Keys Fitness Products

4009 Distribution Drive
Suite 250
Garland, TX 75041

Read all precautions and instructions
in this manual before using this equip­ment.

Model Name : KF-R2.0
Serial Number :

Serial Number can be found at
the location specified above.

315-00133

09/18 Rev 11.0

1

www.keystness.com

TABLE OF CONTENTS

Table of Contents 2
Important Safety Information 3
Assembly 4

Parts Identifier 4
Assembly Steps 5

Console Information 17
Workout Information 24
Parts Information 28
Exploded View 30
Warranty 31

Keys Fitness series

oDel: KF-R2.0

M
QUeSTIoNS?

CAll

[phone]

Mon day- Friday

8:30am -5:30pm Central Time

THANK YOU

THANK YOU for making this unit a part of your exercise program. Keys Fitness

Products assures the very best in value, appearance, durability and biomechanics.
This manual will guide you through the assembly process. If at any time you are

having trouble with the assembly or use of this product, then please contact us at
our Keys Fitness Products Help line. We have trained service technicians on site
to take care of you, our valued customer.

REGISTRATION CARD

To avoid unnecessary delays in warranty parts and to insure that a permanent
record of your purchase is on file with our company, be sure to send in the war­ranty registration card or register on-line at www.keysfitness.com within 10 days of
purchase.

Table of Contents

2

WARNING!

Before using this unit or starting any exercise program, consult your physician. This is espe­cially important for persons over the age of 35 and/or persons with pre-existing health prob­lems. The manufacturer or distributor assumes no responsibility for personal injury or prop-

erty damage sustained by or through the use of this product.

shock, burns, re, or other possible injuries to the user, it is important to review this manual and the following precautions before operation.

To reduce the risk of electrical

www.keystness.com

SAFETY PRECAUTIONS AND TIPS

1. It is the owner’s responsibility to ensure that all users of this unit have read the owner’s Manual and are familiar with warnings and

safety precautions.

2. This unit has a user maximum capacity of 300 pounds.

3. The unit should only be used on a level surface and is intended for indoor use only. The unit should not be placed in a garage,
patio, or near water and should never be used while you are wet. Keys Fitness Products recommends a mat be placed under the

unit to protect oor or carpet and for easier cleaning.

4. Follow safety information in regards to plugging in your unit. Do not run the power cord underneath your unit. Do not operate the
unit with a damaged or frayed power cord.

5. Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use the unit with bare feet, sandals,
socks or stockings.

6. Always examine your unit before using to ensure all parts are in working order.

7. Allow the unit to fully stop before dismounting.

8. Pets should never be allowed near the unit.

9. Do not leave children unsupervised near or on the unit.

10. Never operate the unit where oxygen is being administered, or where aerosol products are being used.

11. Never insert any object or body parts into any opening.

12. For safety and to prevent damage to your unit, no more than one person should use the unit at a time.

13. Always unplug the unit before cleaning and/or servicing. Service to your unit should only be performed by an authorized service
representative, unless authorized and/or instructed by the manufacturer.

14. Failure to follow these instructions will void the unit warranty.
Thank you for purchasing the Keys Fitness Products KF-R2.0! The quality product you have chosen was designed to meet your needs for cardio-

vascular exercise. Before you start, please read the owner’s Manual and become familiar with the operation of your new unit. Remember to take
time to perform stretching exercises, provided in this manual, to help avoid injury. If you are taking medication, consult your physician to see what
effect the medication will have on your exercise heart rate. If you have heart problems, you are not active, and/or are over the age of 35 years, do

not use the pre-set programs or start an exercise program without rst contacting and receiving approval from your physician. To avoid the risk

of electrical shock, always keep the console dry. Do not spill liquids on the console. Keys Fitness Products recommends a sealed water bottle for
beverages consumed while using the unit.

Important Safety Information

3

Assembly

ww w.keysfitness.com

4

Front Frame

Rear Main frame

Front stabilizer

A

B

C

Rear stabilizer

D

Upright post

E

Console

G

Back Rest

Handlebar

F

Seat support tube

J

Seat

K1

K2

www.keystness.com

Prior to assembly, remove components from the box and verify
that all the listed parts were supplied.

Parts Identifier

5

1/4"x40L

Water Bottle Holder

Water Bottle

M1

Right Pedal

L - (L)

Side Handle bar (Left)

Allen Screws M8x15

Allen Screws (black)
M8x35

Allen Screws M8

Upright post cover

Seat slide adjustment handle

Allen Screws M8x20

Allen Screws M6x10

Tools

Flat Washers M8 x 16 x 1.2T

Screw M6x8

Spring Washers M8

N1

M3

L - (R)

Left Pedal

L1

L2

Left Pedal Strap

Right Pedal Strap

Flat Washers (Black)
M8x16x1.2T

Adapter

O

6 mm

5 mm

3 mm

13 mm

15 mm

N2

N3

N4

N5

N6

N7

N8

N9

N10

N11

H1

Side Handle bar (Right)

H2

N15

Allen Screws M8x35x2/5

www.keystness.com

Parts Identifier

6

D

N7

B

N2

N3

Use Tool

6mm

www.keystness.com

1

ASSEMBLY FOR REAR STABILIZER

Secure the rear stabilizer (D) to the rear main
frame (B) using 2 allen screws (N7), 2 spring
washers (N2) and 2 flat washers (N3).

Note: Front stabilizer (C) is very similar to rear

stabilizer (D) but contains transport wheels.
Make sure not to get them mixed up.

Assembly

7

www.keystness.com

B

A

B20

A10

N7

C

N2

N3

N1
N2

N3

Use Tool

6mm

ASSEMBLY FOR FRONT STABILIZER

Secure the front stabilizer (C) to the main
frame (A) using 2 allen screws (N7), 2
spring washers (N2) and 2 flat washers (N3)

8

ASSEMBLY FOR FRONT & REAR MAIN FRAME

Step 1:

Connect the front (A10) and rear (B20) pulse wires together.

Step 2:

Attach front (A) and rear (B) main frames together, making sure all wires
are lined up correctly so that they are not pinched when assembling the
two frames together. Then, secure the frame connection at the top and
the 2 sides using 4 allen screws (N1), 4 spring washers (N2) and 4 flat
washers (N3).

Note:

After you finish the assembly for front and rear stabilizer bars in order to add stability to
the unit, you may need to adjust the levelers that are located on the bottom of the unit.

Assembly

www.keystness.com

E2

E3

N3

N2

A10

A8

N9

A

E

N7

3

ASSEMBLY FOR UPRIGHT POST

Step 1:

Insert the upright post cover (N9) to the upright post (e)
from the bottom side.

Step 2:

Connect the lower pulse wire (A10) with the upper pulse
wire (e2). Also, connect the lower sensor wire (A8) with
the upper sensor wire (e3).

Step 3:

Attach upright tube (e) to the front main frame (A).
Then, secure them with 3 allen screws (N7), 3 spring
washers (N2) and 3 flat washers (N3).

Step 4:

Slide the upright tube cover (N9) down to conceal tube
connection.

Note:

Be careful not to pinch the sensor wire connection
during assembly.

Assembly

9

www.keystness.com

F

E

N11

N5

L-(L)

L-(R)

CLOCKWISE

COUNTER­CLOCKWISE

L-(R)

L-(L)

L1

L2

Use Tool

6mm

Use Tool

15mm

13mm

4

ASSEMBLY FOR UPRIGHT HANDLEBAR

Attach the handlebar (F) to the upright post (e) and secure it with 2 allen
screws (N5) and 2 flat washers (N11).

ASSEMBLY FOR PEDALS

10

Assembly

Step 1:

Attach left pedal strap (l1) to left pedal
(l-l) and right pedal strap (l2) to right
(l-R) pedals.

Step 2:

Thread the left pedal (l-l) into the pedal
crankshaft in the counter-clockwise
direction.

Step 3:

Thread the right pedal (l-R) into the pedal
crankshaft in the clockwise direction.